# Rotorcraft Blade Element Hover Performance > Use when you must determine the blade-element hover performance of a helicopter main rotor: the thrust coefficient from the collective pitch schedule, rotor solidity, lift-curve slope and Betz tip loss factor, the inflow ratio from the uniform-inflow hover closure, the collective pitch required to hover at a target thrust coefficient, the torque coefficient with its induced and profile split, and the rotor shaft torque, shaft power and hover figure of merit from the coefficients. Produces a hover blade-element summary and a collective pitch polar across the pitch range of the same rotor. Trigger: blade element theory, thrust coefficient, torque coefficient, collective pitch, tip loss factor, hover figure of merit. - Skill: `ashfordeou/rotorcraft-blade-element-hover-performance` (Agent Skill, multi-file: 3 files) - Install (CLI): `npx skillmds@latest add ashfordeou/rotorcraft-blade-element-hover-performance` - Raw SKILL.md: https://api.skillmd.com/api/skills/ashfordeou/rotorcraft-blade-element-hover-performance/raw - Safety review: pending - Works with: Claude Code, Claude.ai, OpenAI Codex - Category: Coding & Dev Tools - License: Apache-2.0 - Author: ashfordeOU (https://skillmd.com/u/ashfordeou) - Updated: 2026-09-17 - Page: https://skillmd.com/skills/ashfordeou/rotorcraft-blade-element-hover-performance --- # Rotorcraft Blade-Element Hover Performance (flight-mechanics/performance/rotorcraft-blade-element-hover-performance) Use when you must determine the blade-element hover performance of a helicopter main rotor: the rotor thrust coefficient C_T and inflow ratio from the pitch schedule, the collective pitch required to hover, and the torque coefficient (induced plus profile split), rotor shaft torque and figure of merit that follow from the coefficients. This is the pitch-to-coefficients chain, theta0 to C_T/C_Q to torque/FM, the blade-element member of the rotorcraft vertical-flight group: the sibling flight-mechanics/performance/rotorcraft-hover-performance leaf takes thrust as input and is momentum-only (no C_T, C_Q, theta0, lift-curve slope, twist or tip-loss factor in its logic), while this leaf integrates the blade loading over the pitch schedule with the Betz tip loss factor B. Modeled in pure Python, stdlib only, deterministic. The blade-element and momentum models agree exactly at B = 1: shaft power from the torque coefficient equals P_ideal + P_profile of the momentum model and the figure of merit from coefficients equals the momentum power ratio, which the contract test verifies against the sibling module. ## Domain quick reference All quantities are SI. Rotor radius R, disk area A = PI * R^2, tip speed Vtip = Omega * R, solidity sigma, mean blade drag coefficient Cd0, lift-curve slope a (1/rad), thrust T. The hover thrust equals the rotorcraft weight: T = m * G, G = 9.80665 m/s^2. - Blade-element thrust coefficient: C_T = (sigma * a / 2) * (theta0 * B^3 / 3 - lambda * B^2 / 2), with theta0 the collective pitch (rad) and B the Betz tip loss factor in (0, 1]. The B^3/3 term integrates the pitch loading over the blade; the B^2/2 term removes the inflow incidence. - Thrust coefficient from thrust: C_T = T / (rho * A * Vtip^2), the standard definition used to close the hover state. - Inflow closure (uniform inflow in hover): lambda = v_i / Vtip = sqrt(C_T / 2). The hover momentum balance C_T = 2 * lambda^2 closes the inflow ratio directly from the thrust coefficient. - Collective for a target C_T: theta0 = (3 / B^3) * (2 * C_T / (sigma * a) + lambda * B^2 / 2) with lambda = sqrt(C_T / 2). Tip loss below 1 raises the required collective at fixed thrust coefficient (about 6% at B = 0.97 on the worked rotor). - Torque coefficient: C_Q = lambda * C_T + sigma * Cd0 / 8, the induced contribution lambda * C_T carrying the inflow work and the profile contribution sigma * Cd0 / 8 the section drag. - Rotor shaft torque: Q = C_Q * rho * A * Vtip^2 * R in N m. - Rotor shaft power: P = Q * Omega = C_Q * rho * A * Vtip^3 in W. At B = 1 with the closure lambda this equals the momentum hover total P_ideal + P_profile of the sibling leaf, and each term matches its momentum counterpart separately. - Figure of merit from coefficients: FM = C_T^1.5 / (sqrt(2) * C_Q), the same ratio the momentum leaf forms from powers. - Defaults: rho = 1.225 kg/m^3 at sea level, lift-curve slope a = 5.73 1/rad. Modelled twist is zero (untwisted, constant-chord blade integral); the assumption is recorded here because the spec formula integrates theta0 as constant along the blade. - FAR 29 frames the rotorcraft certification context; the relations above are standard engineering methodology, summary-only. ## Workflow 1. Fix the operating point: rotor radius R, rotorcraft mass m (hover thrust T = m * G), density rho, solidity sigma, mean blade drag coefficient Cd0, tip speed Vtip, lift-curve slope a and Betz tip loss factor B. 2. Get the thrust coefficient from the thrust with the standard definition C_T = T / (rho * A * Vtip^2), or start from a target C_T directly. 3. Close the inflow with inflow_ratio_from_ct(c_t), giving lambda = sqrt(C_T / 2). 4. Recover the required collective with collective_for_thrust_coefficient(c_t, solidity, lift_slope, tip_loss) and convert to degrees; compare against the published 5-10 deg hover collective band. 5. Split the torque coefficient with torque_coefficient(c_t, lambda, solidity, drag_coefficient) and confirm the induced term lambda * C_T plus the profile term sigma * Cd0 / 8 gives the total. 6. Get the rotor shaft torque with rotor_torque(c_q, rho, area, tip_speed, radius) and the shaft power with rotor_power_from_torque; both consume the same arguments. 7. Compute the figure of merit with figure_of_merit_from_coefficients(c_t, c_q) and check it against the momentum power ratio for the same rotor. 8. For a single-call verdict on one hover state run hover_blade_element_summary(thrust_N, radius_m, rho, solidity, lift_slope, drag_coefficient, tip_speed, tip_loss, collective_rad), which returns the full dict and verifies the supplied collective reproduces the thrust-derived C_T (mismatched inputs raise ValueError). For a sweep run collective_pitch_polar(collectives_rad, ...), which closes lambda by fixed-point iteration for every entry. 9. Confirm the deterministic checks with the contract test scripts/test_rotorcraft_blade_element_hover_performance.py. ## Worked example The reference rotor (identical to the momentum hover-leaf example): R = 5.0 m, m = 2200 kg, rho = 1.225 kg/m^3, sigma = 0.08, Cd0 = 0.012, Vtip = 220 m/s, a = 5.73 1/rad. Real module outputs: - Thrust: 2200 * 9.80665 = 21574.63 N; disk area PI * 5.0^2 = 78.54 m^2. - Thrust coefficient: C_T = 0.0046331 (spec bound about 0.00463). - Inflow ratio: inflow_ratio_from_ct gives lambda = 0.048131, the hand value sqrt(C_T / 2). - Collective at B = 1: theta0 = 0.132839 rad = 7.61 deg (spec about 0.1328 rad, 7.6 deg; within the 5-10 deg band). - Collective at B = 0.97: theta0 = 0.140874 rad = 8.07 deg (spec about 0.1409 rad, 8.1 deg), 6.05% higher than at B = 1. - Torque coefficient split: induced lambda * C_T = 2.2299e-4, profile sigma * Cd0 / 8 = 1.2000e-4 exactly, total C_Q = 3.4299e-4 (spec about 3.43e-4). - Rotor torque: Q = 7985.97 N m (spec about 7986 N m). - Rotor shaft power: P = 351382.76 W, equal to the momentum hover P_ideal + P_profile = 228447.84 + 122934.92 W to 1.7e-16 relative. - Figure of merit: FM = 0.650140 (spec about 0.650), equal to the momentum FM ratio 228447.84 / 351382.76 = 0.650140. - Round trip: feeding the recovered theta0 back through thrust_coefficient returns C_T to 1e-9 relative at both B = 1 and B = 0.97. ## Verification - Confirm hover_blade_element_summary on the reference rotor returns thrust_coefficient 0.0046331, inflow_ratio 0.048131, torque_coefficient_total 3.4299e-4, rotor_torque_Nm 7985.97, rotor_power_W 351382.76 and figure_of_merit 0.650140, with the induced plus profile split summing to the total to 1e-12. - Confirm collective_for_thrust_coefficient returns 0.132839 rad at B = 1 and 0.140874 rad at B = 0.97, and that both round-trip through thrust_coefficient to the target C_T within 1e-9. - Confirm the cross-leaf identity at B = 1: power from the torque coefficient equals the momentum P_ideal + P_profile within 1e-6 relative and the coefficient FM equals the momentum power ratio within 1e-9 (both verified against the sibling module by the contract test). - Confirm tip-loss monotonicity: B = 0.97 requires a higher collective than B = 1.0, and higher B gives a higher C_T at fixed collective. - Confirm the ideal-limit check FM <= 1: at the ideal C_Q = C_T^1.5 / sqrt(2) the figure of merit is exactly 1, and the worked FM sits inside (0, 1). - Confirm every non-positive solidity, lift slope, drag coefficient, tip speed, radius, rho, thrust, and every tip loss outside (0, 1], negative collective, negative c_t and non-positive c_q raises ValueError, and that a collective which does not reproduce the thrust-derived C_T is rejected by the summary. - Confirm determinism: repeated runs return identical floats (no RNG, stdlib only). - Run the contract test offline: python3 scripts/test_rotorcraft_blade_element_hover_performance.py (34 tests, deterministic). ## Pitfalls - Letting the Betz factor out of (0, 1]: B = 1 is the no-tip-loss limit where the blade-element power equals the momentum P_ideal + P_profile, and B = 0.97 already raises the required collective about 6%; B outside (0, 1] raises ValueError. - Mixing radians and degrees for collective: the module works in radians (theta0 = 0.132839 rad = 7.61 deg on the reference rotor) and the published 5-10 deg band is in degrees; compare after conversion, not on the raw number. - Calling the summary with a collective that does not reproduce the thrust: hover_blade_element_summary verifies the supplied collective reproduces the thrust-derived C_T and raises ValueError on a mismatch, so pass one consistent hover state rather than a sweep point. - Splitting the torque coefficient incorrectly: the induced term is lambda*C_T and the profile term sigma*Cd0/8; they must sum to the total to 1e-12, so do not double count profile drag when you already have a total C_Q. - Reading the figure of merit above 1: FM = C_T^1.5/(sqrt(2)*C_Q) sits in (0, 1) for a real rotor and equals exactly 1 only at the ideal C_Q; an FM at or above 1 flags a coefficient inconsistency. ## Related leaves - flight-mechanics/performance/rotorcraft-hover-performance: the momentum-theory power leaf; the B = 1 cross-leaf identity ties the two models. - flight-mechanics/performance/rotorcraft-blade-flapping-dynamics: blade dynamics sibling that also consumes theta0. - flight-mechanics/performance/rotorcraft-tail-rotor-sizing. ## Behavior contract (gate 3) Run the deterministic contract test (stdlib unittest, offline): python3 scripts/test_rotorcraft_blade_element_hover_performance.py The test covers the worked example with the spec magnitude bounds (C_T about 0.00463, inflow about 0.0481, theta0 about 0.1328 rad at B = 1 and 0.1409 rad at B = 0.97, C_Q about 3.43e-4, Q about 7986 N m, P about 351383 W, FM about 0.650), the closed-form formulas checked against independent hand computation, the collective round trip to C_T at 1e-9, the torque split identity with the profile term equal to sigma * Cd0 / 8 exactly, the power and FM cross-leaf identities against the momentum hover leaf, tip-loss monotonicity, figure-of-merit bounds with the ideal limit, exact dict keys of the summary and polar chains, the fixed-point inflow closure of the polar, run-to-run determinism, absence of random or external imports, and ValueError rejection of every non-physical input in the validation list. ## Compliance - Standards referenced, not reproduced: FAR 29 (rotorcraft airworthiness, certification context only). The blade-element hover relations above are standard engineering methodology, summary-only per standards-map.yaml. - compliance: STANDARDS-REF, gated: false.