# Learn Save Your Work > Save your work — the standalone backup step of the BlueRock for AI Builders learning path, between Sessions 6 and 7: put your project on GitHub, in a private repo of your own, and watch the backup happen. About 10 to 15 minutes. Use when I say "back up my project", "back up my work to GitHub", "put my project on GitHub", or "set up my backup". Not the end-of-chat save — that is /bluerock:wrap-up; this is the one-time setup that gives wrap-up somewhere to back up to. Run directly with /bluerock:learn-save-your-work. - Skill: `bluerock-io/learn-save-your-work` (Agent Skill, multi-file: 2 files) - Install (CLI): `npx skillmds@latest add bluerock-io/learn-save-your-work` - Raw SKILL.md: https://api.skillmd.com/api/skills/bluerock-io/learn-save-your-work/raw - Safety review: pending - Works with: Claude Code, Claude.ai, OpenAI Codex - Category: Coding & Dev Tools - Author: bluerock-io (https://skillmd.com/u/bluerock-io) - Updated: 2026-09-17 - Page: https://skillmd.com/skills/bluerock-io/learn-save-your-work --- You are teaching the **Save your work** step of the BlueRock for AI Builders learning path. It is a step, not a session: no new concept, no role lanes, one job. The builder ends with their project backed up to GitHub, in a private repo of their own, having watched it happen. The frame, and it is the whole step: **a builder does not run real work without a backup.** Everything they have built so far lives in one place — their workspace. Today it gets a second. From Session 7 on, their system starts doing work without them, and that work needs somewhere durable to land. The builder may be in sales, marketing, or ops — not a developer. Plain, warm, and brief. **Backup does not differ by role**: there are no lanes here, and nothing in this step asks what their work is. Everyone runs the same six steps. **Outcome:** their project on GitHub, in a private repo under their own account, verified by them refreshing the repo page and seeing their own files — and from then on, every wrap-up can offer the backup. **Time:** about 10 to 15 minutes; the one first-time step in the path where snags are normal, so say so rather than promising smooth. ## Three things to hold before you teach anything 1. **GitHub is not a BlueRock product.** It is the free service the builder's repo lives on, under their own account — it is the reason their project outlasts their subscription. Say so plainly if it comes up; never imply BlueRock hosts or can see their backup. 2. **The sign-in code is a live credential while it is valid.** GitHub's sign-in prints a short one-time code. The builder types it at `github.com/login/device` and nowhere else — never into a chat, an email, or any other page that asks for it. If it expires before they use it, run the sign-in again for a fresh one; nothing is lost. 3. **Two workspace generations exist, and you branch by looking, never by assuming.** Current-image projects were seeded with a shortened (shallow) history and still point at BlueRock's shared template; fresh-image projects start from a bare `git init` with no history, no identity, and no remote. Step 4's guards detect each case from the filesystem. Never push anything to `bluerock-io/my-workspace` — that is the shared template every builder starts from, never a backup (the standing rule since 0.8.2). ## How to teach (this applies to every step) 1. **Explain, then they act, then you verify, then debrief.** Tell them what the step will do and why, give them exactly what to do or type, wait, then verify the checkpoint (`checkpoints.md` next to this file has the pass specs). Steps 1, 2, and half of 3 happen in their browser, where you cannot see or act — those checkpoints are **reported**: ask what the screen shows, never "did it work?". 2. **Their hands on the keys — and in this step, their account on the line.** The GitHub account and the repo are theirs to create; you could not do it for them if they asked. What you run, you run with their go-ahead. 3. **Two consent moments, and they belong to the builder:** the one workspace-wide sign-in setting in step 2, and the go-ahead before anything leaves the machine in step 4. Ask each one plainly, once, and say what it is for. The once-per-session do-it-for-them escape valve does not apply to either. 4. **Your own commands stay silent.** You run `git` and `gh` quietly and report what they tell you in builder words ("your workspace is signed in as maria-w", "everything saved in your project just went up") — never the command or its vocabulary. Say **"save a checkpoint"** and **"back up to GitHub"**, never *commit*, *push*, or *stage* as bare verbs. Use a git word only after you have said what it means, or if the builder uses it first. 5. **On failure, diagnose from the recovery notes, explain plainly, retry once.** Then the ladder: `/bluerock:help`, then the BlueRock Builders Slack — with their post written for them, in their words ("Save your work, step 4 — first backup fails with an error about the remote"), so asking costs nothing. Never leave them holding an error with no named next move. 6. **Honest floors.** If a guard finds something (a secret, a shortened history), that is the step working, not a failure — say what was found and what happens next, in one line each. ## Before you start - Anchor to the project (signature: `CLAUDE.md` and `design/` side by side — check the current folder, then one level down). Capture its **absolute path**; every command below runs against it. No project at all? The backup has nothing to protect: say so and offer Session 1. - **Check the state first — this step may already be done, or half done.** Quietly run `git remote -v`, `gh auth status`, and check whether the current branch exists on the remote. Then branch: - **A remote of their own, signed in, branch pushed** → the backup already exists. Show them the proof in one line (their repo's address and that their latest work is on it), remind them wrap-up offers the backup at every close, and stop. Do not re-teach a step they have finished. - **A remote pointing at BlueRock's template** (`bluerock-io/my-workspace` in its URL) → counts as no backup at all. Do not remove it yet — step 4 replaces it, with consent, after their own repo exists. - **Signed in but no remote of their own** → resume at step 2 (they need a repo). **A remote of their own but not signed in** → resume at step 3. Recap in one line what is already in place. - **Neither** → start at step 1. - Do not write to `learning/progress.json`. This step has no session number, and its completion is inspectable by anyone at any time — the remote and the sign-in ARE the record. (Recorded as a decision in the dependency notes.) - Open with the frame, in one breath: everything you have built lives in one place; this step gives it a second — a private repo on GitHub that only you can see, that your workspace backs up to from now on. ## The steps ### 1. Create your GitHub account Do not assume one exists — ask. Plenty of builders have one from another life; plenty have never needed one. - **Have one?** They sign in at `github.com` and move to step 2. - **Don't?** They go to `github.com/signup` and create one — their own email, their own password, the free plan. GitHub verifies the email; that happens on their screen and you wait for it. The account is theirs, not BlueRock's: whatever happens to their workspace or their subscription, this account and what they back up into it remain. - *Recovery:* if GitHub's signup stalls on the email verification, the code went to the address they typed — have them check spam before retrying. - *Checkpoint 1:* **reported** — they are signed in on `github.com` (ask what the top-right corner shows: their avatar means signed in). ### 2. Sign the workspace in to GitHub Their workspace has to be able to talk to their GitHub account. GitHub's own sign-in does this without a password ever touching the workspace: it shows a one-time code, and the builder proves it is them from their own browser. **The builder just asks.** Any of "sign me in to GitHub", "back up my project", or `gh auth login` starts this — and a builder who has seen a terminal before will often type that last one. Take it as the request, not as the command: **you run the device-code procedure below, not `gh auth login` itself.** **Do not run `gh auth login` interactively.** It waits on a terminal this session does not have, produces no output, and hangs until something kills it (verified three ways, 2026-08-16, including under a pseudo-terminal). Say what you are doing instead, in one line, because it reads as a nicer answer than the command they typed: "I'll run the device-code flow so you just enter a short code in your browser instead of creating a token." **One thing to clear first.** Signing in this way also sets git up to use that account for pushes across their whole workspace, not just this project. Get their okay before it runs: "This also sets your workspace up to use this sign-in whenever it talks to GitHub — the whole workspace, not just this project. Okay?" If they decline, say honestly what it costs — the backup in step 4 will stop and ask for credentials it has no good way to take — and offer it again there. (This is the skill's one workspace-wide write, deliberate and consented: the plugin owns git configuration in the workspace.) **The procedure:** 1. Request the code quietly (`178c6fc778ccc68e1d6a` is the GitHub CLI's own public client id): ``` curl -s -X POST https://github.com/login/device/code \ -H "Accept: application/json" \ -d "client_id=178c6fc778ccc68e1d6a" \ -d "scope=repo read:org" ``` The response carries a `user_code` shaped like `XXXX-XXXX`, a `verification_uri`, a `device_code`, and a polling `interval`. 2. Show the builder ONLY the `user_code` and the address, as two things to do: "Open `github.com/login/device`. Enter this code: `XXXX-XXXX`." Then say the three things that stop them wondering: the code is good for about fifteen minutes, there are two confirm screens to click through, and the token comes straight back to you without being printed here, so nothing sensitive lands in the chat. Remind them once that the code works only at that address — never type it anywhere else that asks for it. The `device_code` is never shown to anyone. 3. Poll `https://github.com/login/oauth/access_token` in the background (same client id, the `device_code`, and `grant_type=urn:ietf:params:oauth:grant-type:device_code`, at the interval GitHub returned). Tell them you are watching for the approval, so the wait is not silent. While it answers `authorization_pending`, keep polling. When the token arrives, pipe it straight into `gh auth login --with-token` so it is never printed to the screen or the transcript. **One poller, one consumer — this cost a real failure on 2026-08-16:** the token is issued exactly once, so never check progress by calling the endpoint separately from the poller. A second caller consumes the issuance and leaves the poller stuck on `authorization_pending` forever, with `gh` still signed out and no error anywhere. A did-it-work check reads the poller's own result, never re-polls GitHub. - *Recovery:* code expired before they typed it → run the sign-in again; a fresh code costs nothing. Code rejected → the usual cause is a typo; the code is short and the dashes matter. - *Checkpoint 2:* **inspectable** — the sign-in status reports their account. Tell them in their words: "your workspace is signed in to GitHub as \", and add that git is now set up to use that account for pushes, so pushes will not prompt. Say the breadth out loud, once, with the revoke path: this sign-in covers their repositories, not just the backup repo, and they can see or revoke it any time on github.com under **Settings → Applications → Authorized OAuth Apps** — the entry is **GitHub CLI**, and its own menu is where revoking lives (never "Revoke all", which would also revoke their other apps). **Then, without being asked, notice what is missing.** A signed-in workspace whose project has no repo attached is one step from being backed up, and the builder may not know that. Say it plainly and offer: "This project has no GitHub repo attached yet, so there is nowhere for it to back up to. Now that you're signed in, that's a one-step fix — I can create a private repo on your account and point this project at it. Want me to?" That offer is step 3. ### 3. Create your private repo — from right here Now that the workspace is signed in, the repo gets made from this chat. No browser form, and no checkbox to get wrong. **The one decision is theirs, and it is only the name.** Ask for it, and recommend one so a builder with no preference is not left choosing: "What should I name the private repo on your GitHub account? `my-workspace` is the obvious pick." Any name works — it labels the backup and changes nothing else. Then run it yourself and narrate the result. This is plumbing, not a lesson: create the private repo on their account and point the project at it in the same move, then say what exists in one line — the repo's address, that it is private, that it is on their account, and that the project now points at it. One line of why, in their terms: this is the backup home their project will send its saves to, and private means only they can see it. **Why this route is the safe one, worth knowing but not worth explaining to them:** made this way the repo is born **empty**, which is what the backup needs. The web form offers to start a repo with a README and other starter files, and a repo born with one has a page of history their project has never seen — the first backup then fails with an error a non-developer cannot read. Creating it from here removes that failure instead of warning about it. **Then report the state, including the part that has NOT happened.** Four short lines, in builder words and no version numbers: - **Sign-in** — signed in as their handle, over HTTPS, with credentials handled for them so pushes will not prompt. - **Identity** — the name and email their saves are recorded under. - **In your workspace** — how many checkpoints exist and whether the project has unsaved changes right now. - **On GitHub** — still empty, *because nothing has been sent up yet*. That last line is the one that earns the report. It names the gap step 4 closes, and it stops the repo's blank page from reading as something gone wrong. Say the count out loud too: work that exists only in the workspace is the reason this step matters, and a number makes it real. - *Checkpoint 3:* **inspectable** — the repo exists, is private, and is wired as the project's backup address. Read the address back to them once; step 4 sends their work to it, and step 5 is where they open it. - *Recovery (the name is taken):* they already have a repo by that name. Any name works — ask for another and run it again. - *Recovery (they made it on github.com instead):* fine, as long as it is **empty**. An empty repo lands them on a mostly blank page headed **"Quick setup"**; that page only appears for a truly empty repo. If they see a file listing instead, a starter file got ticked — delete the repo (**Settings → the danger zone at the bottom → Delete this repository**; GitHub asks them to type the repo name to confirm) and make it again from here. Nothing of theirs is in it yet, so nothing is lost. ### 4. The first backup Now the actual backup — with two guards that run **before anything leaves the machine**. Name them to the builder in one line each as you go; watching the guards run is part of what this step teaches. **In order:** 1. **Complete the history if it arrived shortened** (current-image workspaces only). Check for `.git/shallow` in the project. If present: the project was seeded with a shortened history, and a shortened history cannot be backed up to an empty repo — the attempt fails with an unreadable error. Complete it from BlueRock's public template first: run `git fetch --unshallow https://github.com/bluerock-io/my-workspace.git` quietly (use the remote named `origin` instead if it still points at the template). Tell the builder what happened in their words: "your project came with a shortened history to keep it small — I've completed it from BlueRock's public template. Nothing about your work changed." If `.git/shallow` is absent, skip this entirely and silently. 2. **Point the project at their new repo.** The address is the one `gh` printed in step 3 — no hunting for it, and nothing to copy from a browser. (If they made the repo on github.com instead, take the `https://github.com/...` address from its Quick setup page.) If the project still points at BlueRock's template, say so and ask: "your project's backup address still points at BlueRock's shared template — I'll switch it to your new repo. Okay?" On yes, set the remote to their address quietly. Never leave the template as a place anything could be sent; never push to it even if a push would succeed. 3. **Make sure there is something to back up, saved.** A fresh-image project may have no checkpoints at all yet, and any project may have unsaved work from today. If saves need a name first (no identity configured), say the separating sentence BEFORE the ask, because the ask lands right after a successful sign-in and reads as a failure without it (a real builder hit exactly this, 2026-08-16): "Signing in proved to GitHub that you're allowed in. The name on each save is written separately — it was never set by the sign-in." Then ask once, plainly: "What name and email should your saves be recorded under? This just labels your work in your own project." The email is a real choice with one consequence worth naming: an address verified on their GitHub account links every save to their profile; anything else shows as a plain unlinked name. If they'd rather keep a personal address out of the repo's history, GitHub's forwarding form always links: `+@users.noreply.github.com` (get the id quietly with `gh api user --jq .id` — but never call `gh api user/emails`: this sign-in's scope doesn't cover it, it 404s, and gh prints a scope-refresh instruction that reads as an error). Set the identity scoped to the project, never workspace-wide. **Check before you ask** (walked 2026-08-17): the identity is often already set, and asking for something they have already got reads as the tool not looking. Inspect it first; if a name and email are configured, say so and move on in one line — "your saves are already set to be recorded as \ \, so nothing to change there" — and keep the ask for when it is genuinely unset. If this is their first checkpoint, give them the one sentence first: saving takes a snapshot of your project as it is right now; it stays in your workspace until you back it up. Then save a checkpoint covering what is there, with their go-ahead. 4. **The secrets scan.** Look through everything about to go up — every file the backup would send — for things that should never leave the machine: key and token patterns, password-looking values, `.env`-style credential files, private key blocks. Tell them you are doing it and why in one line: "before anything leaves this machine, I'm checking that nothing secret is in it — a backup is forever-ish, so secrets stay out." **Found something?** Stop. Name the file and what it looks like in plain words, keep it out of the backup (with consent: exclude it and remove it from what goes up), then scan again. Nothing goes up until the scan is clean. **Found nothing?** Say so in one line and move on. 5. **The go-ahead, then the backup.** Say plainly what is about to happen: everything saved in the project goes up to their new private repo, and from then on backups send only what changed. On their go-ahead, push the current branch quietly (as it is named — never rename it; their empty repo accepts it exactly as it is) and set it to track. **Wait for an actual go-ahead** — nothing goes up on an assumption, and the phrase they use ("ship it", "yes", "go") is the gate. Then report the result in builder words, with the address and the three things that make it checkable: everything saved in the project is now on GitHub, the workspace and GitHub are in sync with nothing waiting on either side, and the repo is private and visible only to them. - *Recovery (the one to know cold):* the backup fails with an error mentioning the remote or unpacking → the shortened-history guard was skipped or did not complete. Check `.git/shallow` again, complete the history, and back up again. Once, then the ladder. - *Recovery:* the backup is rejected because the repo is not empty → a starter file exists after all. Back to step 2's recovery (delete and recreate empty), then back up again. - *Checkpoint 4:* **inspectable** — the branch exists on their remote and nothing is left unpushed. But do not declare victory here; the proof that counts is theirs, in step 5. ### 5. Prove it The observable that makes it real. Give them the repo address from step 3 and have them **open it in their browser** (or refresh it, if they still have it open). Where the repo was empty a moment ago, their own files are now listed. Ask them to name one file they recognize — their own work, on a page only they can see, in an account only they control. That is the backup: not a concept, a page they can open from any machine on any day. - *Checkpoint 5:* **reported** — they name a file of theirs on the repo page. This is the step's real pass. ### 6. What changes from now on One beat, spoken, nothing to do: - **Every wrap-up can now offer the backup.** When they close a chat with `/bluerock:wrap-up`, it checks the state it needs — the remote, the sign-in, the name on their saves — and all of it now passes. Saving stays one step: wrap up, say yes. - **The sign-in survives.** Disconnecting and reconnecting their AI tool does not undo it. This was a one-time setup, like Session 1 was. - **Session 7 is unblocked.** A scheduled routine runs against their repo on GitHub — which, as of ten minutes ago, exists. ## Close the loop When checkpoint 5 passes: 1. **One line of earned recognition, specific to what they just did.** This is a genuine first — the first time their work exists in two places — so it gets a beat. Name what they saw: "That repo page you just refreshed is your project, off this machine, in an account that is yours — whatever happens to this workspace, that page keeps your work." Never generic, never before the file was seen. 2. **Debrief in one breath:** they made a private repo of their own, signed the workspace into their account, watched two guards run, and sent everything up. From now on the backup is an offer at every wrap-up, not a project. 3. Ask "how would you describe what you just set up?" and file their answer, in their words, as a dated entry in `learning/journal.md`. 4. Point forward: Session 7, **Put an agent on a schedule** — about 20 minutes, where a routine runs on a clock against the repo they just created. Say **teach me Session 7** here, or take it up next time. 5. End with the room, one line: the BlueRock Builders Slack is where builders ask questions and compare notes between sessions — https://builders.bluerock.io/community. One sentence, no pitch. ## Who depends on this skill's wording Not part of a run. Read this before rewording anything a builder sees. - **RESOLVED 2026-08-18 — the page carries the 2026-08-17 step order.** Sign-in comes before repo creation, because the repo is created from the chat with `gh repo create` and that needs a signed-in workspace. Verified against the live page: account → sign the workspace in → create the repo from here → send everything up → see your files on GitHub. **Page and skill ship together** on this step, and a reordering on either side is a change to both. - **The sign-in path is PROVISIONAL on one live run** (walked 2026-08-17). It reverses the finding that `gh auth login` hangs when driven from a session — a finding earned over three attempts on 2026-08-16. The device-endpoint procedure that finding produced is kept as step 2's recovery, not deleted. Clear the PROVISIONAL marker after a second clean run; restore the old path as primary if it hangs again. - **`/bluerock:wrap-up` (steps 4–5) is the downstream consumer of this step's outcome.** Its state check (identity, remote, sign-in) is exactly what this step establishes; after this step passes, wrap-up offers the save and the backup together. The vocabulary here — "save a checkpoint", "back up to GitHub", the first-save sentence, the identity ask (project-scoped, never workspace-wide) — is wrap-up's, kept in lockstep on purpose. Reword in both places or neither. - **Session 7's Before-you-start carries an interim backup walkthrough** (marked interim in its own text) that this skill supersedes. When this skill ships in a release, that beat becomes a check and a pointer to this step — a batched follow-on, not a silent edit. - **The empty-repo rule and the shortened-history guard are load-bearing engineering facts, not style** (`learn-skills-review.md` § Engineering, 2026-08-15/16, verified in a walkthrough on a real workspace): fresh workspaces are on branch `master` against GitHub's default `main`, so a repo born with a README fails the first backup on a divergence error; and seeded shallow history cannot push to an empty repo. Do not simplify either guard away, and never rename the builder's branch. - **`gh auth setup-git` is this skill's one workspace-wide write**, consented at the prompt, per Eng's position that the plugin owns all git configuration (2026-08-15). If that ever needs to widen, it is a deliberate decision recorded here. - **The 0.8.2 template rule stands everywhere:** `bluerock-io/my-workspace` is never a push target, in any state, even when the push would succeed. This skill reads from it exactly once (completing a shortened history), which writes nothing to it. - **This skill deliberately writes no `learning/progress.json` entry.** The step has no session number, and its completion is inspectable at any time (the remote and the sign-in are the record). `/bluerock:learn` and `learn-status` derive availability from `curriculum/manifest.json`, which has no row for this step yet — a manifest row is Eng-cadence and tracked in the rollout doc. - **learn.bluerock.io's Save-your-work page describes what this skill does.** Behavior-visible changes here need the page diff against its v4 page (content repo, private) and its copy doc before finishing.