# Draw The Owl > Decompose large agent-built features into atomic, reviewable chunks using a diff-size budget (~1500 lines) as the signal. Use this whenever implementing a non-trivial or net-new feature with an agent, when an agent has produced a huge diff/PR that is painful to review, when the user says a change is "too big", "too much to review", or "should be broken up", or when planning how to parallelize feature work across multiple agents. Reach for it on any "build this whole feature" request, even when the user does not explicitly ask to decompose — getting under the review-ability threshold is the goal. Skip it for small, self-contained features that will obviously land well under the threshold, and for large-but-mechanical sweeps (renames, codemods, lockfile churn) where the diff is big but trivially reviewable. - Skill: `blacktop/draw-the-owl` (Agent Skill) - Install (CLI): `npx skillmds@latest add blacktop/draw-the-owl` - Raw SKILL.md: https://api.skillmd.com/api/skills/blacktop/draw-the-owl/raw - Safety review: pending - Works with: Claude Code, Claude.ai, OpenAI Codex - Category: AI & ML - Author: blacktop (https://skillmd.com/u/blacktop) - Updated: 2026-09-09 - Page: https://skillmd.com/skills/blacktop/draw-the-owl --- # Draw the Owl A pattern for building features with agents, from Mitchell Hashimoto. The core insight: **the binding constraint on agent feature work is not whether the code runs, it's whether a human can review it.** A diff you cannot review is a diff you cannot trust, no matter how green the tests are. So the loop optimizes for shrinking changes below your review-ability threshold rather than for getting a working feature in one shot. The name is the "draw the owl" meme — *step 1: draw two circles; step 2: draw the rest of the owl.* The first prompt is deliberately that underspecified: ask for the whole feature, loosely guided, and expect garbage. The garbage is not the deliverable. It is reconnaissance — it reveals the true shape of the problem so you can carve it into pieces worth reviewing. ## When to Use - Implementing a non-trivial or net-new feature with an agent. - An agent produced a diff that is hard to review with confidence — usually because it is large (very roughly >1500 reviewable lines), but judge the review effort, not the raw line count. - The user calls a change "too big", "too much to review", or asks to "break this up" / "split this into smaller PRs". - Planning how to spread feature work across several agents in parallel. - Any "just build the whole thing" request where you want a maintainable, reviewable result rather than one giant unreviewable commit. ## When NOT to Use - Small, self-contained changes that will obviously land well under the threshold — a bug fix, a refactor of one module, a config tweak. Decomposing these is pure overhead. - Mechanical, uniform sweeps (rename, codemod, dependency bump) where the diff is large but trivially reviewable because every hunk is the same shape. Size is a proxy for review effort, not the target itself. - Pure exploration or research where no code is being merged. - Work that is already a clean stream of small commits — you are past the problem this solves. ## The Loop ### 1. Draw the owl Prompt the agent to implement the whole feature, loosely guided. Do not over-specify; the point is to see what the agent reaches for and what the change actually touches. Expect the result to be wrong, sprawling, or both. That is the expected outcome, not a failure — you are buying information about the problem's shape, not a mergeable change. ### 2. Measure against the budget Look at the diff size. - **Under ~1500 lines:** review it and iterate normally. You are below the review-ability threshold; the owl is good enough to refine in place. Stop here — do not decompose for its own sake. - **Over ~1500 lines:** the change is too big to review well. Do not try to review it anyway. Decompose (step 3). The 1500-line number is a heuristic, not a law — a proxy for "more than I can hold in my head in one review pass." Adjust it to the codebase and to your own review stamina: dense, invariant-heavy core code warrants a smaller budget; boilerplate-heavy or well-tested surface area can tolerate more. What matters is having *a* threshold and respecting it, because the failure mode it guards against is rubber-stamping a diff you didn't actually understand. Discount trivially-reviewable bulk (generated files, lockfiles, mass renames) when sizing — those lines don't cost review effort. Size is standing in for *review effort*; judge the effort, not the raw count. ### 3. Decompose into atomic tasks — and generalize them Ask the agent to break the problem into atomic, incremental, independently reviewable tasks. **Do this yourself in parallel** and compare — the agent's decomposition and yours will disagree in informative ways. The critical, human-shaped step: **agents over-fit the decomposition to the specific solution they just produced.** They will hand you tasks shaped like "extract the `parseFooBarResponse` helper I happened to write" rather than the general, durable seams the feature actually has. Massage the task list back into the right general shape — the boundaries that would exist regardless of how this particular owl got drawn. This is where your architectural judgment earns its keep; it is the part the agent cannot reliably do, because it only has its own first attempt to reason from. Good seams are usually: data model / schema changes, then the layer that consumes them, then the UI/API surface, then wiring and tests — each landing as a change small enough to review on its own and ideally mergeable independently. Throw away the owl's code at this point if it is garbage. Its job was to teach you the decomposition; the pieces get built fresh. ### 4. Dispatch the pieces, recursively Kick off new agents on the incremental tasks, parallelized as far as the dependency graph allows. Each piece is itself subject to the same rule: if a sub-task's diff blows past the budget, decompose *it* too. The loop is recursive — you keep splitting until every landing change is reviewable. For running several agents at once, this is exactly the [`tmux-pm`](../tmux-pm/SKILL.md) pattern: one PM session dispatching bounded workers in isolated worktrees, each on one atomic task, reporting back for review and merge. For handing a single decomposed task to a fresh agent with clean context, use the [`handoff`](../handoff/SKILL.md) skill to write the task prompt. Frontier models at high/xhigh effort run slowly enough that you can keep several pieces in flight while actively reviewing others or doing your own work — the latency is a feature, not a cost, because it matches the cadence of human review. ### 5. Re-draw the owl Periodically re-run the "draw the owl" prompt on what remains. As the decomposed pieces land, the remaining feature shrinks; at some point a fresh whole-feature attempt comes back *under* the review-ability threshold and you are done — the last owl is just mergeable. This is the convergence condition: keep drawing owls and carving until one fits. One floor case: some features have an irreducible core that is itself over budget — a single dense state machine, a protocol codec — where no seam splits it smaller. When the smallest honest seam still exceeds the threshold, stop recursing. Shrink the per-pass budget instead and review that core slowly and deliberately, ideally pairing on it; decomposition has done all it can and the remaining cost is real review attention, not more splitting. ## Keep the human in the loop This pattern is deliberately human-in-the-loop, and feature work is exactly where that matters most. Features touch human boundaries — UI, API shape, naming, product behavior — that no test fully pins down, and net-new code can introduce architectural pathologies that violate invariants you never wrote down. The review threshold exists so a human actually sees those boundary decisions before they calcify. Encode the invariants you *can* into specs and tests so future passes catch them mechanically, but assume the spec is incomplete and review the seams yourself. Continuous agents-driving-agents loops have their place, but for daily get-it-done feature work, the reviewable-chunk loop above is the higher-yield pattern: every piece lands ready to merge as-is or with light human refinement. ## Checklist - [ ] First attempt was a loose "draw the owl" prompt, not an over-specified one. - [ ] Diff measured against a review-effort budget (~1500 lines, adjusted) — generated/lockfile/rename lines subtracted before comparing. - [ ] If over budget: decomposed by both the agent and you, then reconciled. - [ ] Agent-proposed tasks generalized away from the throwaway solution's shape. - [ ] Pieces dispatched (parallel where possible), each re-checked against the budget and split further if needed. - [ ] Owl re-drawn as pieces land, until the remainder is reviewable. - [ ] Human reviewed the human-boundary seams (UI/API/naming/invariants). ## See Also - [`tmux-pm`](../tmux-pm/SKILL.md) — orchestrate the parallel worker agents that build the decomposed pieces. - [`handoff`](../handoff/SKILL.md) — write the fresh-context task prompt for each decomposed piece handed to another agent.