# Tunnel Doctor

> MUST be used first for tunnel / proxy-path connectivity failures or slow throughput (网络故障 / 连不上 / 代理或隧道下超时). Diagnoses Tailscale, proxy, TUN, DNS and SSH-tunnel problems on macOS and Windows/WSL, e.g. Tailscale ping works but SSH fails, curl works but browser gets 503, Git/Docker fails behind the proxy, or downloads crawl despite a reachable proxy. Not for application-layer bugs (use debugging-network-issues).

- Skill: `daymade/tunnel-doctor-2` (Agent Skill, multi-file: 14 files)
- Install (CLI): `npx get-skill add daymade/tunnel-doctor-2`
- Raw SKILL.md: https://api.skillmd.com/api/skills/daymade/tunnel-doctor-2/raw
- Safety review: pending (external: skill-scanner PASS, skillspector WARNING)
- Works with: Claude Code, Claude.ai, OpenAI Codex
- Category: DevOps & Infra
- Author: daymade (https://skillmd.com/u/daymade)
- Updated: 2026-11-12
- Page: https://skillmd.com/skills/daymade/tunnel-doctor-2

---


# Tunnel Doctor

Diagnose and fix conflicts when Tailscale coexists with proxy/VPN tools on macOS, with specific guidance for SSH access to WSL instances.

> **Methodology base:** the general diagnostic discipline this skill builds on — evidence over assumption, falsification over confirmation, layered isolation, counter-review — lives in the **debugging-network-issues** skill. This skill is the macOS Tailscale⨯proxy *domain* layer on top of it; reach for the base skill when the symptom is *not* a known Tailscale/proxy conflict.

**Ownership boundary:** this skill owns concrete local network-path operations:
Tailscale, route/DNS/proxy interception, VM/WSL propagation, TUN forwarding
planes, and proxy node/exit/chain capacity. Use `debugging-network-issues` as the
general method when the boundary is still unknown or the symptom belongs to
SSE/CDN/application protocol behavior. This keeps one concrete operator instead
of forcing the user to choose between two overlapping proxy doctors.

## Target and task scope

Before remote probes or changes, establish whether the target is a designated test machine,
an explicitly requested colleague's working computer, or unknown. Use the owner's existing
machine-purpose ledger and current task; do not log into a colleague's machine to classify it.
Saved SSH access and previous successful tests do not grant ongoing use. Use designated test
machines for routine testing; their unavailability does not authorize another person's computer.

Keep an explicitly requested one-off test on a colleague's computer within its stated result
and necessary verification. Stop there on completion, cancellation, or a need for an unapproved
environment change. Move later performance, migration, and regression tests to designated test
machines. A test failure does not authorize disabling that person's proxy/VPN, quitting apps,
changing routes, or installing a background task. Proceed with disruptive repair there only
when the user has explicitly requested that repair and its interruption. Existing authorization
for owner test-machine maintenance remains valid; do not ask again for its routine steps.

Apply this boundary even when invoked directly, through another Skill, after compaction, or
through a peer handoff. After access is stopped, use existing records rather than another SSH
probe to verify that it stopped.

## Disruptive network changes

Before any authorized VPN disconnect, app termination, route cutover, or service restart,
read [network_change_recovery.md](references/network_change_recovery.md). Validate prerequisites
before interruption, arm bounded recovery before the first disruptive action, and verify both
the repaired path and the user's original network use. A successful stop command, a detached
process, or a restart placed at the end of a script is not recovery evidence.

## Conflict Layers

Proxy/VPN tools on macOS create conflicts at several independent layers. Layers 1-3 affect Tailscale connectivity; Layer 4 affects SSH git operations; Layer 5 affects VM/container runtimes. TUN-state failure modes beyond this table — SSH/git connection drops, resolver stall, DIRECT split-brain — are covered in Steps 2H–2J:

| Layer | What breaks | What still works | Root cause |
|-------|-------------|------------------|------------|
| 1. Route table | Everything (SSH, curl, browser) | `tailscale ping` | `tun-excluded-routes` adds `en0` route overriding Tailscale utun |
| 2. HTTP env vars | `curl`, Python requests, Node.js fetch | SSH, browser | `http_proxy` set without `NO_PROXY` for Tailscale |
| 3. System proxy (browser) | Browser only (HTTP 503) | SSH, `curl` (both with/without proxy) | Browser uses VPN system proxy; DIRECT rule routes via Wi-Fi, not Tailscale utun |
| 4. SSH ProxyCommand double tunnel | `git push/pull` (intermittent) | `ssh -T` (small data) | `connect -H` creates HTTP CONNECT tunnel redundant with Shadowrocket TUN; landing proxy drops large/long-lived transfers |
| 5. VM/Container proxy propagation | `docker pull`, `docker build` | Host `curl`, running containers | VM runtime (OrbStack/Docker Desktop) auto-injects or caches proxy config; removing proxy makes it worse (VM traffic via TUN → TLS timeout) |

## Diagnostic Workflow

### Step 1: Identify the Symptom

Name the actual consuming command or service and its required protocols before
choosing a repair. When an authorized directly reachable peer can reach the slow
target, and authenticated SSH plus a representative transfer through that peer
already work better, treat the gateway as an integration candidate. First inspect
the consumer's effective SSH/inventory arguments and test whether its normal entry
can use that path; a successful handwritten `ssh -J` does not prove integration.

If the gateway carries the required workload, connect it through the existing
managed transport and replay the original operation without per-request jump
arguments. Verify target identity, host-key trust, content integrity, elapsed time
and the declared failure/recovery behavior. Do this before further work on a
native relay that is not required by the user's result. Keep exact hosts, ports
and live route state in the owning infrastructure configuration.

Keep unmet protocols explicit: an SSH gateway does not establish UDP or arbitrary
application connectivity. Continue the relevant network repair when those are
required; do not replace that acceptance with SSH success. The executing agent
must judge protocol fit and user intent; no bundled checker establishes either.

Determine which scenario applies:

- **Public gateway returns 502 while its backend responds normally, or the dedicated SSH tunnel key is rejected as `correct key but not from a permitted host`** → read [SSH tunnel source restrictions](references/ssh_tunnel_source_restriction.md) before changing TUN/firewall rules or treating a running process as recovery.
- **Browser returns HTTP 503, but `curl` and SSH both work** → System proxy bypass conflict (Step 2C)
- **`local.<domain>` fails in browser/default `curl`, but direct/no-proxy request works** → Local vanity domain proxy interception (Step 2C-1)
- **Tailscale ping works, SSH works, but curl/HTTP times out** → HTTP proxy env var conflict (Step 2A)
- **Tailscale ping works, SSH/TCP times out** → Check route ownership (Step 2B); a matching symptom alone does not prove a route conflict.
- **Tailscale IPv4 SSH times out, or an alternate peer address triggers host-key verification** → Read [same-peer IPv4/IPv6 SSH recovery](references/tailscale_address_family_ssh.md) before declaring the host offline or changing trust/network state.
- **Remote dev server auth redirects to `localhost` → browser can't follow** → SSH tunnel needed (Step 2D)
- **`make status` / scripts curl to localhost fail with proxy** → localhost proxy interception (Step 2E)
- **`git push/pull` fails with `FATAL: failed to begin relaying via HTTP`** → SSH double tunnel (Step 2F)
- **`docker build` `RUN apk/apt` fails with `Connection refused` instantly** → OrbStack transparent proxy + TUN conflict (Step 2G-1, fix: `--network host`)
- **`docker pull` fails with `TLS handshake timeout`** → VM proxy misconfiguration (Step 2G-2, fix: `docker.json` with `host.internal`)
- **Container healthcheck `(unhealthy)` but app runs fine** → Lowercase proxy env var leak (Step 2G-4, fix: clear `http_proxy`+`HTTP_PROXY`)
- **`docker build` can't fetch base images** → VM/container proxy propagation (Step 2G)
- **`docker pull` works but `docker build` still dies fetching base-image tokens (TLS/i-o timeout) on a WSL2 + Docker Desktop host, or every runbook proxy port on a Windows+v2rayN host silently died after a v2rayN upgrade** → buildkit direct-dials past the DD proxy override / v2rayN ≥7.17 LAN-port split (references/windows_host_tun_wsl_cascade.md §2026-08-23)
- **`git clone` fails with `Connection closed by 198.18.x.x`** → two different mechanisms produce this; Step 2H separates them
- **Every domestic/DIRECT-rule site fails at once (TLS `unexpected EOF` mid-handshake, proxy-port CONNECT returns 503, Node CLIs report `UNKNOWN_CERTIFICATE_VERIFICATION_ERROR`) while proxied overseas sites keep working** → TUN DIRECT split-brain (Step 2J)
- **One hostname fails after a DNS/delegation move while other sites work** → read [single-host DNS migration](references/single-host-dns-migration.md) before diagnosing a broken forwarding plane or restarting a shared tunnel.
- **Everything on macOS fails at once — domestic AND overseas, and even Step 2J's real-IP probe fails** → do not declare an outage yet; run the physical-interface discriminator in "TUN full-stall vs genuine outage" (above Step 2A)
- **Shadowrocket 一打开就高速开关，或 `neagent`/PlugInKit 反复报 `Failed to start extension` / `could not acquire startup assertion`** → 先按 [Network Extension state and stale-listener recovery](references/network_change_recovery.md#network-extension-state-and-stale-listener-recovery) 对齐实际 actor、扩展生命周期与精确 listener；不要先重启所有 watchdog 或相邻 daemon
- **SSH connects but `operation not permitted`** → Tailscale SSH config issue (Step 4)
- **SSH connects but `be-child ssh` exits code 1** → WSL snap sandbox issue (Step 5)
- **TCP port 22 reachable (`nc -z` succeeds) but SSH fails with `kex_exchange_identification: Connection closed`** → Tailscale SSH proxy intercept on WSL (Step 5A)
- **Same `kex_exchange_identification` / `Connection closed by UNKNOWN port 65535`, but there is no Tailscale — you are behind a TUN and the host is a public cloud VM whose HTTPS still works** → could be your TUN *or* the destination's firewall allowlist; they are indistinguishable from the client. Step 2K settles it out-of-band
- **Every node of one proxy provider stalls identically (TCP connects, TLS `appconnect=0.000`), and restarting the local proxy app + packet-tunnel extension changes nothing** → provider-level event, not your tunnel; confirm with the provider's control plane and switch to a *different* provider's node (Step 2L)
- **Every tested node of one proxy provider fails fast with TLS `unrecognized name`, while subscription refresh still works** → check the provider's account dashboard for traffic limits, billing or suspension first; the symptom does not establish the cause. Read [provider account checks](references/provider_account_suspension.md) before rebuilding tunnels or restarting proxy processes.
- **`tailscale ssh` returns "not available on App Store builds"** → Wrong Tailscale distribution on macOS (Step 5B)
- **Any tool using system DNS (`ssh`, `curl`, `git`) hangs ~60s before resolving, but `nslookup` returns instantly** → Stalled resolver in `getaddrinfo` chain (Step 2I)
- **Windows+WSL host: everything offline at once (domestic AND overseas), WSL dead too, "even Tailscale won't come online" — and/or the user tried several recovery actions (switched NICs, toggled TUN) and can't tell which one fixed it** → Windows host TUN cascade + event-log forensics (Step 5C)
- **Tailscale, DNS, route ownership, and proxy reachability all pass, but large transfers remain slow and switching the active proxy node changes throughput** → proxy node / exit / chain capacity workflow in [references/proxy_node_chain_throughput.md](references/proxy_node_chain_throughput.md)
- **You want one app's bulk traffic (BaiduNetdisk downloads, Feishu/Lark uploads) off the metered proxy — or out of the status-bar counter entirely** → not a conflict; a splitting task. Use the existing local traffic-splitting workflow if one is installed and verified; this skill does not bundle a splitter, target list, replay helper or subscription-wipe guard. For mechanism diagnosis, read [references/proxy_conflict_reference.md](references/proxy_conflict_reference.md) § "Per-app traffic splitting on macOS" — which of the three mechanisms (DIRECT rule / `tun-excluded-routes` / `always-real-ip`) can work for the app depends on whether it connects to literal IPs or the system resolver, and the DNS-layer keys are inert on the macOS Catalyst build.

**Key distinctions**:
- SSH does NOT use `http_proxy`/`NO_PROXY` env vars. If SSH works but HTTP doesn't → Layer 2.
- `curl` uses `http_proxy` env var, NOT the system proxy. Browser uses system proxy (set by VPN). If `curl` works but browser doesn't → Layer 3.
- If `tailscale ping` works but regular `ping` doesn't → Layer 1 (route table corrupted).
- If `ssh -T git@github.com` works but `git push` fails intermittently → Layer 4 (double tunnel).
- If host `curl https://...` works but `docker pull` times out → Layer 5 (VM proxy propagation).
- If `docker pull` works but `docker build` `RUN apk add` fails instantly with `Connection refused` → OrbStack transparent proxy broken by TUN (Step 2G-1).
- If container healthcheck shows `(unhealthy)` but app works → lowercase `http_proxy` leaked into container (Step 2G-4).
- If DNS resolves to `198.18.x.x` virtual IPs → a TUN is active, which is **not** by itself a diagnosis: under TUN every hostname resolves this way, on success as well as failure. Go to Step 2H to find out which mechanism you have.
- If fake-IP connections fail but a fresh-IP `curl --resolve` succeeds, hostname-dependent resolution/forwarding is a suspect, not a proven cause. Use Step 2J for the multi-domain DIRECT failure pattern; for one recently moved domain, use [single-host DNS migration](references/single-host-dns-migration.md).
- If `nc -z` succeeds on port 22 but SSH gets no banner (`kex_exchange_identification`) → Tailscale SSH proxy intercept (Step 5A). Confirm with `tcpdump -i any port 22` on the remote — 0 packets means Tailscale intercepts above the kernel.
- If `nc -z` also succeeds on a port the destination does **not** serve (probe 65001) → under a TUN the local stack answers for the destination, so **no `nc -z` result on that host means anything**. Never read a port probe you have not calibrated this way. This supersedes the plain `nc -z` reading in the bullet above whenever a TUN — not just Tailscale — is in the path (Step 2K).
- If the destination's own `journalctl -u ssh` shows **zero** entries for your attempts → something before `sshd` is eating them, but **not necessarily the network**: a host-local packet filter drops them just as silently. `tcpdump` on the host separates "never arrived" from "arrived and was dropped locally"; only the first implicates your TUN. Reach the machine through the cloud provider's guest-agent channel to ask, since that path does not use the port you cannot reach. Check the journal, not `auth.log`: on Ubuntu 24.04 `sshd` writes nothing to `auth.log`, so an empty file there is not evidence (Step 2K).
- A cloud host enforces an inbound port **twice** — provider security group *and* host firewall (`ufw`/`firewalld`/`nftables`). Adding your IP to one leaves the other blocking, with no signal that you only did half the job (Step 2K).
- If `tailscale ssh` fails with "not available on App Store builds" → install Standalone Tailscale (Step 5B).
- If `nslookup <host>` is fast (<0.1s) but `dscacheutil -q host -a name <host>` takes 60s+ → a supplemental resolver in `scutil --dns` is dead (Step 2I).
- If `ping <resolver-ip>` succeeds but `dig @<resolver-ip>` times out → daemon dead, `utun` interface zombied. ICMP is answered by the interface; the actual port-53 service is gone (Step 2I).
- If `ssh -vvv` hangs immediately after `debug2: resolving "<host>" port <port>` and never reaches `debug1: connect to address` → DNS resolution stage, not network connect stage. This is Step 2I, not Step 2B/2H.

### Diagnosis Discipline (Read Before Committing to a Hypothesis)

When symptoms point at a component (proxy, VPN, route table, DNS), **don't commit to a hypothesis from circumstantial evidence — verify with that component's own health endpoint first.** Each component has a one-line health check faster and more reliable than ruling out neighbors:

| Suspected component | Authoritative health check (run this first) |
|---------------------|---------------------------------------------|
| HTTP proxy (Shadowrocket / Clash / Surge) | `lsof -nP -iTCP:<port> -sTCP:LISTEN` proves the exact address is listening, then `curl -x http://127.0.0.1:<port> -m 10 https://api.github.com` returns 200 through that loopback listener; Connected or a LAN-only listener is not a substitute |
| Tailscale daemon | `tailscale status` returns a running backend and peer list (not `Tailscale is stopped`), then a real `tailscale ping` succeeds; `scutil --nc` Connected alone certifies only the network-configuration state |
| A specific DNS resolver | `dig @<nameserver-ip> +tries=1 +timeout=3 example.com` <100ms |
| Routing for an IP | `route -n get <ip>` shows expected interface |
| Per-resolver bisection (when DNS is suspect) | The `for ns in ...; do dig @$ns ...` loop in Step 2I |
| All nodes of one proxy provider dead but subscription refresh works | Provider account dashboard (suspended / traffic limit / billing) — before ANY local repair action |
| An agent CLI complaining "can't connect / keeps reconnecting" (Codex etc.) | The client's own runtime log, bucketed by error shape and by hour — for Codex: `logs` table in the newest `~/.codex/logs_*.sqlite`. Errors clustered in time windows = episodic transport (keep reading here); a single failing `process_uuid` among clean ones = per-process cause (e.g. stale token), not the network at all |

For a Codex app-server that emits neither a handshake nor a useful log, read
[startup before the local protocol](references/codex-startup-before-handshake.md)
before repeating the transport probe or changing authentication.

**Why this matters**: A symptom that matches the description of Step 2X does not, by itself, prove component X is the problem. Multiple layers can produce overlapping symptoms (a 60-second hang during `git push` could be proxy node death, fakeip route corruption, or DNS resolver stall — all plausible from the user-visible symptom alone). Reaching for the most specific verification first avoids committing to a wrong layer and chasing it down a dead end.

If the failing operation involves DNS at all, **run the per-nameserver bisection from Step 2I before suspecting proxy or routing**. It rules in/out the largest single class of macOS-on-China-network failures in under 15 seconds.

### TUN Measurement Contamination (what your probes lie about while a TUN proxy is up)

When a proxy tool runs in **TUN / global mode** (Shadowrocket, Clash, Surge), it intercepts traffic at the routing layer and fabricates parts of the network stack locally. Several everyday diagnostic commands then return **fabricated or misrouted numbers** — trusting them sends the whole investigation the wrong way. Know what each probe actually measures under TUN:

| Probe | What it looks like | What it actually is under TUN | Trust? |
|-------|-------------------|-------------------------------|--------|
| `nc -z <node-ip> <port>` / raw TCP connect showing `0.00s` | "node reachable, instant" | TUN completes the TCP handshake **locally** before tunneling. `0.00s` to an overseas host is physically impossible (light alone is tens of ms each way) — you connected to the TUN, not the node. | ❌ |
| `ping <host>` with near-zero loss / sub-ms RTT | "link healthy" | TUN can answer ICMP locally; loss and RTT are fabricated and uncorrelated with TCP. (Separately: ICMP ≠ TCP even with no TUN.) | ❌ |
| `curl … -w '%{remote_ip}'` | "connected to peer X" | Always the local TUN endpoint (`127.0.0.1` / loopback), never the real remote peer. | ❌ |
| IP-geo lookup via a **foreign** service (an `ip-api`-style endpoint) | "my egress / home IP is …" | A foreign-domain request gets routed **through the proxy**, so it reports the **exit IP**, not your real local/home IP. | ❌ for "what is my real local IP" |
| IPv4-vs-IPv6 path choice, HTTP/3 / QUIC speedup | varies | TUN typically does not forward UDP/443, so QUIC never leaves. The comparison is meaningless. | ❌ |
| A DIRECT-rule / domestic domain succeeding through your proxy config, cited as evidence the tunnel/exit node is alive | "the proxy has at least one working path, so the tunnel is probably fine" | DIRECT-matched traffic never enters the tunnel — it exits locally via your real last mile, identically to the proxy not running at all. Its success says nothing about the *proxied* plane. (Observed 2026-09-22: an overseas API endpoint that "worked through the proxy" during a collection-health check turned out to hit a DIRECT bypass rule; a no-proxy-at-all retest succeeded identically, proving the tunnel itself had never been exercised.) | ❌ for "is the tunnel/exit node healthy" |
| `networkQuality` with no `-I` flag | "my real down/uplink capacity" | The default run rides whatever owns the default route — under TUN that is the **tunnel**, not the wire (verified 2026-10-23: the identical run moved 64.7 → 472.6 Mbps after a node switch). Good for "is my tunnel slow", wrong as a wire baseline. Whether it exercises the node at all depends on the tool's rules for the test endpoints; a number that moves when the node changes is proof it rode the tunnel. | ✅ for tunneled capacity / ❌ for physical baseline |
| `curl ifconfig.me` / ipify exit IP used to name *which node* is active | "exit IP 1.2.3.4 means we're on node X" | The exit IP belongs to the *exit*, not the entry node: residential-IP products exit from ISP addresses that share nothing with the node address (measured 2026-10-23: a Comcast residential exit belonged to a "static residential" product, not to the datacenter node it entered through; full address withheld). Naming the active node from an exit IP misattributes success and failure to the wrong subscription. | ❌ for node attribution |

**What you *can* trust under TUN:**
- **`time_appconnect` / `time_starttransfer`** from `curl` (application-layer handshake / TTFB) — these complete only after the tunneled connection actually establishes, so they reflect the real end-to-end path.
- **A capacity number from `networkQuality -s -I <physical-if>`** (`-I` = "Bind test to interface", per its own help) as the wire baseline — it bypasses the tunnel the same way curl's `--interface` does. Trust the capacity figures; do not compare the latency/responsiveness sub-metrics across binding modes — an interface-bound run has reported higher idle latency than the tunneled run on a healthy host.
- **An in-region / domestic IP-geo source** for "what is my real local ISP" — an in-region domain hits the proxy's DIRECT rule and exits your real last mile (the foreign source gets tunneled and lies; see table). The same DIRECT-hit property is **not** evidence for the tunnel's own health — see the table row above; check `proxyBypassHosts`/DIRECT rule lists before crediting any single host's success to the tunnel.
- **The proxy/TUN config decoded from disk + the tool's own GUI** — the authoritative source of which node/route is actually active. Cross-check a file parse against the GUI; do not infer the active node from a network probe.

**Counter-move**: before citing any latency / reachability number while a TUN is up, ask *"would this number be physically possible if the packet really traversed to the destination?"* A `0.00s` connect or a `0.2ms` ping to another continent is the tell that you measured the TUN, not the network. Switch to `time_appconnect`, or temporarily disable the TUN to get a clean baseline (raw probes become meaningful again once it is off).

### TUN full-stall vs genuine outage (when EVERYTHING fails, prove the wire is dead before standing down)

The contamination table has a systemic limit: every probe that goes *through* the TUN shares one fate. That includes "real-IP" probes (`dig @<resolver>` + `curl --resolve`) — the TUN intercepts UDP/53 too. When the TUN's forwarder stalls completely, domain probes, real-IP probes and proxied probes all fail together, and the picture is **indistinguishable from a genuine physical outage**. A watchdog or investigator that reads "all probes dead" as "the network is down" will stand down through a recoverable TUN stall — or worse, blame the router (observed 2026-09-10: a proxy health daemon recorded 13 "genuine network outage, standing down" windows in one day; the layer was never proven either way until a physical-path probe was added).

The discriminator is a probe that **bypasses the TUN entirely** — bind the physical interface (curl `--interface` = `IP_BOUND_IF`, scoped routes take the packet straight out the physical NIC):

```bash
# 1) Find the physical interface that actually carries the LAN. Do NOT use
#    `route -n get default` here — under TUN it answers with the utun itself.
for i in en0 en1 en2 en3; do
  addr=$(ipconfig getifaddr $i 2>/dev/null) && echo "$i $addr"
done
ping -c 1 -t 2 <gateway-ip>   # sanity: is the LAN itself alive at all

# 2) Probe bare-IP targets through that interface — two independent ones.
#    Both verified answering on a healthy link 2026-09-10 (AliDNS 443 → 404,
#    DNSPod 80 → 404). Targets rot: 114.114.114.114 and 180.76.76.76 returned
#    000 on a healthy wire that same day — re-verify a target before trusting it.
for u in "https://223.5.5.5/" "http://119.29.29.29/"; do
  curl -s --noproxy '*' --interface en0 -k --connect-timeout 3 --max-time 6 \
    -o /dev/null -w "$u: %{http_code}\n" "$u"
done
```

- Any non-`000` answer (even 404) → the physical path (NIC → AP → gateway → ISP) is alive and the TUN is the suspect: reconnect the tunnel **under the [recovery contract](references/network_change_recovery.md)** (the disconnect/connect mechanism lives in Step 2J) — do not stand down, do not reboot the router.
- `000` from **both** targets → a genuine outage is earned. A single target's 000 proves only that target: enterprise/campus egress whitelists and resolver-side changes each produce a lone 000 on a healthy wire.

Calibrate before trusting: on a healthy link each answer arrives in ~0.1s; a deliberately wrong interface must fail — `--interface en9` returns `000` with a nonzero exit (45 when the interface doesn't exist, 7/28 when it exists but is down or unrouted — the `000`, not the exit number, is the signal).

### Fast Path: Run Automated Checks

For common macOS conflicts (env proxy, system proxy exceptions, direct/proxy path split, local TLS trust), run:

```bash
python3 scripts/quick_diagnose.py --host local.example.com --url https://local.example.com/health
```

Optional route ownership check for a Tailscale destination:

```bash
python3 scripts/quick_diagnose.py --host <target-host> --url http://<target-host>:<port>/health --tailscale-ip <100.x.x.x>
```

Interpretation:
- `direct=PASS` + `ambient=FAIL` + `forced_proxy=FAIL` supports investigating the shell proxy path. `direct=PASS` + `system_proxy=FAIL` is a warning until the affected browser or system client fails too; only then consider a host-specific bypass.
- `forced_proxy` uses the target URL's proxy environment (`https_proxy` for HTTPS, `http_proxy` for HTTP, then `all_proxy`); a failed forced probe alone is not a reason to change a working ambient path.
- `direct=FAIL` does not support a bypass recommendation. A non-`000` HTTP response (including 403) proves a response arrived, not that the application accepted the request.
- `strict_tls=FAIL` + `direct=PASS` = path is reachable; trust issue only (install/trust local CA).
- `host in scutil exceptions: no` is context, not a fault by itself. The script's `direct` probe bypasses curl proxies but may still traverse a system TUN; it does not prove an independent physical path.

### Step 2A: Fix HTTP Proxy Environment Variables

Check if proxy env vars are intercepting Tailscale HTTP traffic:

```bash
env | grep -i proxy
```

**Broken output** — proxy is set but `NO_PROXY` doesn't exclude Tailscale:
```
http_proxy=http://127.0.0.1:1082
https_proxy=http://127.0.0.1:1082
NO_PROXY=localhost,127.0.0.1          ← Missing Tailscale!
```

**Fix** — add Tailscale MagicDNS domain + CIDR to `NO_PROXY`:

```bash
export NO_PROXY=localhost,127.0.0.1,.ts.net,100.64.0.0/10,192.168.*,10.*,172.16.*
```

| Entry | Covers | Why |
|-------|--------|-----|
| `.ts.net` | MagicDNS domains (`host.tailnet.ts.net`) | Matched before DNS resolution |
| `100.64.0.0/10` | Tailscale IPs (`100.64.*` – `100.127.*`) | Precise CIDR, no public IP false positives |
| `192.168.*,10.*,172.16.*` | RFC 1918 private networks | LAN should never be proxied |

**Two layers complement each other**: `.ts.net` handles domain-based access, `100.64.0.0/10` handles direct IP access.

**NO_PROXY syntax pitfalls** — see [references/proxy_conflict_reference.md](references/proxy_conflict_reference.md) for the compatibility matrix.

**Go `net/http` CIDR caveat**: Go's standard `net/http` does NOT support CIDR notation in `NO_PROXY`. Setting `NO_PROXY=100.64.0.0/10` works for curl and Python, but Go programs (including Tailscale-adjacent tooling) will still send traffic through the proxy. The fix is to use MagicDNS hostnames (e.g., `my-wsl-box`) instead of raw IPs, or add explicit hostnames to `NO_PROXY`:

```bash
# WRONG for Go programs — CIDR is silently ignored
NO_PROXY=100.64.0.0/10 go-program http://100.101.102.103:8002/health  # → goes through proxy

# CORRECT — use hostname (matched as suffix) or explicit IP
export NO_PROXY=localhost,127.0.0.1,.ts.net,my-wsl-box,100.101.102.103,192.168.*,10.*,172.16.*
```

This is especially relevant when accessing Tailscale services from Go-based tools (e.g., custom CLIs, Go test suites hitting remote APIs).

Verify the fix:

```bash
# Both must return HTTP 200:
NO_PROXY="...(new value)..." curl -s --connect-timeout 5 http://<host>.ts.net:<port>/health -w "HTTP %{http_code}\n"
NO_PROXY="...(new value)..." curl -s --connect-timeout 5 http://<tailscale-ip>:<port>/health -w "HTTP %{http_code}\n"
```

Then persist in shell config (`~/.zshrc` or `~/.bashrc`).

### Step 2B: Detect Route Conflicts

Check if a proxy tool hijacked the Tailscale CGNAT range:

```bash
route -n get <tailscale-ip>
```

**Healthy output** — traffic goes through Tailscale interface:
```
destination: 100.64.0.0
interface: utun7    # Tailscale interface (utunN varies)
```

**Broken output** — proxy hijacked the route:
```
destination: 100.64.0.0
gateway: 192.168.x.1    # Default gateway
interface: en0           # Physical interface, NOT Tailscale
```

**Important**: Not all `utun` interfaces are Tailscale's. Verify which utun belongs to Tailscale before concluding the route is correct:

```bash
# Find Tailscale's utun interface (has a 100.x.x.x IP)
ifconfig | grep -A2 'inet 100\.'
```

Quick indicators by MTU:
- **MTU 1280** → typically Tailscale
- **MTU 4064** → typically Shadowrocket TUN

If `route -n get` shows traffic going to a utun with MTU 4064, it is hitting Shadowrocket's TUN, not Tailscale — this is still a route conflict even though the interface name starts with `utun`.

Confirm with full route table:

```bash
netstat -rn | grep 100.64
```

Two competing routes indicate a conflict:
```
100.64/10  192.168.x.1   UGSc  en0       ← Proxy added this (wins)
100.64/10  link#N        UCSI  utun7     ← Tailscale route (loses)
```

**Root cause**: On macOS, `UGSc` (Static Gateway) takes priority over `UCSI` (Cloned Static Interface) for the same prefix length.

### Step 2C: Fix System Proxy Bypass (Browser 503)

**Symptom**: Browser shows HTTP 503 for `http://<tailscale-ip>:<port>`, but both `curl --noproxy '*'` and `curl` (with proxy env var) return 200. SSH also works.

**Root cause**: The browser uses the system proxy configured by the VPN profile (Shadowrocket/Clash/Surge). The proxy matches `IP-CIDR,100.64.0.0/10,DIRECT` and tries to connect directly — but "directly" means via the Wi-Fi interface (en0), NOT through Tailscale's utun interface. The proxy process itself doesn't have a route to Tailscale IPs, so the connection fails with 503.

**Diagnosis**:

```bash
# curl with proxy env var works (curl connects to proxy port, but traffic flows differently)
curl -s -o /dev/null -w "%{http_code}" http://<tailscale-ip>:<port>/
# → 200

# Browser gets 503 because it goes through the VPN system proxy, not http_proxy env var
```

**Fix** — add Tailscale CGNAT range to `skip-proxy` in the proxy tool config:

For Shadowrocket, in `[General]`:
```
skip-proxy = 192.168.0.0/16, 10.0.0.0/8, 172.16.0.0/12, 100.64.0.0/10, localhost, *.local, captive.apple.com
```

`skip-proxy` tells the system "bypass the proxy entirely for these addresses." The browser then connects directly through the OS network stack, where Tailscale's routing table correctly handles the traffic.

**Why `skip-proxy` works but `tun-excluded-routes` doesn't**:
- `skip-proxy`: Bypasses the HTTP proxy layer only. Traffic still flows through the TUN interface and Tailscale utun handles it. Safe.
- `tun-excluded-routes`: Removes the CIDR from the TUN routing entirely. This creates a competing `en0` route that overrides Tailscale. Breaks everything.

#### Step 2C-1: Fix Local Vanity Domain Interception (`local.<domain>`)

**Symptom**: `https://local.<domain>` fails in browser or default `curl`, but succeeds with direct/no-proxy command:

```bash
env -u http_proxy -u https_proxy curl -k -I https://local.<domain>/health
# -> 200
curl -I https://local.<domain>/health
# -> proxy CONNECT then TLS reset/failure
```

**Root cause**: The domain is routed through system/shell proxy instead of local direct path.

**Fix**:
1. Add domain to proxy app bypass list (`skip-proxy` for Shadowrocket).
2. Add domain to shell bypass list (`NO_PROXY`/`no_proxy`).
3. If local TLS uses internal CA, trust the local root certificate.

```bash
# ~/.zshrc
export NO_PROXY=localhost,127.0.0.1,.ts.net,100.64.0.0/10,192.168.*,10.*,172.16.*,local.<domain>,www.local.<domain>
export no_proxy="$NO_PROXY"
```

**Verification**:

```bash
python3 scripts/quick_diagnose.py --host local.<domain> --url https://local.<domain>/health
```

Expected:
- `host in NO_PROXY: yes`
- `host in scutil exceptions: yes`
- `ambient=PASS` and `direct=PASS`

### Step 2D: Fix Auth Redirect for Remote Dev (SSH Tunnel)

**Symptom**: Dev server runs on a remote machine (e.g., Mac Mini via Tailscale). You access `http://<tailscale-ip>:3010` in the browser. Login/signup works, but after auth, the app redirects to `http://localhost:3010/` which fails — `localhost` on your machine isn't running the dev server.

**Root cause**: The app's `APP_URL` (or equivalent) is set to `http://localhost:3010`. Auth libraries (Better-Auth, NextAuth, etc.) use this URL for callback redirects. Changing `APP_URL` to the Tailscale IP introduces Shadowrocket proxy conflicts and breaks local development on the remote machine.

**Fix** — SSH local port forwarding. This avoids all three conflict layers entirely:

```bash
# Forward local port 3010 to remote machine's localhost:3010
ssh -NL 3010:localhost:3010 <tailscale-ip>

# Or with autossh for auto-reconnect (recommended for long sessions)
autossh -M 0 -f -N -L 3010:localhost:3010 \
    -o "ServerAliveInterval=30" \
    -o "ServerAliveCountMax=3" \
    -o "ExitOnForwardFailure=yes" \
    <tailscale-ip>
```

Now access `http://localhost:3010` in the browser. Auth redirects to `localhost:3010` → tunnel → remote dev server → works correctly.

**Why this is the best approach**:
- No `.env` changes needed — `APP_URL=http://localhost:3010` works everywhere
- No Shadowrocket conflicts — `localhost` is always in `skip-proxy`
- No code changes — same behavior as local development
- Industry standard — VS Code Remote SSH, GitHub Codespaces use the same pattern

**Install autossh**: `brew install autossh` (macOS) or `apt install autossh` (Linux)

**Kill background tunnel**: `pkill -f 'autossh.*<tailscale-ip>'`

### Step 2E: Fix localhost Proxy Interception in Scripts

**Symptom**: Makefile targets or scripts that `curl` localhost (health checks, warmup routes) fail or timeout when `http_proxy` is set globally in the shell.

**Root cause**: `http_proxy=http://127.0.0.1:1082` is set in `~/.zshrc` but `no_proxy` doesn't include `localhost`. All curl commands send localhost requests through the proxy.

**Fix** — add `--noproxy localhost` to all localhost curl commands in scripts:

```makefile
# WRONG — fails when http_proxy is set
@curl -sf http://localhost:9000/minio/health/live && echo "OK"

# CORRECT — always bypasses proxy for localhost
@curl --noproxy localhost -sf http://localhost:9000/minio/health/live && echo "OK"
```

Alternatively, set `no_proxy` globally in `~/.zshrc`:

```bash
export no_proxy=localhost,127.0.0.1
```

### Step 2F: Fix SSH ProxyCommand Double Tunnel (git push/pull failures)

**Symptom**: `ssh -T git@github.com` succeeds consistently, but `git push` or `git pull` fails intermittently with:

```
FATAL: failed to begin relaying via HTTP.
Connection closed by UNKNOWN port 65535
```

Small operations (auth, fetch metadata) work; large data transfers fail.

**Root cause**: When Shadowrocket TUN is active, it already routes all TCP traffic through its VPN tunnel. If SSH config also uses `ProxyCommand connect -H`, data flows through two proxy layers — the landing proxy drops large/long-lived HTTP CONNECT connections.

**Diagnosis**:

```bash
# 1. Confirm Shadowrocket TUN is active
ifconfig | grep '^utun'

# 2. Check SSH config for ProxyCommand
grep -A5 'Host github.com' ~/.ssh/config

# 3. Confirm: removing ProxyCommand fixes push
GIT_SSH_COMMAND="ssh -o ProxyCommand=none" git push origin main
```

**Fix** — remove ProxyCommand and switch to `ssh.github.com:443`. See [references/proxy_conflict_reference.md § SSH ProxyCommand and Git Operations](references/proxy_conflict_reference.md) for the full SSH config, why port 443 helps, and fallback options when VPN is off.

### Step 2G: Fix VM/Container Runtime Proxy Propagation (Docker pull/build failures)

**Symptom**: `docker pull` or `docker build` fails with `net/http: TLS handshake timeout`, `Connection refused` from Alpine/Debian repos, or `Internal Server Error` from `auth.docker.io`, while host `curl` to the same URLs works fine.

**Applies to**: OrbStack, Docker Desktop, or any VM-based Docker runtime on macOS with Shadowrocket/Clash TUN active.

**Root cause**: VM-based Docker runtimes (OrbStack, Docker Desktop) run the Docker daemon inside a lightweight VM. The VM's outbound traffic takes a different network path than host processes:

```
Host process (curl):   Process → TUN (Shadowrocket) → landing proxy → internet ✅
VM process (Docker):   Docker daemon → VM bridge → host network → TUN → ??? ❌
```

The TUN handles host-originated traffic correctly but may drop or delay VM-bridged traffic (different TCP stack, MTU, keepalive behavior).

**Critical distinction: `docker pull` vs `docker build` use different proxy paths**:

| Operation | Proxy source | What controls it |
|-----------|-------------|------------------|
| `docker pull` | Docker daemon config | `~/.orbstack/config/docker.json` or `docker info` |
| `docker build` (`RUN apt/apk`) | Build container env | `--build-arg http_proxy=...` or `--network host` |
| `docker run` | Container env | `-e http_proxy=...` or inherited from daemon |

Fixing `docker.json` alone will NOT fix `docker build` — the `RUN` commands inside the build container don't inherit daemon proxy settings.

**Diagnosis** — identify which sub-problem:

```bash
# 1. Can the Docker daemon pull images?
docker pull --quiet alpine:latest 2>&1

# 2. Can a RUN command inside a build reach the internet?
docker build --no-cache - <<'EOF' 2>&1
FROM alpine:latest
RUN apk update && echo "APK OK"
EOF

# 3. Can a running container reach the internet?
docker run --rm alpine:latest sh -c "apk update 2>&1 | head -3"
```

**Four sub-problems and their fixes**:

#### 2G-1: `docker build` fails but host works (most common with OrbStack + Shadowrocket)

**Symptom**: `RUN apk add` or `RUN apt-get install` inside `docker build` fails with `Connection refused` instantly (< 0.2s), even though host `curl` to the same URL works.

**Root cause**: OrbStack's `network

…(truncated)
