# Playwright Selectors

> Best practices for writing…

- Skill: `codyswanngt/playwright-selectors-3` (Agent Skill, multi-file: 2 files)
- Install (CLI): `npx get-skill add codyswanngt/playwright-selectors-3`
- Raw SKILL.md: https://api.skillmd.com/api/skills/codyswanngt/playwright-selectors-3/raw
- Safety review: pending (external: skill-scanner PASS, skillspector PASS)
- Works with: Claude Code, Claude.ai, OpenAI Codex
- Category: Coding & Dev Tools
- Author: codyswanngt (https://skillmd.com/u/codyswanngt)
- Updated: 2026-09-21
- Page: https://skillmd.com/skills/codyswanngt/playwright-selectors-3

---


# Playwright E2E Testing for Expo + GlueStack UI

## The #1 Rule: Browser First, Code Second

Before writing ANY Playwright test, open the target page in a browser and manually walk through the flow. Never write tests blind from code reading alone.

Expo/GlueStack apps have complex rendering pipelines — what you see in source code is not always what renders in the DOM. Components may have state-dependent behavior (a button that opens an actionsheet OR a confirm dialog depending on data), elements may live on different tabs than you expect, and testIDs may or may not forward to the web DOM depending on the component type.

### Workflow for each new test

1. **Navigate** to the page using Playwright MCP browser tools
2. **Click through** the exact user flow the test will cover
3. **Run** `document.querySelectorAll('[data-testid]')` to see which testIDs are actually in the DOM
4. **Note** any conditional UI states, loading sequences, and tab navigation required
5. **Then** write the test code matching exactly what you observed

### Verify testIDs before scaling

Before writing a batch of tests that depend on testIDs, verify ONE testID end-to-end:

```javascript
// Run this in the browser console or via Playwright MCP evaluate
document.querySelectorAll('[data-testid]').length
// Should return > 0 after page fully loads
```

Accessibility snapshots from Playwright MCP may NOT show `data-testid` attributes. Always use `document.querySelectorAll` for ground truth. Pages may show very few testIDs before full render (e.g., 3 elements on initial load vs 80+ after data loads) — wait for the page to settle before checking.

---

## Selector Strategy

### Priority order

1. **`getByTestId`** — most stable, survives copy changes and redesigns
2. **`getByRole`** — good for interactive elements (`button`, `tab`, `switch`, `heading`)
3. **`getByLabel`** — form elements with labels
4. **`getByPlaceholder`** — inputs with placeholder text
5. **`getByText`** — fragile, use only when no testID or role is available

The generic web testing advice to prefer `getByRole` over `getByTestId` doesn't fully apply to React Native Web apps because ARIA role mapping is inconsistent across GlueStack components. testIDs are more reliable when properly set up.

```typescript
// 1. Preferred — testID
await expect(page.getByTestId("settings:dark-mode-toggle")).toBeVisible();

// 2. Good — role + accessible name
await page.getByRole("button", { name: "Close dialog" }).click();

// 3. Good — placeholder
await page.getByPlaceholder("Search players...").fill("Messi");

// 4. Fallback — text (fragile)
await expect(page.getByText("Settings").first()).toBeVisible();
```

### Fallback pattern for migration periods

When adding testIDs to components that are deployed separately from tests, use `.or()` to fall back gracefully:

```typescript
// Works before AND after testID is deployed
const heading = page
  .getByTestId("feature:heading")
  .or(page.getByText("Feature Title").first());
await expect(heading.first()).toBeVisible();
```

Remove the `.or()` fallback once the testID is confirmed deployed and working.

---

## testID Naming Convention

Use a namespaced pattern with colons as separators: `screen:element`

### Format

```
{screen}:{element}
```

- **screen**: lowercase screen/feature name (e.g., `home`, `profile`, `settings`)
- **element**: lowercase element identifier (e.g., `container`, `title`, `submit-button`)

### Examples

| testID                      | Description                    |
| --------------------------- | ------------------------------ |
| `home:container`            | Main container on home screen  |
| `home:title`                | Title text on home screen      |
| `profile:avatar`            | User avatar on profile screen  |
| `settings:dark-mode-toggle` | Dark mode toggle in settings   |
| `auth:login-button`         | Login button on auth screen    |

### Rules

1. Use lowercase only
2. Use colons (`:`) to separate screen from element
3. Use hyphens (`-`) for multi-word elements
4. Be descriptive but concise
5. Avoid redundant words (e.g., `home:home-title` should be `home:title`)

---

## testID Forwarding: Which Components Support What

This is the most critical technical knowledge for this stack. GlueStack UI components have **different** testID behavior depending on their render pipeline.

### The render chain

React Native Web converts `testID` → `data-testid` through its `createDOMProps` function. But this only happens for components that go through RN Web's `createElement` path. GlueStack wraps many components with NativeWind utilities (`withStyleContext`, `tva`) that bypass this path.

### Rules by component type

| Component | testID approach | Why |
|-----------|----------------|-----|
| `Pressable` (GlueStack) | `testID={value}` | Wraps RN `Pressable` → `View` → `createDOMProps` ✅ |
| `View` (react-native) | `testID={value}` | Goes through `createDOMProps` ✅ |
| `Text` (react-native) | `testID={value}` | Goes through `createDOMProps` ✅ |
| `Text` (GlueStack `@/components/ui/text`) | `{...{"data-testid": value}}` | NativeWind wrapper renders `<span>`, bypasses `createDOMProps` |
| `HStack` / `VStack` / `Box` (GlueStack) | `{...{"data-testid": value}}` | Same — NativeWind wrapper bypasses pipeline |
| `Heading` (GlueStack) | `data-testid={value}` | Renders raw `<h1>`–`<h6>` HTML elements |
| `Button` (GlueStack) | Unreliable — verify first | May or may not forward depending on version |
| Third-party (e.g., BouncyCheckbox) | Usually not possible | Use text/role selectors instead |

### How to tell which path a component uses

Trace the component's render chain:

```
GlueStack Pressable → createPressable({ Root: withStyleContext(RNPressable) })
  → withStyleContext passes {...props} to RNPressable
  → RN Web Pressable renders <View {...rest}>
  → View goes through createElement → createDOMProps
  → createDOMProps converts testID → data-testid ✅
```

vs:

```
GlueStack Text → tva-styled component
  → Renders <span> or <p> directly
  → Never hits createDOMProps
  → testID prop is silently ignored ❌
```

### Adding a testID to a new component

1. Check the component type against the table above
2. If it's a `Pressable` or RN `View`/`Text`, use `testID={value}` directly
3. If it's GlueStack `Text`, `HStack`, `VStack`, `Box`, use `{...{"data-testid": value}}`
4. If it's GlueStack `Heading`, use `data-testid={value}` as a JSX attribute
5. **Build and verify** in the browser before writing tests against it

```tsx
// Pressable — testID prop works
<Pressable testID="feature:action-button" onPress={handlePress}>
  <Text>Click me</Text>
</Pressable>

// GlueStack Text — use data-testid spread
<Text {...{"data-testid": "feature:section-heading"}}>
  Section Title
</Text>

// GlueStack HStack — use data-testid spread
<HStack {...{"data-testid": "feature:row"}} className="items-center">
  <Icon as={Star} />
  <Text>Rating</Text>
</HStack>

// GlueStack Heading — use data-testid attribute
<Heading data-testid="feature:page-title" size="lg">
  Page Title
</Heading>
```

---

## When to Add testID

### Add testID To

1. **Interactive elements** that E2E tests will click/interact with
2. **Key structural containers** for page load verification
3. **Dynamic content areas** that change based on state
4. **Form elements** that lack semantic labels

### Do Not Add testID To

1. Every element (over-testing creates maintenance burden)
2. Elements with good semantic selectors (use getByRole instead)
3. Decorative elements not needed for testing
4. Elements inside third-party components (may not propagate)

---

## Accessibility Best Practices

Prefer semantic selectors and aria-labels over testID when possible. This benefits both testing and screen reader users.

### aria-label for Testing and Accessibility

```typescript
// Correct — benefits both testing and accessibility
<Pressable
  accessibilityLabel="Close dialog"
  onPress={handleClose}
>
  <XIcon />
</Pressable>

// E2E test uses accessible name
await page.getByRole("button", { name: "Close dialog" }).click();
```

### accessibilityRole for Semantic Elements

```typescript
// Correct — semantic role for assistive technology
<Box accessibilityRole="banner" testID="header:container">
  <Text accessibilityRole="heading">Welcome</Text>
</Box>

// E2E test can use role
await expect(page.getByRole("banner")).toBeVisible();
await expect(page.getByRole("heading", { name: "Welcome" })).toBeVisible();
```

---

## CI Architecture: Test the PR's Own Code

Playwright must test against the code in the PR, not a remote deployed environment. If CI tests against a deployed app, new testIDs and component changes are invisible until deployed — creating a frustrating push-wait-fail cycle.

### Expo web setup for CI

The CI pipeline should:
1. Build the web app: `npx expo export --platform web` (creates `dist/`)
2. Serve it locally: `npx serve dist -l 8081 -s`
3. Run Playwright against `http://localhost:8081/`

### playwright.config.ts

```typescript
import { defineConfig } from "@playwright/test";

export default defineConfig({
  // In CI, serve the static web build locally
  ...(process.env.CI
    ? {
        webServer: {
          command: "npx serve dist -l 8081 -s",
          port: 8081,
          reuseExistingServer: false,
        },
      }
    : {}),

  use: {
    baseURL: process.env.CI
      ? "http://localhost:8081/"
      : "https://dev.example.com/",
  },
});
```

> **Run local verification with `CI=1`.** In a config shaped like the one above,
> `webServer` exists only when `CI` is set and `baseURL` otherwise points at the
> **deployed** environment. So a plain `npx playwright test <spec>` does not test your
> working tree at all — it tests whatever is deployed. A pass proves nothing about your
> change, and a failure may be the deployed app failing rather than your code. Use
> `CI=1 npx playwright test <spec>` whenever you are verifying uncommitted work.
>
> **Use a control spec before concluding anything from a red run.** If a spec fails
> locally, re-run a **known-good sibling spec, unmodified, in the same mode**. If the
> control fails too, that surface is not exercisable in your environment and the run
> says nothing about your spec — don't "fix" a spec that was never broken. If the
> control passes, the defect is genuinely yours.
>
> Also read reporter totals carefully: `setup` / auth projects count as passing tests.
> "2 passed" can mean two auth setups and zero assertions.

---

## Writing Robust Tests

### Data independence

Never assert on data-dependent elements as required. The CI test user may have different data than your local environment.

```typescript
// BAD — fails if test user has no data
const tableRows = page.locator("table tr");
await expect(tableRows.first()).toBeVisible();
expect(await tableRows.count()).toBeGreaterThan(1);

// GOOD — handles empty state gracefully
const tableRows = page.locator("table tbody tr");
const rowCount = await tableRows.count();
if (rowCount === 0) {
  await expect(page.getByPlaceholder("Search...")).toBeVisible();
  return;
}
await tableRows.first().click();
```

### Timeouts

Use environment-aware timeouts from a shared constants file. CI runners are slower than local machines.

```typescript
export const TIMEOUT = {
  test: isCI ? 90_000 : 60_000,
  expect: isCI ? 30_000 : 15_000,
  navigation: isCI ? 45_000 : 30_000,
};

// In tests — never hardcode
await expect(element).toBeVisible({ timeout: TIMEOUT.navigation });
```

### Serial vs parallel mode

Use serial mode for tests that mutate shared backend state. Read-only tests can run in parallel.

```typescript
test.describe("Feature with mutations", () => {
  test.describe.configure({ mode: "serial" });
});
```

### State-dependent UI

Some UI elements behave differently depending on application state. Discover this during the browser-first step, then handle both cases:

```typescript
const addButton = page.getByTestId("feature:add-button").first();
await expect(addButton).toBeVisible();

const modal = page.getByText("Add to List");
const isModalVisible = await modal.isVisible();

if (isModalVisible) {
  await page.getByText("Done").click();
} else {
  await expect(addButton).toBeVisible();
}
```

---

## Common Pitfalls

### SonarCloud security hotspots

These patterns trigger SonarCloud security hotspot warnings that block PR merges:

```typescript
// BAD — triggers security hotspot
page.on("dialog", dialog => dialog.dismiss());
const result = await element.waitFor().catch(() => false);

// GOOD — use explicit checks instead
const isVisible = await element.isVisible();
const count = await elements.count();
```

### Page not fully rendered

Always wait for a content-dependent element before asserting on testIDs:

```typescript
// BAD — may run before page renders
const count = await page.evaluate(() =>
  document.querySelectorAll('[data-testid]').length
);

// GOOD — wait for known element first
await page.waitForLoadState("domcontentloaded");
const item = page.getByTestId("feature:item").first();
await item.waitFor({ state: "visible", timeout: 15000 });
```

### Third-party component testIDs

Components from third-party libraries (e.g., `react-native-bouncy-checkbox`, `react-native-gifted-chat`) generally do NOT forward `testID` to the web DOM. Use text, role, or structural selectors for these.

---

## Implementation Checklist

When adding E2E test coverage to a component:

- [ ] Open the page in a browser and walk through the flow first
- [ ] Run `document.querySelectorAll('[data-testid]')` to see existing testIDs
- [ ] Identify elements that need selectors for testing
- [ ] Check component type against the forwarding rules table
- [ ] Use namespaced testID pattern (`screen:element`) for elements without semantics
- [ ] Add accessibility labels where beneficial
- [ ] Verify testID propagates to `data-testid` on web before writing tests
- [ ] Use environment-aware timeouts, not hardcoded values
- [ ] Handle empty data states gracefully
- [ ] Document testIDs in component JSDoc preamble

## Example Component

```typescript
/**
 * Profile screen component.
 *
 * Test IDs for E2E testing:
 * - `profile:container` - Main container
 * - `profile:avatar` - User avatar image
 *
 * @module features/profile/screens/Main
 */
export const ProfileScreen = () => (
  <Box testID="profile:container" className="flex-1 p-4">
    <Image
      testID="profile:avatar"
      source={{ uri: user.avatarUrl }}
      accessibilityLabel={`${user.name}'s profile photo`}
    />
    <Text accessibilityRole="heading">
      {user.name}
    </Text>
    <Pressable
      accessibilityLabel="Edit profile"
      onPress={handleEdit}
    >
      <Text>Edit</Text>
    </Pressable>
  </Box>
);
```

## Corresponding E2E Test

```typescript
test.describe("Profile Screen", () => {
  test.use({ viewport: VIEWPORT.desktop });

  test.beforeEach(async ({ auth }) => {
    await auth.login();
  });

  test("displays user information", async ({ page }) => {
    await page.goto("/profile");
    await page.waitForLoadState("domcontentloaded");

    // Verify structural container
    await expect(page.getByTestId("profile:container")).toBeVisible();

    // Prefer accessible queries when available
    await expect(page.getByRole("heading")).toHaveText("John Doe");
    await expect(
      page.getByRole("button", { name: "Edit profile" })
    ).toBeVisible();

    // Use testID for elements without semantic roles
    await expect(page.getByTestId("profile:avatar")).toBeVisible();
  });
});
```

