# Contact Analysis > Use when the task is FEA contact, penalty or Lagrange methods, contact stiffness, penetration, friction, stick-slip, master-slave contact, node-to-surface, or tied interfaces in bolted joints and bearing contacts. Compute finite element contact analysis quantities for aircraft structure: determine normal contact forces with the penalty method from contact stiffness and penetration, estimate penalty stiffness from the contacting element properties, check Lagrange multiplier enforcement of zero penetration, apply Coulomb friction to categorize stick or slip, and run penetration control until penetration is under tolerance. The skill covers master-slave and node-to-surface gaps, tie constraints, and bolted joint and bearing contacts. Trigger: contact analysis, fea contact, penalty method, lagrange multiplier, contact stiffness, penetration, coulomb friction, stick-slip, master-slave, node-to-surface, tie constraint, bolted joint, bearing contact. - Skill: `ashfordeou/contact-analysis` (Agent Skill, multi-file: 3 files) - Install (CLI): `npx skillmds@latest add ashfordeou/contact-analysis` - Raw SKILL.md: https://api.skillmd.com/api/skills/ashfordeou/contact-analysis/raw - Safety review: pending - Works with: Claude Code, Claude.ai, OpenAI Codex - Category: Productivity - License: Apache-2.0 - Author: ashfordeOU (https://skillmd.com/u/ashfordeou) - Updated: 2026-09-17 - Page: https://skillmd.com/skills/ashfordeou/contact-analysis --- # Contact Analysis (structures/fem/contact-analysis) Use when the task is finite element contact analysis of aircraft structure: penalty versus Lagrange enforcement, contact stiffness and penetration control, Coulomb friction with stick-slip states, master-slave and node-to-surface formulation, tie constraints, and typical bolted joint and bearing contact applications. This leaf sits beside structures/fem/calculix-nonlinear (which owns the nonlinear solver workflow into which contact runs are fed) and structures/fem/calculix-linear (linear static checks); it computes the contact mechanics quantities, not the global solve. ## Domain quick reference - Penalty method: the normal contact force is the penalty stiffness times the penetration, F_n = k_pen * p. Contact is soft: a small penetration is always present, and larger stiffness drives it down at the cost of ill-conditioning. - Lagrange method: the zero penetration constraint is enforced exactly with a Lagrange multiplier (the contact pressure). No penetration parameter is tuned, but the active set must be iterated and the method can introduce zero-energy modes and convergence cost. - Penalty stiffness estimate: k_pen = alpha * E * A / L from the softer contacting member (E modulus, A contact area, L characteristic length), with alpha typically 10 to 1000 times the underlying element stiffness scale. - Penetration control: for an applied normal load F, penetration p = F / k_pen; raise the stiffness by a factor and re-check until p falls under the accepted tolerance. - Master-slave (node-to-surface): slave nodes are projected onto the master surface; the signed gap is the projection distance along the master surface normal. A negative gap is penetration, a positive gap is separation. - Coulomb friction: the maximum tangential (shear) force is f_max = mu * |F_n|. When the trial shear is below f_max the interface sticks (elastic shear, no relative sliding); at f_max it slips (sliding with frictional resistance at the limit). - Tie constraints: rigidly bond two surfaces (no separation, no sliding) within a relative displacement tolerance, for example bonded patch doublers or potted inserts. - Typical aerospace applications: bolted joint lug-to-bolt bearing contact, bushing-sleeve interfaces, and fastener head-to-structure clamping; FAR-25 and CS-25 set the certification context for the strength checks that follow the contact solution. ## Workflow 1. Identify the contacting pairs and the softer member; record the unit convention (N/mm is assumed here). 2. Estimate the penalty stiffness with contact_stiffness_estimate. 3. Compute the signed gap of each slave node against its master surface with node_to_surface_gap. 4. Get the normal force from the gap with penalty_contact_force, or check exact enforcement with lagrange_contact_check when the constraint must hold with zero penetration. 5. If penetration exceeds the accepted tolerance, raise the stiffness with penetration_control until the penetration is under tolerance. 6. Compute the tangential (shear) response with friction_force: the result is categorized as sticking or slipping. 7. Check tied interfaces with tie_constraint_check where the joint is bonded. 8. Confirm the deterministic checks with the contract test scripts/test_contact_analysis.py. ## Penalty versus Lagrange The penalty method converts the contact inequality constraint into a spring: F_n = k_pen * p with penetration p. It is simple to implement and keeps the tangent stiffness positive definite, but the result depends on the user-chosen stiffness and always shows a small, non-physical penetration. The Lagrange method carries the penetration to zero by treating the contact pressure as an unknown, at the cost of active-set iteration and possible ill-conditioning. In practice, augmented Lagrange methods combine both: a Lagrange multiplier base with a small penalty regularizer that stabilizes the iteration. This leaf implements the two pure methods and lets the caller compare them on the same gap input. ## Friction and stick-slip Coulomb friction caps the tangential force at mu times the absolute normal force. The interface is categorized as sticking when the trial shear stays below the cap (the tangential force equals the trial value, relative sliding is zero) and slipping when the trial exceeds it (the tangential force saturates at the cap and sliding occurs). Because the cap scales with the normal force, a joint carrying a high clamping load resists far more shear before it slips than the same joint unloaded in the normal direction. ## Worked example Steel bolt bearing contact: E = 200,000 N/mm^2, contact area A = 100 mm^2, characteristic length L = 10 mm, alpha = 100: - k_pen = 100 * 200,000 * 100 / 10 = 2.0e8 N/mm. - Applied bearing load F = 100 kN: penetration p = F / k_pen = 100,000 / 2.0e8 = 5.0e-4 mm, well under the 0.01 mm tolerance. - Penalty force check: k_pen * p = 2.0e8 * 5.0e-4 = 100 kN, matching the applied load (equilibrium). - Friction with mu = 0.2: f_max = 0.2 * 100 kN = 20 kN. A trial shear of 8 kN sticks (friction force 8 kN, no sliding); a trial shear of 25 kN slips (friction force saturates at 20 kN). - Lagrange on the same pair: penetration enforced to zero; the gap check reports enforced when the penetration is within 1e-9. ## Pitfalls - Tuning only the penetration and ignoring conditioning: the penalty force F_n = k_pen * p depends on the user-chosen stiffness, and a stiffness raised far above the element scale (alpha of 10-1000) drives penetration down at the cost of ill-conditioning - the penalty method never gives exact zero penetration. - Expecting zero penetration from the penalty method: penetration is always present and only Lagrange (or augmented Lagrange) enforces the constraint exactly; the worked 5.0e-4 mm penetration is under tolerance, not zero. - Reading the gap sign backwards: node-to-surface gaps are signed along the master normal - negative is penetration, positive is separation - so a flipped sign turns a penetrating node into an open contact. - Using the wrong friction branch: the interface sticks when the trial shear is below mu * |F_n| and slips when it reaches the cap; a high clamping load resists far more shear than the same joint unloaded in the normal direction, and the cap uses the absolute normal force. - Mixing units at the interface: the module assumes N/mm (the worked bolt case uses E in N/mm^2 and A in mm^2); feeding SI Pa and m shifts the stiffness estimate by the unit ratio. - Confusing contact with the global solve: this leaf computes contact quantities (forces, gaps, friction, tie checks); the nonlinear solver workflow that carries a contact run belongs to calculix-nonlinear. ## Related leaves - structures/fem/calculix-linear: linear static stress and margin of safety checks downstream of the contact solution. - structures/fem/calculix-nonlinear: nonlinear solver workflow where contact runs live. - structures/fem/truss-analysis: simple element-level checks for the members the contact model connects. - structures/composites/composite-bolted-joints: bolted joint strength evaluation that consumes bearing contact forces. ## Behavior contract (gate 3) Run the deterministic contract test (stdlib unittest, offline): python3 scripts/test_contact_analysis.py The test covers the penalty stiffness estimate, penalty force at zero penetration and at finite penetration, Lagrange enforcement tolerance, Coulomb stick and slip states, friction with zero and negative normal force, penetration control convergence, node-to-surface signed gaps, tie constraint tolerance, and invalid-input edge cases. ## Compliance - Standards referenced, not reproduced: FAR-25 and CS-25 are public airworthiness regulations, named for certification context only; both resolve in standards-map.yaml with reference-only: true. - compliance: STANDARDS-REF, gated: false.