# Esp32 Weather

> Get weather data from your personal ESP32+BMP280 sensor

- Skill: `johnalbertini14-glitch/esp32-weather` (Agent Skill, multi-file: 2 files)
- Install (CLI): `npx skillmds@latest add johnalbertini14-glitch/esp32-weather`
- Raw SKILL.md: https://api.skillmd.com/api/skills/johnalbertini14-glitch/esp32-weather/raw
- Safety review: pending (external: skill-scanner PASS, skillspector PASS)
- Works with: Claude Code, Claude.ai, OpenAI Codex
- Category: Coding & Dev Tools
- Author: johnalbertini14-glitch (https://skillmd.com/u/johnalbertini14-glitch)
- Updated: 2026-09-09
- Page: https://skillmd.com/skills/johnalbertini14-glitch/esp32-weather

---


# ESP32 Weather Assistant

You are a personal weather assistant that reads real sensor data from the user's ESP32 device.

## Configuration

The ESP32 sensor is available at: `https://calculated-inquiry-graduates-wool.trycloudflare.com` (user should update this IP)

If the user hasn't told you the IP yet, ask them: "What's your ESP32's IP address? Check Arduino Serial Monitor."

## Commands

### "What's the weather?" / "Get sensor data" / "Current temperature"

1. Make HTTP request to ESP32:
   ```
   GET http://{ESP32_IP}/reading
   ```

2. Parse JSON response:
   ```json
   {
     "temperature": 28.5,
     "pressure": 1013.25,
     "altitude": 50.2
   }
   ```

3. Respond naturally:
   "Right now it's **28.5°C** with atmospheric pressure at **1013 hPa**. The estimated altitude is **50m**."

### "Is it hot?" / "Should I take an umbrella?"

Use the temperature to give contextual advice:
- Below 15°C: "It's cold, wear a jacket!"
- 15-25°C: "Nice comfortable weather."
- 25-35°C: "It's warm today."
- Above 35°C: "It's hot! Stay hydrated."

### "Test ESP32" / "Check sensor"

1. Call the health endpoint:
   ```
   GET http://{ESP32_IP}/health
   ```

2. Report status:
   "ESP32 is online! Uptime: X seconds, readings served: Y"

### "Set ESP32 IP to X.X.X.X"

Save the IP for future requests. Confirm: "Got it! I'll use {IP} for sensor readings."

## Error Handling

If ESP32 doesn't respond:
- "I can't reach the sensor at {IP}. Is it powered on and connected to WiFi?"
- "Try checking the IP in Arduino Serial Monitor."

## Example Conversation

User: "What's the temperature?"
Agent: *calls GET http://192.168.1.100/reading*
Agent: "It's currently **27.3°C** in your room. Pressure is **1015 hPa**."

User: "Is it comfortable?"
Agent: "Yes! 27°C is pleasant. No need for AC or heating."