# Firewall Configuration

> Configure UFW (Uncomplicated Firewall) on Ubuntu/Debian VPS servers to restrict network access and minimize attack surface by controlling inbound and outbound traffic.

- Skill: `mikr13/firewall-configuration` (Agent Skill, multi-file: 3 files)
- Install (CLI): `npx skillmds@latest add mikr13/firewall-configuration`
- Raw SKILL.md: https://api.skillmd.com/api/skills/mikr13/firewall-configuration/raw
- Safety review: pending (external: skill-scanner PASS, skillspector PASS)
- Works with: Claude Code, Claude.ai, OpenAI Codex
- Category: Coding & Dev Tools
- License: MIT
- Author: mikr13 (https://skillmd.com/u/mikr13)
- Updated: 2026-09-10
- Page: https://skillmd.com/skills/mikr13/firewall-configuration

---


# Firewall Configuration Skill

Configure UFW firewall to control network traffic and minimize attack surface on VPS servers.

## What This Skill Does

This skill helps AI agents configure UFW (Uncomplicated Firewall) on Ubuntu/Debian servers. Without a firewall, every port is potentially accessible to the internet. A properly configured firewall creates a security perimeter that only allows necessary traffic.

**Key capabilities:**

- Install and enable UFW firewall
- Set secure default policies (deny incoming, allow outgoing)
- Open specific ports for required services
- Configure application-specific rules
- Manage firewall rules and verify configuration
- Handle IPv4 and IPv6 traffic

## When to Use

Use this skill when you need to:

- Set up a new VPS server with network security
- Restrict network access to only required services
- Implement defense in depth security
- Fix security audit findings related to open ports
- Comply with security best practices
- Protect services from unauthorized access

**Critical understanding:** Every open port is attack surface. Only open ports for services you're actually running.

## Prerequisites

- Root or sudo access to the server
- Ubuntu or Debian-based Linux distribution
- Active SSH session (firewall must allow SSH before enabling!)
- Knowledge of which services/ports you need open

## Firewall Setup Steps

### Step 1: Install UFW

UFW is usually pre-installed on Ubuntu. Install if missing:

```bash
sudo apt update
sudo apt install ufw -y
```

### Step 2: Set Default Policies

**CRITICAL:** Set these BEFORE enabling the firewall!

```bash
# Deny all incoming traffic by default
sudo ufw default deny incoming

# Allow all outgoing traffic by default
sudo ufw default allow outgoing
```

This creates a "whitelist" approach - nothing gets in unless explicitly allowed.

### Step 3: Allow SSH (CRITICAL!)

**WARNING:** You must allow SSH before enabling UFW, or you'll lock yourself out!

```bash
sudo ufw allow ssh
```

Or specify the port number explicitly:

```bash
sudo ufw allow 22/tcp
```

If you changed SSH to a custom port (e.g., 2222):

```bash
sudo ufw allow 2222/tcp
```

### Step 4: Allow Required Services

Add rules for services you're actually running:

**Web Server (HTTP/HTTPS):**

```bash
sudo ufw allow 80/tcp   # HTTP
sudo ufw allow 443/tcp  # HTTPS
```

Or use application profiles:

```bash
sudo ufw allow 'Nginx Full'
# or
sudo ufw allow 'Apache Full'
```

**Common services:**

```bash
# FTP
sudo ufw allow 21/tcp

# MySQL (only if remote access needed)
sudo ufw allow 3306/tcp

# PostgreSQL (only if remote access needed)
sudo ufw allow 5432/tcp

# SMTP
sudo ufw allow 25/tcp

# DNS
sudo ufw allow 53

# Custom application
sudo ufw allow 8080/tcp
```

### Step 5: Enable UFW

**After** confirming SSH is allowed:

```bash
sudo ufw enable
```

Confirm when prompted. The firewall is now active.

### Step 6: Verify Configuration

Check firewall status and rules:

```bash
sudo ufw status verbose
```

Expected output:

```
Status: active
Logging: on (low)
Default: deny (incoming), allow (outgoing), disabled (routed)
New profiles: skip

To                         Action      From
--                         ------      ----
22/tcp                     ALLOW IN    Anywhere
80/tcp                     ALLOW IN    Anywhere
443/tcp                    ALLOW IN    Anywhere
```

## Advanced Firewall Configuration

### Allow from Specific IPs

Restrict access to specific IP addresses:

```bash
# Allow SSH only from specific IP
sudo ufw allow from 203.0.113.10 to any port 22

# Allow MySQL only from application server
sudo ufw allow from 203.0.113.20 to any port 3306

# Allow entire subnet
sudo ufw allow from 192.168.1.0/24
```

### Deny Specific IPs

Block malicious IPs:

```bash
sudo ufw deny from 203.0.113.100
```

### Port Ranges

Open a range of ports:

```bash
sudo ufw allow 6000:6007/tcp
```

### Limit Connections (Rate Limiting)

Protect against brute-force attacks:

```bash
# Limit SSH connections (max 6 in 30 seconds)
sudo ufw limit 22/tcp
```

This works well for SSH but fail2ban is better for comprehensive protection.

### Delete Rules

Remove a firewall rule:

```bash
# By rule number (get number from 'ufw status numbered')
sudo ufw status numbered
sudo ufw delete 3

# By rule specification
sudo ufw delete allow 80/tcp
```

### Application Profiles

List available application profiles:

```bash
sudo ufw app list
```

Show profile details:

```bash
sudo ufw app info 'Nginx Full'
```

Create custom application profile in `/etc/ufw/applications.d/myapp`:

```
[MyApp]
title=My Application
description=My custom application
ports=8080,8443/tcp
```

Then reload and use:

```bash
sudo ufw app update MyApp
sudo ufw allow 'MyApp'
```

## UFW Management Commands

### Check Status

```bash
# Basic status
sudo ufw status

# Detailed status
sudo ufw status verbose

# Numbered rules (for deletion)
sudo ufw status numbered
```

### Enable/Disable

```bash
# Enable firewall
sudo ufw enable

# Disable firewall (temporarily)
sudo ufw disable

# Reload rules
sudo ufw reload
```

### Reset UFW

**WARNING:** This removes ALL rules!

```bash
sudo ufw reset
```

### Logging

```bash
# Enable logging
sudo ufw logging on

# Set logging level (low, medium, high, full)
sudo ufw logging medium

# Disable logging
sudo ufw logging off
```

View logs:

```bash
sudo tail -f /var/log/ufw.log
```

## Common Firewall Configurations

### Basic Web Server

```bash
sudo ufw default deny incoming
sudo ufw default allow outgoing
sudo ufw allow ssh
sudo ufw allow 80/tcp
sudo ufw allow 443/tcp
sudo ufw enable
```

### Web + Database Server

```bash
sudo ufw default deny incoming
sudo ufw default allow outgoing
sudo ufw allow ssh
sudo ufw allow 80/tcp
sudo ufw allow 443/tcp
sudo ufw allow from 203.0.113.0/24 to any port 3306  # DB from app servers only
sudo ufw enable
```

### Restricted SSH Access

```bash
sudo ufw default deny incoming
sudo ufw default allow outgoing
sudo ufw allow from 203.0.113.10 to any port 22  # SSH from office IP only
sudo ufw allow 80/tcp
sudo ufw allow 443/tcp
sudo ufw enable
```

## Security Best Practices

1. **Default deny** - Start with deny all, then allow specific services
2. **Minimal ports** - Only open what you actually use
3. **IP restrictions** - Limit admin access to known IPs when possible
4. **Regular audits** - Review rules periodically: `sudo ufw status numbered`
5. **Combine with fail2ban** - Add dynamic blocking for brute-force attempts
6. **Monitor logs** - Check `/var/log/ufw.log` for suspicious activity
7. **Test before enabling** - Always allow SSH first!
8. **Document rules** - Keep notes on why each port is open

## Troubleshooting

### Locked Out After Enabling UFW

Prevention:

- Always allow SSH before enabling: `sudo ufw allow ssh`
- Test in a new terminal before closing existing sessions

Recovery:

- Use hosting provider's console/VNC access
- Disable firewall: `sudo ufw disable`
- Add SSH rule: `sudo ufw allow ssh`
- Re-enable: `sudo ufw enable`

### Service Not Accessible

```bash
# Check if port is allowed
sudo ufw status | grep <port>

# Check if service is listening
sudo ss -tulpn | grep <port>

# Check logs for blocks
sudo tail -f /var/log/ufw.log
```

### UFW Not Starting

```bash
# Check status
sudo systemctl status ufw

# Enable UFW service
sudo systemctl enable ufw
sudo systemctl start ufw

# Check for errors
sudo journalctl -u ufw
```

### IPv6 Issues

Enable IPv6 in `/etc/default/ufw`:

```
IPV6=yes
```

Then reload:

```bash
sudo ufw reload
```

## Common Mistakes to Avoid

- ❌ Enabling UFW before allowing SSH (lockout!)
- ❌ Opening all ports "temporarily" and forgetting to close them
- ❌ Not testing rules before going to production
- ❌ Allowing database ports from anywhere (0.0.0.0/0)
- ❌ Forgetting to enable UFW after configuration
- ❌ Not documenting why ports are open
- ❌ Disabling firewall instead of troubleshooting issues

## UFW vs iptables

UFW is a frontend for iptables that simplifies firewall management:

- **UFW:** User-friendly, simple syntax, good for most cases
- **iptables:** Full control, complex syntax, advanced scenarios

UFW rules are translated to iptables rules under the hood. For advanced needs, you can still use iptables directly, but UFW is recommended for most users.

## Additional Resources

See [references/ufw-rules.md](references/ufw-rules.md) for complete UFW rule reference.

See [scripts/setup-firewall.sh](scripts/setup-firewall.sh) for automated setup script.

## Related Skills

- `ssh-hardening` - Secure SSH before enabling firewall
- `fail2ban-setup` - Add dynamic IP blocking
- `auto-updates` - Keep firewall software updated