# Call Recap > Turns a recorded customer call into an honest read of it plus the full set of emails it generated - the recap and every follow-up - grouped by recipient, written in the user's voice and staged as drafts. Trigger whenever the user shares a call recording link from any meeting recorder, pastes a transcript, or points at a call, and asks what they should send, or says "recap email", "meeting recap", "write the follow-ups", "what do you think of this call", "emails from this call", "post-call emails", "who do I need to email after this", or names a customer and a call in the same breath. Also trigger when they forward a meeting summary and ask for anything written off the back of it. Recorder-agnostic: a pasted transcript alone still produces the full email set, and it names what it could not check rather than guessing. Prefer this skill over drafting emails directly - a call almost always generates more than one email, and the ones the user forgets are the expensive ones. - Skill: `cspulse/call-recap` (Agent Skill, multi-file: 5 files) - Install (CLI): `npx skillmds@latest add cspulse/call-recap` - Raw SKILL.md: https://api.skillmd.com/api/skills/cspulse/call-recap/raw - Safety review: pending - Works with: Claude Code, Claude.ai, OpenAI Codex - Category: Productivity - Author: CSPulse (https://skillmd.com/u/cspulse) - Updated: 2026-09-17 - Page: https://skillmd.com/skills/cspulse/call-recap --- # Call Recap A recorded call is not one email. It is a set of them, sitting with different people, blocked on each other in a specific order. This skill turns a recording into that whole set, plus the read on the call that makes the emails worth sending. The failure mode this exists to prevent: writing a tidy recap to the coordinator, feeling done, and leaving the three emails that actually move the account unwritten. --- ## What this needs **Minimum: a transcript.** Pasted, uploaded, or pointed at. Everything below still runs, and the output arrives in chat. **Better with** a connected meeting recorder, which fetches the transcript itself; a connected mailbox, which finds real addresses and the threads to reply into; and somewhere to write files, which keeps the drafts document next to the account. **Best with** a workspace holding account notes and a voice guide. That is what turns a competent recap into one the user sends without rewriting it. Nothing here is required. Each missing piece costs one specific capability, and the skill says which one out loud rather than guessing around it. --- ## Step 0: Orient Check what context exists before touching the recording. None of it is a prerequisite. 1. House rules, if the workspace keeps them - a `CLAUDE.md` or equivalent covering workflow and editorial conventions 2. A voice or style guide - how the user writes. Where one exists it is non-negotiable, and it is the difference between a draft they send and a draft they rewrite. 3. Filing conventions, if the output is going to be written to a file State what you found and what you did not, in one line. Where there is no voice guide, infer the voice from the user's own sent emails if you can reach them; otherwise write plainly and say the voice is unguided. Never stop because a file is missing. --- ## Step 1: Get the full transcript, not the summary Resolve the recording and pull **the complete transcript**. The AI summary is a starting index, not the source. This matters more than it sounds. A summary will tell you a customer raised "filtering for quality" as a challenge. The transcript tells you how they described the problem in their own words, which is the sentence that decides how you open the demo and what you promise in writing. Summaries drop the specifics and keep the categories, and the specifics are the whole value. Pull the summary too, as a cross-check for anything the transcript makes you unsure of. See `references/getting-the-transcript.md` for the order to try, what to do with a link you do not recognise, and exactly what to ask for when nothing resolves. --- ## Step 2: Load the account Only if there is account context to load. Where there is none, say so in one line and carry on - the transcript alone still supports a good recap, it just cannot tell you what was promised in June. Where it exists, find the account folder and read: - The account plan, for stakeholders, roles, contract state, open risks - Any prior drafts file for the same account, so you inherit the running list of open items rather than rediscovering it - A prep sheet, if `call-prep` was run before this call. It carries the outcome the call was supposed to produce, which is the fastest way to judge whether it did - Whatever else in the folder looks relevant to what the call covered You are looking for the things a transcript cannot tell you: who has authority, what has been promised before, what is already late, what the commercial picture is. --- ## Step 3: Find the humans and the threads Two lookups, both cheap, both high-leverage, and both needing a connected mailbox. Without one, ask the user for the addresses and for whether each email is a reply or new, then carry on. A guessed address is worse than an asked question. **Email addresses.** Search the mailbox for the domain. Never guess an address. If someone on the call has no address you can find, say so and ask rather than inventing one. **Existing threads.** Search for the subjects the call touched. Most follow-ups belong in a thread that already exists, and replying into it gives the recipient the history for free. In practice most calls produce a majority of replies rather than new threads. Starting a fresh thread orphans whatever was already open in the old one, and the recipient loses the history that made the ask make sense. Note for each planned email whether it is a reply or new, and to which thread. --- ## Step 4: Read the call before writing anything Give the user your actual read. Not a summary, which they can get from the recorder, but a judgement. What to look for: - **What genuinely moved.** Which blockers cleared, which commitments were made, by whom. - **What is at risk.** Especially commitments made on the call that depend on work that has not started. A demo date agreed in front of a new stakeholder, resting on a dev team nobody has a line to, is the most dangerous thing that can happen on a friendly call. - **What was missed.** The opening that went past. This is usually the most useful part and the part most easily skipped. It is often a statistic or a worry the customer volunteers in passing, which nobody connects to a number the account already has sitting in front of it. - **The single sharpest line in the call.** Usually a customer sentence stating their real constraint in their own words. Quote it. It should shape at least one email. - **Whether a block was real.** Items parked as "needs approval" that a senior person waves through in twenty seconds were never approvals. They were routing failures. Name that, because it changes who to go to next time. Be honest about weak calls. A call where the customer was warm and nothing moved is a weak call, and saying so is more useful than praising the rapport. Rapport that produces a licence conversation is worth the airtime; rapport instead of the adoption conversation is not. Keep this to a few short paragraphs. The user reads it in under a minute. --- ## Step 5: Ground every claim before it reaches a draft A recap is the customer's record of what was agreed. An invented next step does not stay invented, it becomes a real expectation you now owe. A confident "as discussed, we sent the July highlights" when nobody sent them is worse than saying nothing, because it either exposes that you did not, or sends the customer looking for something that does not exist. So every factual claim in a draft traces to a source, and the source depends on the claim: - **What was said, agreed or asked on the call** comes from the transcript. If you cannot point at a line, it did not happen. - **What is already true about the account** - what was sent, when someone last replied, what was promised in July, what the contract says - comes from the mailbox, the account plan and the signed agreement. Not from the call. People compress and misremember out loud, and transcripts are lossy in exactly the places that matter. - **What the product does, collects or costs** comes from a human. You cannot verify this from any source you have, so it gets flagged rather than asserted. Things that go wrong often enough to name: - **Upgrading a maybe.** "Let us look at that" is not "we agreed to". "I'll try to" is not "I will". The transcript's hedge belongs in the email. - **Asserting a send you did not find.** Search before you write "as discussed" or "as promised". Two runs over the same call will happily disagree about whether an email went out, which tells you the model is guessing, not remembering. - **Inventing the tidy version.** Turning a specific, awkward discussion into a clean generic summary loses the thing the customer actually cares about. If shortening would cost a nuance that matters, keep the nuance and cut somewhere else. - **Hedging instead of flagging.** "I believe the highlights went out" reads as fact to someone skimming. If you do not know, flag it in the document and leave it out of the email. Where two sources disagree, the more recent written record beats the call, and say in the document that they disagreed rather than silently picking one. --- ## Step 6: Plan the email set, then check the split List every email the call generated. Work from commitments, not topics: every "I'll send you", "can you introduce me", "let's get time" is an email. **Group by recipient, not by task.** Several open items with the same person default to one consolidated email. The exception is an email meant to be forwarded - a security note the customer will pass to their CISO cannot carry an unrelated scheduling ask, because they cannot forward it without editing. **One ask per email.** If a second genuinely belongs, it gets one line, not a section. **Order them, with timing.** Some are blocked: an invite to a new stakeholder waits for the introduction. Some are time-critical because the customer is expecting them that morning. Put the order in the document. Then show the user the list as a short table - recipient, purpose, thread, timing - and ask how they want any genuinely ambiguous splits handled. Voice principles say to ask rather than assume, because sometimes a separate email is deliberate. Use `AskUserQuestion` and keep it to the calls that actually change the output. --- ## Step 7: Write the drafts into a working document **Drafts live in the document, not in chat.** Chat gets a pointer plus the decisions that need the user. This is a workspace rule and it also keeps drafts somewhere they can edit them. **Where it goes depends on what is available, the content does not.** Where files can be written, create `//YYYY-MM-DD--post-call-email-drafts.md`. Where they cannot, produce the identical document as one block in chat that the user can copy wherever they keep things. Same structure, same flags, same completeness - only the destination changes. Use `assets/drafts-document-template.md` for the structure and `references/email-craft.md` for the writing itself. Every draft carries: To, CC, Subject, whether it is a new email or a reply into a named thread, the body, and a one-line note on why it is shaped the way it is. **Flag before send.** Four kinds of flag, and they earn their place: - **Grounding gaps.** Anything from Step 5 you could not trace to a source. Name the claim and where it would have to be checked. - **Product and security claims.** Anything you asserted about how the product works, what it collects, what it costs. Say plainly that it is your understanding and name who should confirm it. A security note read by a customer's CISO dies on one wrong bullet, and the cost lands weeks later when it is unrecoverable. - **Ownership.** An email that is someone else's to send. If the CEO told the customer they would come back on commercials, a draft from the user proposing terms steps on that. Draft it anyway if it is useful, but say who should confirm. - **Missing data.** An address you could not find, a slot not yet agreed, a name you are unsure of. Never fill these in silently. Then read each draft once as the recipient, not as the writer. Does it show you listened? Is the ask obvious? Is it asking them to do work you could have done? That pass catches things a rules checklist does not. --- ## Step 8: Stage the drafts Only where a mail connector is available. Once the user has reviewed the document, create each email as a draft in their mail client, with replies going into the identified thread so the history stays intact. Without a mail connector, the document is the deliverable. Say so plainly rather than implying anything was staged, and make sure each draft carries its To, CC and Subject so copying it across is mechanical. Do not stage anything carrying an unresolved flag from Step 7. A flagged draft sitting in the outbox is one keystroke from reaching a customer with an unverified security claim in it. Stage the clean ones, tell them which ones you held and why. Never send. The user sends. --- ## Step 9: Hygiene pass A call changes more than the inbox. Where there is a workspace, close the loop in it. Where there is not, run exactly the same pass and return the findings as a short list at the end - they are worth knowing even when there is nowhere to file them. Close the loop on: - **New people.** Anyone on the call who is not in the account plan's stakeholder map. Capture their role, location, team size, what they own, and what they said they need. A new stakeholder who is now a decision influencer and is invisible in the plan is how accounts get surprised. - **Reversals.** Plans the call changed. If a scheduled session was dropped for a different format, the plan should not still say the old thing. - **Stale commitments.** Things owed for weeks that the call put a date on. Name how long they have been open, because "the field list has been open since 16 July" lands differently from "the field list is pending". - **Durable facts for memory.** Propose them, do not write them. The user approves memory writes. Where files exist, propose each change with the file it touches and wait for approval before editing anything. Overwrites and deletions need explicit confirmation. Where they do not, the proposals are the output and the user files them wherever they keep things. --- ## Step 10: Report Close with: - The file you created, by path, or the document delivered in chat - Anything you committed to their device - The flags that still need them, as a short list - The memory entries you are proposing No recap of the steps. They watched. --- ## What good looks like The test is not whether the recap is accurate. It is whether the user sends the emails without rewriting them, and whether the set includes the two they would have forgotten. Concretely: - The read on the call names something they had not noticed - Every email is short enough that replying is easier than reading - The customer's own words shape at least one draft - Nothing is asserted about the product that has not been checked - The email that is not theirs to send is marked as such rather than quietly drafted - Someone reading the document in three weeks can see what was owed to whom --- ## Reference files - `references/getting-the-transcript.md` - getting a transcript out of any recorder, or asking for one when there is none - `references/email-craft.md` - voice rules, the recap structure, patterns that work, and what kills a draft - `assets/drafts-document-template.md` - the output document skeleton