# Rotorcraft Vertical Climb Performance > Use when you must compute the vertical climb performance of a rotorcraft rotor with axial momentum theory: the climb induced velocity from the hover induced velocity and the climb rate, the induced power through an induced power factor, the total rotor power required in a vertical climb as induced plus profile power, and the maximum vertical rate of climb for an available shaft power. Produces the induced velocity in climb, the climb power required, the climb power margin and the maximum vertical rate of climb that gate a rotorcraft climb check at a chosen density altitude. Momentum theory only: uniform inflow, no ground effect, climb only. Trigger: rotorcraft vertical climb performance, axial momentum theory, climb induced velocity, rotorcraft climb power, vertical rate of climb, available shaft power, climb power margin. - Skill: `ashfordeou/rotorcraft-vertical-climb-performance` (Agent Skill, multi-file: 3 files) - Install (CLI): `npx skillmds@latest add ashfordeou/rotorcraft-vertical-climb-performance` - Raw SKILL.md: https://api.skillmd.com/api/skills/ashfordeou/rotorcraft-vertical-climb-performance/raw - Safety review: pending - Works with: Claude Code, Claude.ai, OpenAI Codex - Category: Coding & Dev Tools - License: Apache-2.0 - Author: ashfordeOU (https://skillmd.com/u/ashfordeou) - Updated: 2026-09-17 - Page: https://skillmd.com/skills/ashfordeou/rotorcraft-vertical-climb-performance --- # Rotorcraft Vertical Climb Performance (flight-mechanics/performance/rotorcraft-vertical-climb-performance) Use when you must compute the vertical climb performance of a rotorcraft rotor with axial momentum theory: the climb induced velocity falls below the hover induced velocity as the climb rate grows, and the power needed to climb is the induced power through the induced power factor k plus the profile power. This leaf pairs with flight-mechanics/performance/rotorcraft-hover-performance (the hover state at zero climb rate, which owns the hover power terms) and with flight-mechanics/performance/rotorcraft-forward-flight-performance (the speed-dependent power split in level flight). Axial momentum theory only: uniform inflow, no ground effect, vertical climb only with climb rates zero or positive, and no wake distortion modeling in descending flight (the model rejects negative climb rates). ## Domain quick reference All quantities are SI. The rotor thrust equals the rotorcraft weight in the climb check: T = m * g0, g0 = 9.80665 m/s^2. Default density rho = 1.225 kg/m^3 is sea level; pass the density at the chosen density altitude to re-run the climb check there. - Disk area: A = PI * R^2. - Hover induced velocity (momentum theory): v_h = sqrt(T / (2 * rho * A)). - Climb induced velocity at vertical climb rate Vc: v_i = -Vc/2 + sqrt((Vc/2)^2 + v_h^2). The induced velocity decreases as the climb rate grows, and v_i < v_h for any positive Vc. - Profile power (average section drag model): P_profile = (1/8) * rho * sigma * Cd0 * A * Vtip^3, with sigma the rotor solidity, Cd0 the mean blade drag coefficient and Vtip the tip speed. - Total climb power: P = k * T * (Vc + v_i) + P_profile, where k is the induced power factor (default 1.15) applied to the climb induced power for wake and tip losses. At Vc = 0 this reduces to the hover total power k * T * v_h + P_profile. - Climb power margin: margin = P_available - P_required. - Maximum vertical rate of climb: solve P(Vc) = P_available for Vc. Climb power is strictly increasing in Vc because dP/dVc = k*T*(1 + d(v_i)/dVc) > 0 with d(v_i)/dVc in (-1/2, 0), so a bisection on [0, 200] m/s finds the root. A vertical climb is impossible when the available power sits below the hover total power at Vc = 0; that case raises ValueError. When the available power exceeds the power required at the 200 m/s upper bracket, the bracket value is returned as an excess-power case. - FAR 29 frames the rotorcraft certification context; the relations above are standard engineering methodology, summary-only. ## Workflow 1. Fix the operating point: rotor radius R, rotorcraft mass m, density rho at the density altitude, solidity sigma, mean blade drag coefficient Cd0, tip speed Vtip, induced power factor k, the vertical climb rate Vc and the available shaft power. 2. Get the disk area with disk_area(radius) and the climb thrust T = m * G0 (thrust equals weight). 3. Compute the hover induced velocity with hover_induced_velocity(thrust, area, rho), the baseline for the climb inflow. 4. Compute the climb induced velocity with climb_induced_velocity(thrust, area, climb_rate, rho); verify it sits below the hover value. 5. Compute the profile power with profile_power(rho, area, solidity, drag_coefficient, tip_speed). 6. Combine with climb_power(thrust, climb_rate, induced_velocity, profile_power, k) for the total rotor power required in the climb. 7. Compare against the shaft power with climb_power_margin(available, required); a negative margin means the climb cannot be sustained. 8. For the climb limit, call max_vertical_climb_rate(thrust, area, rho, available_power, profile_power, k) to get the maximum vertical rate of climb from the excess shaft power. 9. For a single-call verdict run vertical_climb_performance(weight_kg, radius, rho, solidity, drag_coefficient, tip_speed, k, climb_rate, available_power), which returns the full dict and propagates every ValueError from the primitives. 10. Confirm the deterministic checks with the contract test scripts/test_rotorcraft_vertical_climb_performance.py. ## Worked example A helicopter at 2200 kg mass with a 5.0 m radius rotor climbing vertically at 5 m/s at sea level: rho = 1.225 kg/m^3, solidity 0.08, Cd0 = 0.012, tip speed 220 m/s, k = 1.15, available power 600 kW. Running vertical_climb_performance(2200.0, 5.0, 1.225, 0.08, 0.012, 220.0, 1.15, 5.0, 600000.0): - Thrust: 2200 * 9.80665 = 21574.63 N. - Disk area: PI * 5.0^2 = 78.54 m^2. - Hover induced velocity: v_h = 10.59 m/s (within the 9.5-11.5 m/s band). - Climb induced velocity at 5 m/s: v_i = 8.380 m/s (within 7.5-9.5 m/s, below the hover value as momentum theory requires). - Profile power: P_profile = 122935 W (within 100000-150000 W). - Climb power at 5 m/s: P = 1.15 * 21574.63 * (5 + 8.380) + 122935 = 454900 W (within 420000-490000 W). - Climb power margin at 600 kW: 600000 - 454900 = 145100 W. - Maximum vertical rate of climb at 600 kW: 13.40 m/s (within 11-16 m/s), found by bisection on the power balance. - Hover total power (Vc = 0): k * T * v_h + P_profile = 385650 W (within 350000-430000 W); the 600 kW case clears it with room to climb. At a density altitude where rho drops to 1.06 kg/m^3 the induced velocities rise and the climb power check must be re-run at the chosen density. ## Verification - Confirm vertical_climb_performance(2200.0, 5.0, available_power = 600000.0) with the sea-level defaults returns hover_induced_velocity 10.59 m/s, climb_induced_velocity 8.380 m/s, profile_power_W 122935, climb_power_W 454900, climb_power_margin_W 145100 and max_vertical_climb_rate 13.40. - Confirm the hover round trip: climb_power(thrust, 0.0, v_h, profile_power) equals k * T * v_h + P_profile, the hover total power. - Confirm monotonicity: the climb induced velocity at 2 m/s exceeds the value at 10 m/s, and the climb power strictly increases with the climb rate. - Confirm max_vertical_climb_rate raises ValueError when the available power sits below the hover total power (300 kW with this rotor), and returns the 200.0 m/s upper bracket when the available power exceeds the power required at 200 m/s (about 5.10 MW for this rotor, so 6 MW returns 200.0). - Confirm every non-positive radius, thrust, area, density, solidity, drag coefficient, tip speed and induced power factor, and every negative climb rate, induced velocity, profile power and available or required power raises ValueError. - Confirm determinism: repeated runs return identical floats (no RNG, stdlib only). - Run the contract test offline: python3 scripts/test_rotorcraft_vertical_climb_performance.py (35 tests, deterministic). ## Pitfalls - Calling with a negative climb rate: axial momentum theory applies to climb only in this leaf and negative Vc raises ValueError - descending flight (wake distortion, vortex ring) is out of scope. - Expecting the climb induced velocity above the hover value: v_i = -Vc/2 + sqrt((Vc/2)^2 + v_h^2) always sits below v_h for positive climb rate and decreases as Vc grows. - Reading max_vertical_climb_rate = 200.0 as the exact limit: when the available power exceeds the power required at the 200 m/s upper bracket the bracket value is returned as an excess-power case, not a converged root. - Available power below the hover total: a vertical climb is impossible (the power balance has no root) and max_vertical_climb_rate raises ValueError at 300 kW for the worked rotor, which needs about 385.7 kW to hover. - Reusing sea-level numbers at altitude: re-run the climb check at the density altitude - induced velocities rise as density drops (rho = 1.06 example), changing v_i and the climb power. ## Related leaves - flight-mechanics/performance/rotorcraft-hover-performance: the hover state at Vc = 0, which owns the hover induced velocity, hover power terms and disk loading context that seed this climb model. - flight-mechanics/performance/rotorcraft-forward-flight-performance: the sibling rotor leaf for the speed-dependent power split in level flight, adjacent in the rotorcraft performance pass. - flight-mechanics/performance/oei-climb-gradient: the one-engine- inoperative climb gradient for multi-engine rotorcraft, the longitudinal companion to this vertical-axis check. - flight-mechanics/performance/climb-performance: the fixed-wing excess-thrust climb case; this leaf owns the rotorcraft vertical momentum-theory climb only. ## Behavior contract (gate 3) Run the deterministic contract test (stdlib unittest, offline): python3 scripts/test_rotorcraft_vertical_climb_performance.py The test covers the worked example with the spec magnitude bounds (hover induced velocity 9.5-11.5 m/s, climb induced velocity 7.5-9.5 m/s, profile power 100000-150000 W, climb power 420000-490000 W, hover total power 350000-430000 W, max climb rate 11-16 m/s), the momentum-theory closed forms, the climb induced velocity decrease with climb rate, the hover round trip, the induced power factor model and its default constant, the cubic tip speed scaling of profile power, the max_vertical_climb_rate bisection with the below-hover-power ValueError and the excess-power upper bracket, the climb power margin sign, exact dict keys and primitive consistency of vertical_climb_performance, run-to-run determinism, absence of random or third-party imports, and ValueError rejection of every non-physical input in the validation list. ## Compliance - Standards referenced, not reproduced: FAR 29 (rotorcraft airworthiness, certification context only). The axial momentum theory climb relations above are standard engineering methodology, summary-only per standards-map.yaml. - compliance: STANDARDS-REF, gated: false.