# Investigate > Investigate bugs — single-issue deep root cause analysis or batch parallel investigation from a report or issue list - Skill: `gitkraken/investigate` (Agent Skill) - Install (CLI): `npx skillmds@latest add gitkraken/investigate` - Raw SKILL.md: https://api.skillmd.com/api/skills/gitkraken/investigate/raw - Safety review: pending - Works with: Claude Code, Claude.ai, OpenAI Codex - Category: Docs & Writing - Author: gitkraken (https://skillmd.com/u/gitkraken) - Updated: 2026-09-17 - Page: https://skillmd.com/skills/gitkraken/investigate --- # /investigate - Bug Investigation Perform structured root cause analysis of bugs. Operates in two modes: single-issue deep investigation or batch parallel investigation across multiple issues. ## Pair with `/live-exercise` when the trace alone won't close the case This skill is the static-tracing layer: read code, form a hypothesis, point at a likely cause. **For many bugs that's enough — finish here.** But if the bug is reproducible in a running instance AND any of the following apply, **escalate to `/live-exercise` after the trace** to validate the theory, add temporary logging and observe it, or iterate fix → re-verify: - **Visible UI behavior**: flaky rendering, intermittent visual glitches, hover/focus/animation issues, layout overflow, "user clicks X and sometimes Y" - **Timing / event / race**: focus shifts, microtask vs task ordering, async chains, pointerdown→focusout→click sequences, debounced/throttled handlers - **Cross-component state**: cause spans multiple modules, contexts, or shadow DOM boundaries — the trace keeps fanning out without converging - **Theory needs empirical confirmation**: "I think the cause is X, but I'd have to read 8 more files to be sure" → faster to run the theory than to keep tracing - **Iterative debug loop expected**: add logging → repro → read logs → adjust hypothesis → repro again. Single-shot static investigation can't do this efficiently - **Bug surfaces only at runtime**: state-dependent, dataset-dependent, configuration-dependent — code looks correct but behaves wrong in the live instance **Pattern**: trace as far as the code alone takes you, identify the candidate cause(s), then hand off to `/live-exercise` to confirm or refute live. Don't skip the trace — but don't keep tracing past the point where running it would be cheaper. **Stay entirely here for**: pure-logic bugs, parser/algorithm correctness, build/config errors, well-isolated functions where the trace is short, or when no running instance is available. --- ## Usage ``` /investigate # Single deep investigation /investigate [number...] # Batch parallel investigation /investigate --from-report [path] [--verdict "..."] [--max 10] # Batch from triage report ``` - Single issue number or symptom — Deep investigation with full code tracing (runs in current agent) - Two or more issue numbers — Parallel investigation via subagents, produces report files - `--from-report` — Reads a triage decisions JSON. If path omitted, uses most recent `*-DECISIONS.json` in `.work/triage/reports/` (excluding `*-INVESTIGATION-DECISIONS.json`). - `--verdict` — Filter report to specific verdict(s). Defaults to `Valid - Needs Triage`. Comma-separated. Only applies with `--from-report`. - `--max` — Maximum parallel investigations. Defaults to 10. Only applies to batch mode. ## Mode Selection **Single mode** — invoked with one issue number or a symptom description. Performs a deep, thorough investigation in the current agent context. Best for focused debugging. **Batch mode** — invoked with 2+ issue numbers or `--from-report`. Spawns parallel subagents, each performing an independent investigation. Produces report files. Best for processing a queue of issues. --- ## Single Mode Instructions ### 1. Understand the Symptom - Restate the symptom to confirm understanding - Identify: extension host or webview? Node.js or browser? Which feature area? - Ask clarifying questions if ambiguous ### 1a. Relevance Assessment (for issues older than 1 year) If the issue is older than 1 year, perform a quick relevance check before the full investigation: 1. Identify the feature area, code paths, UI elements, settings, or commands mentioned in the issue 2. Check if the referenced files still exist using `Glob` or `Grep` 3. If they exist, check `git log --since="" -- ` for significant changes 4. If files have been deleted or substantially rewritten, include a **Relevance Assessment** in the output: ```markdown ### Relevance Assessment [One of: - "Code path still exists — issue may still be relevant" - "Code path no longer exists — [file(s)] deleted/removed since issue was filed" - "Feature area significantly refactored — [summary of changes since issue creation]" - "Unable to map issue to specific code paths — proceeding with investigation"] ``` If the code path no longer exists, note this prominently and consider whether the investigation should continue or if the issue should be recommended for closure. ### 2. Trace the Code Path - Find the entry point (command, event handler, IPC message) - Read every function in the call chain — do NOT assume behavior from names - For decorated methods, understand how the decorator alters behavior (see Decorator Reference below) - Read decorator source in `packages/utils/src/decorators/` if behavior is unclear ### 3. Form Hypotheses - List at least 2 possible root causes - For each, identify what evidence would confirm or refute it - Gather evidence by reading code, checking error types, tracing data flow ### 4. Audit Impact - Search for ALL call sites of functions you plan to modify - Check both `src/env/node/` and `src/env/browser/` paths - Check per-operation git providers: `packages/git/src/providers/` and `packages/git-cli/src/providers/` ### 5. Assess Source Attribution Before presenting findings, assess where the diagnosis came from: - **Independent analysis** — Root cause was determined primarily by tracing code paths, reading implementations, and forming hypotheses from code evidence. The issue description described symptoms but did not point to the cause. - **Confirmed reporter's diagnosis** — The issue already contained detailed code references, file paths, or a proposed root cause. The investigation verified these claims against the current code but did not independently discover the cause. Be honest about this. Both are valuable — confirming a reporter's analysis is useful — but the reader should know what the investigation actually contributed. ### 6. Present Findings ```markdown ## Investigation: [Symptom] ### Symptom [What goes wrong] ### Source Attribution [One of: "Independent analysis from code tracing" | "Confirms reporter's diagnosis — the issue included [specific detail: code references / file paths / root cause hypothesis] which this investigation verified against current code" | "Mixed — [explain what came from the issue vs. independent tracing]"] ### Code Path [Entry point] -> [Function 1] -> [Function 2 (@gate)] -> [Function 3] ### Root Cause [Cause with file:line evidence] ### Alternative Causes Considered 1. [Alternative] — ruled out because [evidence] ### Proposed Fix [Minimal change to address root cause] ### Impact - Files to modify: [list] - Call sites checked: [count] - Platform paths verified: Node.js [yes/no], Browser [yes/no] ``` ### 7. Get Confirmation Present findings and proposed fix. Wait for user confirmation before implementing. --- ## Batch Mode Instructions ### Stage 0 — Load and Filter Issues **Direct mode (2+ issue numbers):** Use the provided issue numbers directly. Proceed to Stage 1. **From-report mode (`--from-report`):** 1. Read the decisions JSON file specified (or find the most recent `*-DECISIONS.json` in `.work/triage/reports/`, excluding `*-INVESTIGATION-DECISIONS.json`) 2. Filter verdicts to only those matching the `--verdict` filter AND where the issue is a bug (check `recommendedLabels` or the corresponding markdown report for type info) 3. If no matching issues are found, report that and stop 4. If more issues match than `--max`, take the first N and note how many were skipped ### Stage 1 — Fetch Issue Context For each qualifying issue, use the GitHub CLI to fetch the full issue body and comments: ```bash gh issue view --repo --json title,body,comments,labels,state,author,createdAt,updatedAt ``` The repo slug comes from the decisions JSON's corresponding evidence pack, or default to `gitkraken/vscode-gitlens`. ### Stage 2 — Spawn Investigation Subagents For each issue, spawn a subagent (using the Agent tool) with: - `subagent_type`: general-purpose - A prompt that includes: 1. The issue number, title, body, and comments (formatted for readability) 2. The labels and any existing evidence summary from the triage verdict 3. Instructions to follow the single-mode investigation methodology: - Understand the symptom from the issue description - Trace the relevant code path in the codebase - Form at least 2 hypotheses - Gather evidence by reading code - Assess source attribution: was the root cause found independently via code tracing, or was it confirming analysis already present in the issue? - Estimate effort (Small/Medium/Large) and risk (Low/Medium/High) based on the scope of the fix - Present findings in the investigation format 4. A critical instruction: **If there is not enough information in the issue to form a meaningful hypothesis, or if the investigation yields only low-confidence results, state that clearly and do not force a conclusion.** It is perfectly acceptable to report "insufficient information to investigate" or "investigation inconclusive". 5. The subagent should write its findings to stdout (not to files) — you will collect the results Run subagents in parallel where possible. Each subagent operates independently. ### Stage 3 — Collect and Report Gather all subagent results and produce report files: **File**: `.work/triage/reports/YYYY-MM-DD-INVESTIGATION-REPORT.md` ```markdown # Investigation Report — YYYY-MM-DD Source: Issues investigated: N Issues with findings: N Issues inconclusive: N --- ## Findings ### [#NNNN — Title](https://github.com///issues/NNNN) - **Author**: @username (team) | @username - **Triage verdict**: - **Investigation result**: Confirmed Bug | Likely Fixed | Cannot Reproduce from Description | Inconclusive | Insufficient Information - **Confidence**: High | Medium | Low - **Source attribution**: Independent analysis | Confirms reporter's diagnosis | Mixed - **Estimated effort**: Small (hours) | Medium (1-3 days) | Large (3+ days) | Unknown - **Risk level**: Low | Medium | High | Unknown #### Symptom #### Code Path -> #### Root Cause Analysis #### Alternative Causes Considered 1. — ruled out because #### Recommendation --- ## Inconclusive Issues Issues where investigation could not reach a meaningful conclusion: - [#NNNN — Title](https://github.com///issues/NNNN) — --- ## Classification Matrix Buckets confirmed/likely bugs by estimated effort and risk to aid prioritization: | Issue | Effort | Risk | Summary | | ----- | ------ | ---- | ----------------------------- | | #NNNN | Small | Low | | | #NNNN | Medium | High | | **Effort guide**: Small = isolated change, hours of work; Medium = multiple files/systems, 1-3 days; Large = architectural or cross-cutting, 3+ days. **Risk guide**: Low = safe, localized change; Medium = touches shared code or has edge cases; High = could regress other features or affects critical paths. ### Quick Wins (Small effort, Low/Medium risk) - #NNNN — ### Needs Planning (Medium/Large effort or High risk) - #NNNN — <title> — <why it needs planning> --- ## Summary - **Confirmed bugs**: N (list issue numbers) - **Likely already fixed**: N (list issue numbers) - **Inconclusive**: N (list issue numbers) - **Skipped (over max)**: N ``` Write the markdown file and report its path to the user. #### Machine-Readable JSON Also produce a machine-readable companion file: `.work/triage/reports/YYYY-MM-DD-INVESTIGATION-DECISIONS.json` ```json { "reportId": "<uuid>", "sourceDecisionsFile": "<path to triage decisions that triggered this, or null for direct mode>", "generatedAt": "<ISO timestamp>", "investigations": [ { "issueNumber": 1234, "result": "Confirmed Bug | Likely Fixed | Cannot Reproduce | Inconclusive | Insufficient Information", "confidence": "High | Medium | Low", "sourceAttribution": "Independent | Confirms Reporter | Mixed", "estimatedEffort": "Small | Medium | Large | Unknown", "riskLevel": "Low | Medium | High | Unknown", "rootCauseSummary": "...", "proposedFix": "...", "affectedFiles": ["src/path/to/file.ts"], "blockedBy": null | "vscode" | "git" | "cli" | "language-server" | "other", "blockedDetail": "...", "recommendation": "Fix | Request Info | Close | Needs Planning | Blocked" } ] } ``` Generate a UUID for `reportId`. Write both files and confirm their paths to the user. --- ## Important Notes - Batch mode is intentionally expensive — each subagent performs a full code investigation. The user has opted in to this cost. - Do NOT skip the investigation for an issue just because it seems complex. Let the subagent try and report what it finds. - DO skip issues that are clearly feature requests mislabeled as bugs — note these in the report. - Subagent failures (timeouts, errors) should be noted in the report, not silently dropped. - If a subagent finds that a bug has already been fixed (e.g., the code path no longer has the described behavior), report that as "Likely Fixed" — this is valuable triage signal. ## Anti-Patterns - Do NOT start implementing before completing the investigation - Do NOT blame logging decorators for hangs — check `@gate()` first - Do NOT propose disabling/removing a feature when asked to fix it - Do NOT suppress errors — fix the root cause or propagate properly ### Common Misdiagnosis Patterns to Avoid 1. **Blaming logging decorators for hangs**: When a method hangs, the issue is almost never in `@info()`/`@debug()`/`@trace()`. Check `@gate()` (promise never resolving) or the actual async operation first. 2. **Confusing `@gate()` and `@sequentialize()`**: `@gate()` returns the SAME promise to concurrent callers. `@sequentialize()` QUEUES calls. These solve different problems. 3. **Wrong error type handling**: Use the error's `.is()` static method with reason discriminator: `PushError.is(ex, 'noUpstream')`, not `instanceof` + `ex.message.includes(...)`. 4. **Platform-specific bugs**: Something working in Node.js may fail in browser (and vice versa). Always check the `@env/` abstraction layer. 5. **Scope/context bugs**: `getScopedLogger()` returns stale scope after `await` in browser. Capture the scope before the first `await`. 6. **Suppressing errors instead of fixing them**: Do NOT silence errors by catching and ignoring them. Fix the root cause or propagate them properly (e.g., use `errors: throw` so catch blocks handle them). ## Chaining This skill can be used standalone or as part of the issue workflow pipeline: ``` /triage recent → /investigate --from-report → /prioritize --from-report → /update-issues /triage 5096 → /investigate 5096 → /prioritize 5096 → /update-issues /investigate 5096 5084 (standalone batch) /investigate #5096 (standalone single) ``` Upstream: `--from-report` consumes triage decisions JSON from `/triage`. Downstream: `/prioritize --from-report` consumes the investigation decisions JSON. `/update-issues` can also consume it directly. ## Decorator Reference See `AGENTS.md` § Decorator System for the behavior table, gotchas, and stacking order. Read the decorator source in `packages/utils/src/decorators/` when behavior is unclear — options like gate grouping keys/deadlock detection, memoize version-keyed invalidation, and sequentialize queue keys often matter during investigation. **Debugging priority:** 1. `@gate()` — hangs, timeouts, deadlocks (check for circular waits: a nested gated call waiting on the outer gate) 2. `@memoize()` — stale data, cached rejections (no TTL; rejected Promises stay cached) 3. Logging decorators — rarely the cause