# Cis Ubuntu2004 V300 5 3 3 2 5

> Ensure password maximum sequential characters is configured

- Skill: `cyberstrikeus/cis-ubuntu2004-v300-5-3-3-2-5` (Agent Skill)
- Install (CLI): `npx skillmds@latest add cyberstrikeus/cis-ubuntu2004-v300-5-3-3-2-5`
- Raw SKILL.md: https://api.skillmd.com/api/skills/cyberstrikeus/cis-ubuntu2004-v300-5-3-3-2-5/raw
- Safety review: PASS (external: skill-scanner PASS, skillspector PASS)
- Works with: Claude Code, Claude.ai, OpenAI Codex
- Category: Coding & Dev Tools
- Author: cyberstrikeus (https://skillmd.com/u/cyberstrikeus)
- Updated: 2026-09-17
- Page: https://skillmd.com/skills/cyberstrikeus/cis-ubuntu2004-v300-5-3-3-2-5

---


# 5.3.3.2.5 Ensure password maximum sequential characters is configured (Automated)

## Profile Applicability

- Level 1 - Server
- Level 1 - Workstation

## Description

The `pwquality maxsequence` option sets the maximum length of monotonic character sequences in the new password. Examples of such sequence are `12345` or `fedcb`. The check is disabled if the value is `0`.

Note: Most such passwords will not pass the simplicity check unless the sequence is only a minor part of the password.

## Rationale

Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.

Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised.

## Audit Procedure

### Command Line

Run the following command to verify that the `maxsequence` option is set to `3` or less, not `0`, and follows local site policy:

```bash
# grep -Psi -- '^\h*maxsequence\h*=\h*[1-3]\b' /etc/security/pwquality.conf /etc/security/pwquality.conf.d/*.conf
```

Example output:

```
/etc/security/pwquality.conf.d/50-pwmaxsequence.conf:maxsequence = 3
```

Verify returned value(s) are `3` or less, not `0`, and meet local site policy.

Run the following command to verify that `maxsequence` is not set, is `3` or less, not `0`, and conforms to local site policy:

```bash
# grep -Psi -- '^\h*password\h+(requisite|required|sufficient)\h+pam_pwquality\.so\h+([^#\n\r]+\h+)?maxsequence\h*=\h*(0|[4-9]|[1-9][0-9]+)\b' /etc/pam.d/common-password
```

Nothing should be returned.

Note:

- settings should be configured in only one location for clarity
- Settings observe an order of precedence:
  - module arguments override the settings in the `/etc/security/pwquality.conf` configuration file
  - settings in the `/etc/security/pwquality.conf` configuration file override settings in a `.conf` file in the `/etc/security/pwquality.conf.d/` directory
  - settings in a `.conf` file in the `/etc/security/pwquality.conf.d/` directory are read in canonical order, with last read file containing the setting taking precedence
- It is recommended that settings be configured in a `.conf` file in the `/etc/security/pwquality.conf.d/` directory for clarity, convenience, and durability.

## Remediation

### Command Line

Create or modify a file ending in `.conf` in the `/etc/security/pwquality.conf.d/` directory or the file `/etc/security/pwquality.conf` and add or modify the following line to set `maxsequence` to `3` or less and not `0`. Ensure setting conforms to local site policy:

Example:

```bash
#!/usr/bin/env bash

{
  sed -ri 's/^\s*maxsequence\s*=/#  &/' /etc/security/pwquality.conf
  [ ! -d /etc/security/pwquality.conf.d/ ] && mkdir /etc/security/pwquality.conf.d/
  printf '\n%s' "maxsequence = 3" > /etc/security/pwquality.conf.d/50-pwmaxsequence.conf
}
```

Run the following command:

```bash
# grep -Pl -- '\bpam_pwquality\.so\h+([^#\n\r]+\h+)?maxsequence\b' /usr/share/pam-configs/*
```

Edit any returned files and remove the `maxsequence` argument from the `pam_pwquality.so` line(s).

## Default Value

maxsequence = 0

## References

1. NIST SP 800-53 Rev. 5: IA-5

## CIS Controls

| Controls Version | Control                  | IG 1 | IG 2 | IG 3 |
| ---------------- | ------------------------ | ---- | ---- | ---- |
| v8               | 5.2 Use Unique Passwords | \*   | \*   | \*   |
| v7               | 4.4 Use Unique Passwords |      | \*   | \*   |

## MITRE ATT&CK Mappings

| Techniques / Sub-techniques                                                        | Tactics | Mitigations |
| ---------------------------------------------------------------------------------- | ------- | ----------- |
| T1110, T1110.001, T1110.002, T1110.003, T1178.001, T1178.002, T1178.003, T1178.004 | TA0006  | M1027       |