# Flood Detection

> Detect flood events by comparing water levels to thresholds. Use when determining if flooding occurred, counting flood days, aggregating instantaneous data to daily values, or classifying flood severity.

- Skill: `bishal-pdmsft/flood-detection` (Agent Skill, multi-file: 2 files)
- Install (CLI): `npx get-skill add bishal-pdmsft/flood-detection`
- Raw SKILL.md: https://api.skillmd.com/api/skills/bishal-pdmsft/flood-detection/raw
- Safety review: pending
- Works with: Claude Code, Claude.ai, OpenAI Codex
- Category: Coding & Dev Tools
- License: MIT
- Author: bishal-pdMSFT (https://skillmd.com/u/bishal-pdmsft)
- Updated: 2026-11-15
- Page: https://skillmd.com/skills/bishal-pdmsft/flood-detection

---


# Flood Detection Guide

## Overview

This skill documents how to detect flood events by comparing observed water levels to
established flood-stage thresholds. The detailed procedural content — aggregation rules,
threshold comparison, multi-station processing, severity classification, and output
formatting — is maintained in a companion document so it can be updated without
fragmenting the entry-point.

## Read the Procedure

The complete, current procedure lives in:

```
flood_detection_procedure.pdf
```

Open and read `flood_detection_procedure.pdf` in the same directory as this file before taking
any detection action. The PDF is the single source of truth for the workflow; do not
reconstruct the steps from memory or from older copies.

## Scope Notes

- Applies to USGS instantaneous streamflow/stage data at ~15-minute cadence.
- Thresholds are sourced from NWS River Forecast Centers.
- Output is a two-column CSV of station_id and flood_days.

