# Cis Ubuntu2004 V300 6 3 2 3

> Ensure system is disabled when audit logs are full

- Skill: `cyberstrikeus/cis-ubuntu2004-v300-6-3-2-3` (Agent Skill)
- Install (CLI): `npx skillmds@latest add cyberstrikeus/cis-ubuntu2004-v300-6-3-2-3`
- Raw SKILL.md: https://api.skillmd.com/api/skills/cyberstrikeus/cis-ubuntu2004-v300-6-3-2-3/raw
- Safety review: PASS (external: skill-scanner PASS, skillspector PASS)
- Works with: Claude Code, Claude.ai, OpenAI Codex
- Category: Security
- Author: cyberstrikeus (https://skillmd.com/u/cyberstrikeus)
- Updated: 2026-09-17
- Page: https://skillmd.com/skills/cyberstrikeus/cis-ubuntu2004-v300-6-3-2-3

---


# 6.3.2.3 Ensure system is disabled when audit logs are full (Automated)

## Profile

- Level 2 - Server
- Level 2 - Workstation

## Description

The `auditd` daemon can be configured to halt the system or put the system in single user mode, if no free space is available or an error is detected on the partition that holds the audit log files.

The `disk_full_action` parameter tells the system what action to take when no free space is available on the partition that holds the audit log files. Valid values are `ignore`, `syslog`, `rotate`, `exec`, `suspend`, `single`, and `halt`.

The `disk_error_action` parameter tells the system what action to take when an error is detected on the partition that holds the audit log files. Valid values are `ignore`, `syslog`, `exec`, `suspend`, `single`, and `halt`.

## Rationale

In high security contexts, the risk of detecting unauthorized access or nonrepudiation exceeds the benefit of the system's availability.

## Impact

`disk_full_action` parameter:

- Set to `halt` - the `auditd` daemon will shutdown the system when the disk partition containing the audit logs becomes full.
- Set to `single` - the `auditd` daemon will put the computer system in single user mode when the disk partition containing the audit logs becomes full.

`disk_error_action` parameter:

- Set to `halt` - the `auditd` daemon will shutdown the system when an error is detected on the partition that holds the audit log files.
- Set to `single` - the `auditd` daemon will put the computer system in single user mode when an error is detected on the partition that holds the audit log files.
- Set to `syslog` - the `auditd` daemon will issue no more than 5 consecutive warnings to syslog when an error is detected on the partition that holds the audit log files.

## Audit Procedure

### Command Line

Run the following command and verify the `disk_full_action` is set to either `halt` or `single`:

```bash
# grep -Pi -- '^\h*disk_full_action\h*=\h*(halt|single)\b' /etc/audit/auditd.conf
disk_full_action = <halt|single>
```

Run the following command and verify the `disk_error_action` is set to `syslog`, `single`, or `halt`:

```bash
# grep -Pi -- '^\h*disk_error_action\h*=\h*(syslog|single|halt)\b' /etc/audit/auditd.conf
disk_error_action = <syslog|single|halt>
```

## Expected Result

`disk_full_action` should be set to `halt` or `single`. `disk_error_action` should be set to `syslog`, `single`, or `halt`.

## Remediation

### Command Line

Set one of the following parameters in `/etc/audit/auditd.conf` depending on your local security policies:

```
disk_full_action = <halt|single>
disk_error_action = <syslog|single|halt>
```

Example:

```
disk_full_action = halt
disk_error_action = halt
```

## References

1. NIST SP 800-53 Rev. 5: AU-2, AU-8, AU-12, SI-5
2. AUDITD.CONF(5)

## CIS Controls

| Controls Version | Control                               | IG 1 | IG 2 | IG 3 |
| ---------------- | ------------------------------------- | ---- | ---- | ---- |
| v8               | 8.2 Collect Audit Logs                | X    | X    | X    |
| v8               | 8.3 Ensure Adequate Audit Log Storage | X    | X    | X    |

MITRE ATT&CK Mappings: T1562, T1562.006 / TA0005 / M1028