# Secure Agent > Locks down an AI agent by configuring platform-level tool restrictions (deniedTools) and Earl network egress rules. Use after Earl is working and templates are created, to make Earl's security guarantee enforceable rather than advisory. - Skill: `diegosouzapw/secure-agent` (Agent Skill, multi-file: 2 files) - Install (CLI): `npx skillmds@latest add diegosouzapw/secure-agent` - Raw SKILL.md: https://api.skillmd.com/api/skills/diegosouzapw/secure-agent/raw - Safety review: pending (external: skill-scanner PASS, skillspector PASS) - Works with: Claude Code, Claude.ai, OpenAI Codex - Category: AI & ML - Author: diegosouzapw (https://skillmd.com/u/diegosouzapw) - Updated: 2026-09-08 - Page: https://skillmd.com/skills/diegosouzapw/secure-agent --- # Secure Agent After Earl is set up and working, this skill restricts the agent's ability to bypass Earl and make raw API/CLI calls directly. Without this step, CLAUDE.md is just a suggestion. ## What This Does 1. **`deniedTools`**: Blocks specific bash commands (curl, gh, stripe-cli, etc.) at the platform level for Claude Code. Agents cannot run these commands at all. 2. **Egress rules**: Restricts which URLs Earl templates can contact, preventing Earl itself from being used as an open proxy. ## Important Limitation `deniedTools` pattern matching can be bypassed via alternative tools (`python3 -c "import urllib..."`, `node -e "fetch(...)"`, etc.). This blocks accidental or habitual CLI use — the common case. For stronger containment, pair with OS-level firewall rules or a network proxy. ## Platform Support | Platform | Mechanism | Hard restriction? | | ---------------------- | -------------------------------------------- | ------------------------------------------------------- | | **Claude Code** | `deniedTools` in `.claude/settings.json` | Yes — platform enforced | | **Cursor** | `.cursor/mcp.json` or Cursor settings UI | Partial — check Cursor docs for per-tool restrictions | | **Windsurf** | `.windsurf/mcp.json` or Windsurf settings UI | Partial — check Windsurf docs for per-tool restrictions | | **Claude Desktop** | No bash access | N/A | | **Non-MCP CLI agents** | CLAUDE.md instructions only | No — advisory only | This skill primarily targets Claude Code. Instructions for other platforms are best-effort. --- ## Step 1: Check Coverage Only deny tools for services that have Earl templates. Denying a tool for a service with no Earl template would leave the agent unable to interact with that service at all. ```bash earl templates list --json ``` Note which providers are covered. Map each to the CLI tools to deny: | Earl template covers | Deny these tools | | --------------------- | ---------------------------------------------------------------- | | `github` | `Bash(gh *)`, `Bash(hub *)` | | `stripe` | `Bash(stripe *)` | | `slack` | `Bash(slack *)` | | `openai` | `Bash(openai *)` | | `vercel` | `Bash(vercel *)` | | Any HTTP API template | `Bash(curl *)`, `Bash(wget *)`, `Bash(http *)`, `Bash(httpie *)` | | Any SQL template | `Bash(psql *)`, `Bash(mysql *)`, `Bash(sqlite3 *)` | | Any gRPC template | `Bash(grpcurl *)` | **Do NOT deny `Bash` entirely.** Earl's bash protocol and legitimate shell operations still need it. **Note on `Bash(curl *)` and `Bash(wget *)`:** Denying these also blocks all non-API curl uses — downloading binaries, health probes (`curl http://localhost:8080/health`), fetching install scripts, etc. If the agent legitimately needs curl for non-API tasks, add a narrow `allowedTools` override for those specific patterns, or use `earl call` instead for all HTTP operations. **Note on `Bash(gh *)`:** Denying `gh` also blocks all gh CLI uses that are not API calls: `gh pr create`, `gh release upload`, `gh repo clone`, branch management, etc. If the agent needs gh for repository operations that don't have Earl templates, add narrow exceptions or create templates for those commands before denying `Bash(gh *)`. --- ## Step 2: Generate and Present Denylist Based on the covered providers, generate the `deniedTools` array. Show it to the user before applying anything: > "Based on your Earl templates, I'd add these restrictions to `.claude/settings.json`: > > ```json > { > "deniedTools": [ > "Bash(curl *)", > "Bash(wget *)", > "Bash(gh *)", > "Bash(stripe *)" > ] > } > ``` > > This blocks the listed tools for this agent in this project. Other projects are unaffected. > Shall I apply this?" Do not apply until the user explicitly approves. --- ## Step 3: Apply Denylist For Claude Code: read `.claude/settings.json`, merge the `deniedTools` array (do not overwrite other keys), write it back. If `deniedTools` already exists, merge arrays — do not duplicate entries. --- ## Step 4: Verify **For Claude Code:** Attempt to run a denied command: ```bash curl https://example.com ``` Claude Code will refuse to run this command. The "tool denied" or "not allowed" error message from Claude Code **is the success signal** — it means the denylist is active. You cannot distinguish success from failure by looking at the exit code; look at whether Claude Code blocked it before the shell ran it. If Claude Code runs `curl` without blocking it, the `deniedTools` pattern syntax is wrong. Check the format against current Claude Code documentation (search "deniedTools settings" in the Claude Code docs or at https://docs.anthropic.com/en/docs/claude-code) — the exact pattern syntax may vary by version. Then re-apply with the corrected format. **For other platforms:** Ask the user to attempt a denied command manually in their agent session and confirm it is blocked. Test that Earl still works: ```bash earl templates list ``` Expected: succeeds and lists available templates (Earl is not in the denylist). --- ## Step 5: Configure Egress Rules (Strongly Recommended) Without egress rules, Earl is an open proxy — any HTTP template with a parameterized URL can reach any public endpoint. Add `[[network.allow]]` rules to `~/.config/earl/config.toml` (macOS/Linux) or `%APPDATA%\earl\config.toml` (Windows) to restrict which hosts Earl templates can contact. **Note:** Egress rules are global — they apply to all projects using this Earl install. Earl does not currently support per-project config files. For each provider template, add a rule: ```toml [[network.allow]] hosts = ["api.github.com"] [[network.allow]] hosts = ["api.stripe.com"] [[network.allow]] hosts = ["api.slack.com", "slack.com"] ``` **Security note on environments:** If any template uses `allow_environment_protocol_switching = true` in its annotations, an environment override can silently switch protocols (e.g. from HTTP to bash). Review templates with this annotation carefully — a staging environment that switches to bash bypasses the HTTP egress rules above. Prefer `vars.*` for environment differences (e.g. different base URLs) over full protocol switching where possible. After editing, verify: ```bash earl doctor ``` Earl doctor checks that the config is valid. Any `[[network.allow]]` parse errors will be reported. --- ## What This Does Not Cover - **Bash templates**: The `bash` protocol runs user-defined scripts in Earl's sandbox. The denylist does not restrict what Earl's own bash protocol can do. Ensure bash templates explicitly set `sandbox.network = false` unless network access is required. - **Agents without per-tool restriction**: For non-Claude-Code agents, the CLAUDE.md instruction is the only constraint. This is advisory, not enforced. - **Alternative interpreters**: Python, Node, Ruby, and other interpreters are not blocked by a curl-specific denylist. Pair with OS-level firewall rules for stronger containment. --- ## Next Steps - Earl is now the enforced channel for all covered API calls - To add egress rules for a new provider: add `[[network.allow]]` blocks to `~/.config/earl/config.toml` - If the agent is blocked from a call it needs: add an Earl template for that service, or remove the specific deny rule for that tool - If something breaks: invoke `troubleshoot-earl`