# Mutation Test > Proves a test actually checks something, by breaking the behaviour it claims to cover and confirming it goes red. Use when a test, fixture, assertion or guard has been reported as working and you want evidence rather than a green run, or to check a claim that some code is dead, unused or unreachable. Triggers on "mutation test", "mutation testing", "prove it fails", "are these tests real", "does this test actually assert anything", "is that assertion live", "did you verify it's not vacuous", "how do you know it's checking anything", or any claim that a test passes being offered as evidence the behaviour is correct. Also use it proactively before reporting harness or fixture work as done. - Skill: `lunarcommand/mutation-test` (Agent Skill, multi-file: 3 files) - Install (CLI): `npx skillmds@latest add lunarcommand/mutation-test` - Raw SKILL.md: https://api.skillmd.com/api/skills/lunarcommand/mutation-test/raw - Safety review: pending - Works with: Claude Code, Claude.ai, OpenAI Codex - Category: Coding & Dev Tools - Author: LunarCommand (https://skillmd.com/u/lunarcommand) - Updated: 2026-09-17 - Page: https://skillmd.com/skills/lunarcommand/mutation-test --- # Mutation testing A green test run is the **null result**, not evidence. A dead assertion and a live one produce identical output, so "it passed" discriminates nothing. This skill establishes the one thing that does discriminate: **break the behaviour and watch it go red.** Work is not done when it passes. It is done when it has been seen to fail for the right reason. ## Scope, and what this version does not do This version runs **one claim at a time, by hand**. There is no batch runner, no coverage map, and no scripted scope resolution — see [Not in this version](#not-in-this-version). If you were handed a PR or a diff and asked whether it is pinned by its suite, say so plainly and pick the claims worth checking individually rather than implying a sweep happened. ## Rules - **Break the source, never the test.** Mutating the test proves only that the test tests itself. - **Never mutate test files.** - **Copy the file before you touch it, and restore from that copy.** Not from git. The files this skill is pointed at are usually the ones just written, so they hold uncommitted work — `git checkout`, `git restore` and `git stash` destroy it rather than restoring it. `cp .mtbak`, mutate, then `mv` it back. - **Mutate the file where the tests actually load it from — in place.** The tempting shortcut is to mutate a copy instead, so the real tree stays clean: a `git worktree`, a scratch checkout, a second clone. By default that does not work, and it fails silently. A Python editable install records an *absolute* path to the original source; configured source roots, prebuilt artifacts and installed packages behave the same way. The tests go on importing the file you did not touch, so every mutant passes — which is indistinguishable from a real coverage gap, and reads as "nothing covers this line" when the truth is "nothing ran your change". This is what makes the backup rule above load-bearing rather than merely tidy, and it is why this skill mutates in place instead of somewhere clean. If you use an isolated tree anyway, **do not try to prove the wiring with a probe first.** Three designs tried and each was defeated: breaking the syntax shows only that *something read* the file, a lint step objects while the judging step never runs; emptying it is no better, a type checker notices the symbol is gone without executing anything; appending a fatal statement is caught by a formatter reacting to the added bytes, and in Go, Rust or Java there is no legal top-level fatal statement to append at all. Every one of them measures the same thing — does the command react to these bytes changing — which any step that merely reads the file satisfies. Judge it from the results instead, where the signal is honest: **mutate several independent lines, and if every single mutant survives, suspect the environment before believing the coverage.** That cannot be fooled by a linter, needs no knowledge of the language, and costs nothing, because you were running the mutants anyway. - **Never overwrite an existing backup.** If `.mtbak` is already there when you go to make one, a previous run was interrupted: that file is the only pristine copy left and the working file is probably still mutated. Recover from it, verify with `cmp`, delete it, and start again. Copying over it destroys the original permanently — the same way a colliding backup key destroyed one in the batch runner this version withholds. - **Verify the restore by content, not by `git status`.** On an already-dirty file `git status` says "modified" before and after the mutation and `git diff` shows a diff either way, so neither can tell a restored file from a still-mutated one. Use `cmp .mtbak` — or a checksum taken before the mutation — and delete the copy only once it matches. - **A survivor is a coverage gap, not a bug.** The code is usually correct as written. The finding is that a future edit could change behaviour with the suite still green. - **Do not write the test that closes the gap** unless asked. Report, then stop — see [Why this reports and does not fix](#why-this-reports-and-does-not-fix). - **When the same class keeps recurring, stop mutating and build a guard.** See [Retire the class](#retire-the-class). ## The procedure For each claim under test, one at a time. ### 1. Name the claim precisely Not "fixture 147 passes" but "fixture 147 asserts that a null `prompt_tokens` reaches no span attribute". A claim you cannot state in one sentence cannot be mutation-tested, because you do not know what to break. ### 2. Take a copy, then choose the mutation Copy first — that copy is the only thing standing between a mutation and lost work. Check it does not already exist before you write it: `[[ -e .mtbak ]]` means a previous run was interrupted and left the original there, so recover from it before doing anything else. Never copy over it. Then prefer the smallest mutation that violates the claim and nothing else. If the claim is "X is absent when Y", make X present when Y. If it is a pair of opposite claims (X true here, false there), you need **both directions**: a one-way mutation can only ever kill one of them, and the survivor is not evidence of anything. Good targets, in rough order of value: - **Boundaries** — `>=`↔`>`, `<`↔`<=`, off-by-one on an index or floor - **Decision constants** — a timeout, threshold, retry count. Change to a different *plausible* value, not to garbage - **Sentinels and defaults** — `None`↔`{}`, a fail-closed default flipped open - **Operators** — `and`↔`or`, a dropped negation - **Deleted stores** — remove a write, see if any test observes it - **Error paths** — swallow a raise, drop a rollback, skip a cleanup ### 3. Run the test unmodified — confirm it is green Before touching anything, run the test that claims to cover the behaviour. If it is already failing, **stop and say so.** A red starting point makes the whole exercise unable to answer the question: the test fails identically with and without the mutation, so "it went red" is not evidence the mutation caused it, and a dead assertion is indistinguishable from a live one. Knowing the test was green beforehand is what licenses the inference. Discovering it afterwards means running the whole thing again. ### 4. Apply the mutation, and confirm it landed — before running anything This is the step that is skipped, and skipping it produces false "survivors". Read the mutated line back. A find/replace that matched nothing, matched in the wrong place, or matched inside a comment leaves the behaviour intact, and the green run that follows means nothing at all. ### 5. Run, and read the failure message Not just that it went red — *why*. A test that fails with an import error or a fixture error when you expected an assertion failure did not exercise the claim; it broke on the way there. ### 6. Restore, and verify by content `cp .mtbak ` — copy rather than move, so the backup survives a failed restore — then `cmp .mtbak`. Delete the backup **only** once they match. If `cmp` disagrees, leave it in place and say so: it is still the only pristine copy, and removing it on the way past is how the original gets lost. Do this before reporting anything, not after. A stray mutation left behind is worse than every finding is good. ### 7. Report the two claims separately "The mutation landed" and "the test caught it" are different findings. Say both. A reader cannot tell a live assertion from a skipped step otherwise. ## What a survivor means A mutation that leaves the suite green means one of: - **The assertion is dead** — it exists but is not pointed at anything. - **The mutation did not land** — check step 4 again before concluding anything. - **The mutation was not a violation** — you broke something the claim does not actually cover. Sharpen the claim or the mutation. - **The claim is a negative control** — it fails only for a non-conforming implementation, so no conforming mutation kills it. Legitimate, but say so explicitly rather than leaving it looking verified. - **The fixtures derive from the mutated value** — mutating a constant moves both sides together. Usually correct and refactor-safe, not a defect. Rule out the middle three before reporting the first. ## Why this reports and does not fix The report is the artifact. Closing a gap is a separate decision, taken with the report in hand — the same split as `pr-review` and `adversarial-review`. The reason is not just workflow tidiness. **A test written to kill a mutant tends to test the mutant rather than the behaviour.** Handed `>= → >` and told "make this fail", the path of least resistance is to assert on the exact boundary value, which pins an implementation detail and makes the threshold harder to tune later. You get a green suite that is no more correct and more expensive to change. Deciding what a survivor *means* needs judgement the mutation cannot supply: - Most survivors on a constant happen because the tests derive their fixtures FROM that constant, so mutating it moves both sides together. That is usually correct and refactor-safe, not a defect. - Pinning the literal (`assert WINDOW == 60.0`) closes the mutant and buys nothing — a pure change-detector that fails on every legitimate retune. - The useful test states the *operational* claim in absolute terms ("two minutes of silence means the endpoint recovered"), which kills a 60→600 mutation while surviving a 60→90 retune. Those three look identical from a survivor list. Only a human reading the code can tell them apart, so report, then stop. ## Retire the class If the same class of defect keeps appearing, a mutation run per instance is the wrong tool. Prefer a **structural guard** that makes the class impossible: enumerate what each consumer actually reads and fail when something declares a key nobody reads. That retires the class instead of re-detecting it, and it keeps working when nobody remembers to run this skill. ## Claim checking For "this code is dead / unused / can be removed", the same method answers it. Delete the thing — from a copy, per the rules above — run the tests it plausibly touches, and report what broke. A claim that survives deletion is probably right; one that kills two tests is answered, and the reply writes itself. This is the only way to disagree with a static-analysis finding on evidence rather than assertion. ## Highest-risk signal **A test that passes the moment you wire it, with no other work**, is the most likely to be vacuous — not the easiest win. Treat an immediate pass as a reason to mutate, not a reason to move on. ## Why this skill prompts for permission `mutation_test_worktree.sh` deliberately ships **without** a permission rule, so it asks before it runs. That is not unfinished setup, and adding a rule for it is not the fix. Its `--setup` and `--test` arguments are handed to `bash -c` verbatim. Any rule that lets the script run unprompted approves the *wrapper*, not the payload — so an agent that assembled a test command from a repository's README or CI config could run it with no prompt at all. The script is invoked once per mutation session rather than once per file, so the cost is a single prompt showing the exact command that will execute. ## The isolation layer: `mutation_test_worktree.sh` This skill ships one script. **The manual procedure above does not use it** — that mutates in place, which is the whole point of the in-place rule. The script is for the case where you genuinely need an isolated tree, and it is the foundation the scoped runs below will be built on. ``` mutation_test_worktree.sh run --test [--setup ] [--repo ] [--ref ] [--keep] -- ... ``` It creates a throwaway `git worktree`, runs your command inside it, and removes it. The worktree's path never leaves the script; your command sees it as the working directory and in `$MUTATION_TEST_WORKTREE`, and its exit status is passed through unchanged. Before your command runs it establishes three things, all of them directly observed: 1. the repository has no uncommitted or untracked changes, so the checkout matches what you are looking at — a worktree holds committed work only 2. a `--setup` command you named ran successfully in it 3. `--test` exits 0 in it, so the baseline is green **What it deliberately does NOT establish** is that `--test` can see a mutation at all. Nothing exit-code-shaped can: three designs tried and each was defeated by a step that reads a file without executing it. Judge that from your results — if every mutant survives, suspect the environment. It says so on success rather than implying more. It refuses rather than guessing, and every refusal prints a machine-readable `mutation_test_worktree: refused: ` line before exiting. It asks for permission on every run, deliberately — see [Why this skill prompts for permission](#why-this-skill-prompts-for-permission). ## Not in this version Scoped runs — point it at a PR or a diff, resolve changed lines, build a line-to-test coverage map, and run a batch of mutants — are **not shipped here**. The isolation layer they need is (above); the runner on top of it is not. Until it lands: for a diff, pick the two or three claims that actually carry risk and run them by hand. That is slower per line and better per finding — ten chosen mutants beat a hundred generated ones anyway. Tracked as issue #13. The approach changed while that issue was open, and the reason is worth carrying: the first runner mutated your files and restored them, and every blocker an adversarial review found in it lived in that backup-and- restore path — including a key that was not injective, so one file's contents were written over another's while the run printed success. A runner that never writes to your tree cannot have them. **What a batch runner has to prove before it ships.** These criteria changed once the design did, and it is worth saying how. The withheld runner mutated your files and restored them, so its whole product was the restore path: it had to survive a fixture tree built to break it — two paths colliding under whatever key the backup used (`a/b.py` alongside `a_b.py` defeated `tr '/' '_'`), a path with a space, a symlink, a file named after the runner's own scratch file, two runs at once. A runner built on `mutation_test_worktree.sh` has no restore path, because it never writes to your tree at all. Those cases stop being the bar and become true by construction — which is exactly the kind of claim this project has been wrong about before, so the suite still asserts the source tree is byte-identical afterwards rather than assuming it. Any scratch file the runner writes itself is back in scope, in the worktree, and the hostile-name cases apply there. The bar that replaces round-trip integrity is **detecting a mis-wired environment**. The worktree layer deliberately does not establish that the test command can see a mutation — nothing exit-code-shaped can. The runner is the only component that can, because it holds the whole result set: if it mutates several independent lines and *every* mutant survives, it must say so loudly rather than reporting a coverage gap. Getting that wrong reproduces the exact symptom this skill exists to prevent — a confident, entirely false clean run.