# Cis Eks V160 3.2.4

> Ensure that the --read-only-port is disabled (Automated)

- Skill: `cyberstrikeus/cis-eks-v160-3-2-4` (Agent Skill)
- Install (CLI): `npx skillmds@latest add cyberstrikeus/cis-eks-v160-3-2-4`
- Raw SKILL.md: https://api.skillmd.com/api/skills/cyberstrikeus/cis-eks-v160-3-2-4/raw
- Safety review: PASS (external: skill-scanner PASS, skillspector PASS)
- Works with: Claude Code, Claude.ai, OpenAI Codex
- Category: DevOps & Infra
- Author: cyberstrikeus (https://skillmd.com/u/cyberstrikeus)
- Updated: 2026-09-17
- Page: https://skillmd.com/skills/cyberstrikeus/cis-eks-v160-3-2-4

---


# 3.2.4 Ensure that the --read-only-port is disabled (Automated)

## Profile Applicability

- Level 1

## Description

Disable the read-only port.

## Rationale

The Kubelet process provides a read-only API in addition to the main Kubelet API. Unauthenticated access is provided to this read-only API which could possibly retrieve potentially sensitive information about the cluster.

Removal of the read-only port will require that any service which made use of it will need to be re-configured to use the main Kubelet API.

## Audit Procedure

If using a Kubelet configuration file, check that there is an entry for `authentication: anonymous: enabled` set to `0`.

First, SSH to the relevant node. Run the following command on each node to find the appropriate Kubelet config file:

```bash
ps -ef | grep kubelet
```

The output of the above command should return something similar to `--config /etc/kubernetes/kubelet/kubelet-config.json` which is the location of the Kubelet config file.

Open the Kubelet config file:

```bash
cat /etc/kubernetes/kubelet/kubelet-config.json
```

Verify that the `--read-only-port` argument exists and is set to `0`.

If the `--read-only-port` argument is not present, check that there is a Kubelet config file specified by `--config`. Check that if there is a `readOnlyPort` entry in the file, it is set to `0`.

## Remediation

If modifying the Kubelet config file, edit the kubelet-config.json file `/etc/kubernetes/kubelet/kubelet-config.json` and set the below parameter to 0:

```json
"readOnlyPort": 0
```

If using executable arguments, edit the kubelet service file `/etc/systemd/system/kubelet.service.d/10-kubelet-args.conf` on each worker node and add the below parameter at the end of the `KUBELET_ARGS` variable string.

```
--read-only-port=0
```

For each remediation: Based on your system, restart the kubelet service and check status

```bash
systemctl daemon-reload
systemctl restart kubelet.service
systemctl status kubelet -l
```

## Default Value

See the Amazon EKS documentation for the default value.

## References

1. [https://kubernetes.io/docs/admin/kubelet/](https://kubernetes.io/docs/admin/kubelet/)

## CIS Controls

| Controls Version | Control                                                            | IG 1 | IG 2 | IG 3 |
| ---------------- | ------------------------------------------------------------------ | ---- | ---- | ---- |
| v8               | 12.6 Use of Secure Network Management and Communication Protocols  |      | X    | X    |
| v7               | 9.2 Ensure Only Approved Ports, Protocols and Services Are Running |      | X    | X    |