# Stripe Projects CLI

> Use the Stripe Projects CLI in this repository to manage deploying and access to third party services.

- Skill: `kernel/stripe-projects-cli` (Agent Skill)
- Install (CLI): `npx skillmds@latest add kernel/stripe-projects-cli`
- Raw SKILL.md: https://api.skillmd.com/api/skills/kernel/stripe-projects-cli/raw
- Safety review: pending
- Works with: Claude Code, Claude.ai, OpenAI Codex
- Category: Integrations & APIs
- Author: kernel (https://skillmd.com/u/kernel)
- Updated: 2026-09-17
- Page: https://skillmd.com/skills/kernel/stripe-projects-cli

---


# Stripe Projects CLI

This repository is initialized for the Stripe project "2026-06-11-justhtml".

# Workflow
0. Run `stripe projects llm-context` to get the LLM context for the project.
1. Start with `stripe projects status` or `stripe projects show` to inspect the current project, linked providers, and named resources.
2. Use `stripe projects catalog` or `stripe projects services` to browse available providers and services. When you know the provider, run `stripe projects catalog <provider> --json` or `stripe projects catalog <provider>` and copy the exact `<provider>/<service>` slug from the output.
3. Provision a resource with `stripe projects add <provider>/<service>`. Do not guess the `stripe projects add` argument. Run `stripe projects catalog <provider> --json` or `stripe projects catalog <provider>` and copy the exact `<provider>/<service>` slug before you run `stripe projects add`. Example: `stripe projects add databaseco/postgres --name primary-db`. Use `--name <resource>` to control the local resource name used by future resource commands and environment variable prefixes. If you omit `--name`, the CLI uses the provider/service default for the local resource name. When a service config field looks like a name, the CLI uses the current project name as the default value when that satisfies the field schema. Use `--config '<json>'` when the service requires configuration.
4. Review credentials with `stripe projects env`. Values are redacted by default, and you can use `stripe projects env --pull` to write them to local files. If named project environment commands are available, `stripe projects env --pull` writes credentials for the active environment to that environment's output file.
5. After a successful `stripe projects add`, summarize the result and suggest next steps:

   | Field | Value |
   |-------|-------|
   | Provider | `<provider name>` |
   | Service | `<service type>` |
   | Tier | `<tier>` |
   | Env vars | `<variable names only — never values>` |

   Then show a compact summary of the other services already provisioned on the project (from `stripe projects status`):

   **Already on this project:**

   | Provider | Service | Env var prefix |
   |----------|---------|----------------|
   | ProviderA | service-name (Tier) | `PREFIX_*` |
   | ProviderB | service-name (Tier) | `PREFIX_*` |

   Then suggest 3–5 complementary services from different categories in the catalog (e.g., if user added a database, suggest auth, hosting, or observability). Only reference services that actually appear in `stripe projects catalog --json` output — never fabricate commands or provider names. Use this human-friendly format without CLI commands or provider/service slugs:

   1. ProviderName (category) — short description of what it provides
6. For named environments, use `stripe projects env list` to see all environments and the active `*`, `stripe projects env create <environment> --output .env.<environment>` to create one, and `stripe projects env use <environment>` to switch the active environment.
7. Use `stripe projects env add <resource>` and `stripe projects env remove <resource>` to change resource membership for the active environment only.

## Optional notes
* If necessary, you can also link a provider with `stripe projects link <provider>` directly. But `stripe projects add <provider>/<service>` will guide you through provider authentication when needed.

# Working Agreement
- Commands can be run from the project root or nested directories inside the project.
- Do not hand-edit CLI-managed files under `.projects` or the generated `.env` output.
- NEVER look at any files in the .projects directory. The CLI manages everything for you.
- NEVER look at `.env`. The CLI manages everything for you.

# Agent mode
- You can use the `--json` flag when structured output will make follow-up steps easier.
- When you need to build a provisioning command programmatically, prefer `stripe projects catalog <provider> --json` so you can copy the exact `<provider>/<service>` slug without guessing.
- Use `--non-interactive` to disable prompts across commands. When you do, pass fully specified arguments and companion flags like `--yes` or `--accept-tos` when the command requires confirmation.

# Full command reference
- `stripe projects status` — view project, providers, and services
- `stripe projects catalog [provider]` — browse available services (optionally for one provider) and copy exact `provider/service` slugs
- `stripe projects add <provider>/<service>` — provision a service
- `stripe projects add databaseco/postgres --name primary-db` — example add command you can copy and adapt
    - `--name <resource>` — custom local resource name for future commands and env var prefixes
    - `--config '<json>'` — service configuration that can be passed with `projects add`
    - `--provider-config '<json>'` — provider link configuration (e.g. region)
    - `--force-provider-relink` — force a fresh provider link request during `add`
- `stripe projects add @database` — browse services by category (interactive only)
- `stripe projects remove <resource>` — remove a provisioned resource
- `stripe projects rotate <resource>` — rotate credentials for a resource
- `stripe projects upgrade <resource>` — change a resource's service tier
- `stripe projects open <provider>` — open provider dashboard in browser
- `stripe projects link <provider>` — link/re-link a provider
- `stripe projects link <provider> --force` — force a fresh provider re-link request
- `stripe projects env` — list credentials (redacted)
- `stripe projects env --pull` — fetch credentials and write them to `.env`
- `stripe projects env list` — list named project environments and mark the active one with `*`
- `stripe projects env show` — show the active project environment
- `stripe projects env create <environment> --output .env.<environment>` — create a named environment and make it active
- `stripe projects env use <environment>` — switch the active project environment
- `stripe projects env add <resource>` — add an existing resource to the active environment
- `stripe projects env remove <resource>` — remove resource membership from the active environment
- `stripe projects llm-context` — get provider-specific LLM guidance
- `stripe projects billing show` — view billing method
- `stripe projects billing add` — add or update billing method
- `stripe projects spend` — view charges on your account

# Companion plan services
Some deployable services require a companion **plan** service to be provisioned first (controls pricing tier/resource limits).

## Checking existing plans
Run `stripe projects status` to see provisioned plans. If the required plan is already active, no action needed — proceed directly with the deployable.

## Provisioning order
When adding a deployable that has component pricing and no plan is yet provisioned:
1. Identify the required plan via `stripe projects catalog <provider> --json` — look for plan-kind services that are parents of the target deployable.
2. Provision the plan: `stripe projects add <provider>/<plan-service> --non-interactive --yes`
3. Provision the deployable: `stripe projects add <provider>/<deployable> --non-interactive --yes`

The plan must be provisioned before the deployable. If you skip it, the `add` command will fail in non-interactive mode.

# Billing
If you need to deploy paid services, use `stripe projects billing add` to configure payment, or `stripe projects billing show` to view your current method.

# Deployment
If you get asked to deploy your project, copy the following files to the remote host into the project root:
* .env
* .projects/state.json
* .projects/state.local.json

Deploying a project might require to provision a provider that offers compute or hosting, and you may need to download their CLI.

# Troubleshooting
- If a command fails, run `stripe projects status --json` to understand the current state.
- If a provider shows status `PENDING_AUTH` or `EXPIRED`, run `stripe projects link <provider>` to re-authenticate. Add `--force` if you need a fresh re-link request regardless of local state.
- If credentials seem stale, run `stripe projects rotate <resource>` then `stripe projects env --pull`.