# Pp Sendgrid > Every Twilio SendGrid endpoint, plus offline suppression diffs, stats time-series rollups, and a template-variable... Trigger phrases: `send transactional mail`, `manage SendGrid suppressions`, `audit SendGrid bounces`, `SendGrid templates lint`, `SendGrid stats rollup`, `use sendgrid`, `run sendgrid`. - Skill: `mvanhorn-printing-press-libra/pp-sendgrid` (Agent Skill) - Install (CLI): `npx skillmds add mvanhorn-printing-press-libra/pp-sendgrid` - Raw SKILL.md: https://api.skillmd.com/api/skills/mvanhorn-printing-press-libra/pp-sendgrid/raw - Safety review: pending - Works with: Claude Code, Claude.ai, OpenAI Codex - Category: Security - License: Apache-2.0 - Author: mvanhorn (https://skillmd.com/u/mvanhorn-printing-press-libra) - Updated: 2026-09-09 - Page: https://skillmd.com/skills/mvanhorn-printing-press-libra/pp-sendgrid --- # Twilio SendGrid — Printing Press CLI ## Prerequisites: Install the CLI This skill drives the `sendgrid-pp-cli` binary. **You must verify the CLI is installed before invoking any command from this skill.** If it is missing, install it first: 1. Install via the Printing Press installer. It defaults binaries to `$HOME/.local/bin` on macOS/Linux and `%LOCALAPPDATA%\Programs\PrintingPress\bin` on Windows: ```bash npx -y @mvanhorn/printing-press-library install sendgrid --cli-only ``` 2. Verify: `sendgrid-pp-cli --version` 3. Ensure the reported install directory is on `$PATH` for the agent/runtime that will invoke this skill. If the `npx` install fails (no Node, offline, etc.), fall back to a direct Go install (requires Go 1.26.6 or newer): ```bash go install github.com/mvanhorn/printing-press-library/library/productivity/sendgrid/cmd/sendgrid-pp-cli@latest ``` If `--version` reports "command not found" after install, the runtime cannot see the binary directory on `$PATH`. Do not proceed with skill commands until verification succeeds. ## When to Use This CLI Use sendgrid-pp-cli for any SendGrid task an agent or operator wants to run from the terminal: transactional mail sends, suppression hygiene, contact list mirror, marketing campaign post-mortems, deliverability stats reporting, template management, and subuser rollups. It is the right choice when the workflow needs cross-endpoint joins (bounce investigations) or offline analysis (stats rollups, diffs) that the live API alone cannot produce. ## Unique Capabilities These capabilities aren't available in any other tool for this API. ### Local state that compounds - **`suppression sync`** — Bidirectional sync between SendGrid suppressions and an external CSV/CRM source, with dry-run preview and unified schema across the four inconsistent suppression types. _When you need to reconcile SendGrid's suppression list with another system without writing custom glue code per suppression type._ ```bash sendgrid-pp-cli suppression sync --from internal-suppressions.csv --apply --dry-run --json ``` - **`suppression diff`** — Three-way diff between the local SQLite mirror, live API, and an external CSV; shows adds, drops, and drift across the suppression universe. _When auditing CRM ↔ SendGrid drift before a cleanup pass or migration._ ```bash sendgrid-pp-cli suppression diff bounces --against crm-export.csv --json ``` - **`stats rollup`** — Pulls flat windowed stats from the API, stores them in SQLite, and computes day/week/month rollups plus WoW/MoM deltas. _Use for trend reporting and weekly deliverability standups without paying for paid analytics._ ```bash sendgrid-pp-cli stats rollup --by week --metric opens,clicks --window 90d --json ``` - **`templates diff`** — Side-by-side semantic diff of two template versions (HTML, plain text, subject, test data) with HTML-aware normalization. _Use during template review to see exactly what changed between draft versions._ ```bash sendgrid-pp-cli templates diff d-abc123 v1 v2 ``` ### Pre-flight checks the API skips - **`templates lint`** — Statically extracts {{handlebars}} from a template version and cross-checks them against a contact record or JSON payload, flagging missing or typo'd variables before send. _Use before any production send to catch silently-empty template variables that would otherwise ship as blanks._ ```bash sendgrid-pp-cli templates lint d-abc123 --against '{"first_name":"Sam"}' --json ``` ### Cross-endpoint joins - **`bounce why`** — Joins suppressions, email activity, and stats locally to produce a narrative explaining why a specific address keeps bouncing. _When a customer reports they aren't getting emails and you need a fast root cause._ ```bash sendgrid-pp-cli bounce why user@example.com --json ``` - **`subusers rollup`** — Fans out per-subuser stats pulls in parallel, caches them locally, and produces a single aggregated table for ESP operators managing tenant hierarchies. _Use for tenant-level deliverability reporting when you run subusers and need per-tenant numbers in one view._ ```bash sendgrid-pp-cli subusers rollup --metric reputation,bounces --window 30d --json ``` ### Rate-aware streaming - **`activity tail`** — Streams Email Activity events with rate-limit-aware polling (respects the 6/min cap), local FTS, and filters by status/from/to. _Use during a deliverability incident to watch events as they happen without tripping the rate limit._ ```bash sendgrid-pp-cli activity tail --filter status:bounce --json ``` ## Command Reference **access-settings** — Manage access settings - `sendgrid-pp-cli access-settings add-ip-to-allow-list` — **This endpoint allows you to add one or more allowed IP addresses.** To allow one or more IP addresses, pass them... - `sendgrid-pp-cli access-settings delete-allowed-ip` — **This endpoint allows you to remove a specific IP address from your list of allowed addresses.** When removing a... - `sendgrid-pp-cli access-settings delete-allowed-ips` — **This endpoint allows you to remove one or more IP addresses from your list of allowed addresses.** To remove one... - `sendgrid-pp-cli access-settings get-allowed-ip` — **This endpoint allows you to retreive a specific IP address that has been allowed to access your account.** You... - `sendgrid-pp-cli access-settings list-access-activity` — **This endpoint allows you to retrieve a list of all of the IP addresses that recently attempted to access your... - `sendgrid-pp-cli access-settings list-allowed-ip` — **This endpoint allows you to retrieve a list of IP addresses that are currently allowed to access your account.**... **alerts** — Twilio SendGrid Alerts API. - `sendgrid-pp-cli alerts create` — **This endpoint allows you to create a new alert.** - `sendgrid-pp-cli alerts delete` — **This endpoint allows you to delete an alert.** - `sendgrid-pp-cli alerts get` — **This endpoint allows you to retrieve a specific alert.** - `sendgrid-pp-cli alerts list` — **This endpoint allows you to retrieve all of your alerts.** - `sendgrid-pp-cli alerts update` — **This endpoint allows you to update an alert.** **api-keys** — Twilio SendGrid API Keys API. - `sendgrid-pp-cli api-keys create` — **This endpoint allows you to create a new API Key for the user.** To create your initial SendGrid API Key, you... - `sendgrid-pp-cli api-keys delete` — **This endpoint allows you to revoke an existing API Key using an `api_key_id`** Authentications using a revoked API... - `sendgrid-pp-cli api-keys get` — **This endpoint allows you to retrieve a single API key using an `api_key_id`.** The endpoint will return a key's... - `sendgrid-pp-cli api-keys list` — **This endpoint allows you to retrieve all API Keys that belong to the authenticated user.** A successful response... - `sendgrid-pp-cli api-keys update` — **This endpoint allows you to update the name and scopes of a given API key.** You must pass this endpoint a JSON... - `sendgrid-pp-cli api-keys update-name` — **This endpoint allows you to update the name of an existing API Key.** You must pass this endpoint a JSON request... **asm** — Manage asm - `sendgrid-pp-cli asm add-suppression-to-group` — **This endpoint allows you to add email addresses to an unsubscribe group.** If you attempt to add suppressions to a... - `sendgrid-pp-cli asm creat-group` — **This endpoint allows you to create a new suppression group.** To add an email address to the suppression group,... - `sendgrid-pp-cli asm create-global-suppression` — **This endpoint allows you to add one or more email addresses to the global suppressions group.** - `sendgrid-pp-cli asm delete-global-suppression` — **This endpoint allows you to remove an email address from the global suppressions group.** Deleting a suppression... - `sendgrid-pp-cli asm delete-group` — **This endpoint allows you to delete a suppression group.** If a recipient uses the 'one-click unsubscribe' option... - `sendgrid-pp-cli asm delete-suppression-from-group` — **This endpoint allows you to remove a suppressed email address from the given suppression group.** Removing an... - `sendgrid-pp-cli asm get-global-suppression` — **This endpoint allows you to retrieve a global suppression. You can also use this endpoint to confirm if an email... - `sendgrid-pp-cli asm get-group` — **This endpoint allows you to retrieve a single suppression group.** - `sendgrid-pp-cli asm get-suppression` — **This endpoint returns a list of all groups from which the given email address has been unsubscribed.** - `sendgrid-pp-cli asm list-group` — **This endpoint allows you to retrieve a list of all suppression groups created by this user.** This endpoint can... - `sendgrid-pp-cli asm list-suppression` — **This endpoint allows you to retrieve a list of all suppressions.** - `sendgrid-pp-cli asm list-suppression-from-group` — **This endpoint allows you to retrieve all suppressed email addresses belonging to the given group.** - `sendgrid-pp-cli asm search-suppression-from-group` — **This endpoint allows you to search a suppression group for multiple suppressions.** When given a list of email... - `sendgrid-pp-cli asm update-group` — **This endpoint allows you to update or change a suppression group.** **browsers** — Manage browsers - `sendgrid-pp-cli browsers` — **This endpoint allows you to retrieve your email statistics segmented by browser type.** **We only store up to 7... **campaigns** — Manage campaigns - `sendgrid-pp-cli campaigns create` — **This endpoint allows you to create a campaign.** In order to send or schedule the campaign, you will be required... - `sendgrid-pp-cli campaigns delete` — **This endpoint allows you to delete a specific campaign.** - `sendgrid-pp-cli campaigns get` — **This endpoint allows you to retrieve a specific campaign.** - `sendgrid-pp-cli campaigns list` — **This endpoint allows you to retrieve a paginated list of all of your campaigns.** Returns campaigns in reverse... - `sendgrid-pp-cli campaigns update` — **This endpoint allows you to update a specific campaign.** This is especially useful if you only set up the... **categories** — Twilio SendGrid Category Stats API - `sendgrid-pp-cli categories list-category` — **This endpoint allows you to retrieve a paginated list of all of your categories.** You can use the `limit` query... - `sendgrid-pp-cli categories list-category-stat` — **This endpoint allows you to retrieve all of your email statistics for each of your categories.** If you do not... - `sendgrid-pp-cli categories list-category-stat-sum` — **This endpoint allows you to retrieve the total sum of each email statistic for every category over the given date... **clients** — Manage clients - `sendgrid-pp-cli clients` — **This endpoint allows you to retrieve your email statistics segmented by client type.** **We only store up to 7... **contactdb** — Manage contactdb - `sendgrid-pp-cli contactdb add-recipient` — **This endpoint allows you to add a Marketing Campaigns recipient.** You can add custom field data as a parameter on... - `sendgrid-pp-cli contactdb add-recipient-to-contact-db-list` — **This endpoint allows you to add a single recipient to a list.** - `sendgrid-pp-cli contactdb add-recipients-to-contact-db-list` — **This endpoint allows you to add multiple recipients to a list.** Adds existing recipients to a list, passing in... - `sendgrid-pp-cli contactdb create-contact-db-list` — **This endpoint allows you to create a list for your recipients.** - `sendgrid-pp-cli contactdb create-custom-field` — **This endpoint allows you to create a custom field.** **You can create up to 120 custom fields.** - `sendgrid-pp-cli contactdb create-segment` — **This endpoint allows you to create a new segment.** Valid operators for create and update depend on the type of... - `sendgrid-pp-cli contactdb delete-contact-db-list` — **This endpoint allows you to delete a specific recipient list with the given ID.** - `sendgrid-pp-cli contactdb delete-contact-db-lists` — **This endpoint allows you to delete multiple recipient lists.** - `sendgrid-pp-cli contactdb delete-custom-field` — **This endpoint allows you to delete a custom field by ID.** - `sendgrid-pp-cli contactdb delete-recipient` — **This endpoint allows you to delete a single recipient with the given ID from your contact database.** > Use this... - `sendgrid-pp-cli contactdb delete-recipient-from-contact-db-list` — **This endpoint allows you to delete a single recipient from a list.** - `sendgrid-pp-cli contactdb delete-recipients` — **This endpoint allows you to deletes one or more recipients.** The body of an API call to this endpoint must... - `sendgrid-pp-cli contactdb delete-segment` — **This endpoint allows you to delete a segment from your recipients database.** You also have the option to delete... - `sendgrid-pp-cli contactdb export-recipient` — **Use this endpoint to export lists or segments of recipients**. If you would just like to have a link to the... - `sendgrid-pp-cli contactdb get-billable` — **This endpoint allows you to retrieve the number of Marketing Campaigns recipients that you will be billed for.**... - `sendgrid-pp-cli contactdb get-contact-db-list` — **This endpoint allows you to retrieve a single recipient list.** - `sendgrid-pp-cli contactdb get-custom-field` — **This endpoint allows you to retrieve a custom field by ID.** - `sendgrid-pp-cli contactdb get-export-recipient` — **This endpoint can be used to check the status of a recipient export job**. To use this call, you will need the... - `sendgrid-pp-cli contactdb get-recipient` — **This endpoint allows you to retrieve a single recipient by ID from your contact database.** - `sendgrid-pp-cli contactdb get-recipient-list` — **This endpoint allows you to retrieve the lists that a given recipient belongs to.** Each recipient can be on many... - `sendgrid-pp-cli contactdb get-segment` — **This endpoint allows you to retrieve a single segment with the given ID.** - `sendgrid-pp-cli contactdb list-contact-db-list` — **This endpoint allows you to retrieve all of your recipient lists. If you don't have any lists, an empty array will... - `sendgrid-pp-cli contactdb list-custom-field` — **This endpoint allows you to retrieve all custom fields.** - `sendgrid-pp-cli contactdb list-export-recipient` — **Use this endpoint to retrieve details of all current exported jobs**. It will return an array of objects, each of... - `sendgrid-pp-cli contactdb list-recipient` — **This endpoint allows you to retrieve all of your Marketing Campaigns recipients.** Batch deletion of a page makes... - `sendgrid-pp-cli contactdb list-recipient-count` — **This endpoint allows you to retrieve the total number of Marketing Campaigns recipients.** - `sendgrid-pp-cli contactdb list-recipient-for-segment` — **This endpoint allows you to retrieve all of the recipients in a segment with the given ID.** - `sendgrid-pp-cli contactdb list-recipients-from-contact-db-list` — **This endpoint allows you to retrieve all recipients on the list with the given ID.** - `sendgrid-pp-cli contactdb list-reserved-field` — **This endpoint allows you to list all fields that are reserved and can't be used for custom field names.** - `sendgrid-pp-cli contactdb list-search-recipient` — **This endpoint allows you to perform a search on all of your Marketing Campaigns recipients.** field_name: * is a... - `sendgrid-pp-cli contactdb list-segment` — **This endpoint allows you to retrieve all of your segments.** - `sendgrid-pp-cli contactdb list-status` — **This endpoint allows you to check the upload status of a Marketing Campaigns recipient.** - `sendgrid-pp-cli contactdb search-recipient` — Search using segment conditions without actually creating a segment. Body contains a JSON object with `conditions`,... - `sendgrid-pp-cli contactdb update-contact-db-list` — **This endpoint allows you to update the name of one of your recipient lists.** - `sendgrid-pp-cli contactdb update-recipient` — **This endpoint allows you to update one or more recipients.** The body of an API call to this endpoint must include... - `sendgrid-pp-cli contactdb update-segment` — **This endpoint allows you to update a segment.** **designs** — Twilio SendGrid Marketing Campaigns Designs API - `sendgrid-pp-cli designs create` — **This endpoint allows you to create a new design**. You can add a new design by passing data, including a string of... - `sendgrid-pp-cli designs delete` — **This endpoint allows you to delete a single design**. Be sure to check the ID of the design you intend to delete... - `sendgrid-pp-cli designs duplicate` — **This endpoint allows you to duplicate one of your existing designs**. Modifying an existing design is often the... - `sendgrid-pp-cli designs duplicate-pre-built` — **This endpoint allows you to duplicate one of the pre-built Twilio SendGrid designs**. Like duplicating one of your... - `sendgrid-pp-cli designs get` — **This endpoint allows you to retrieve a single design**. A GET request to `/designs/{id}` will retrieve details... - `sendgrid-pp-cli designs get-pre-built` — **This endpoint allows you to retrieve a single pre-built design**. A GET request to `/designs/pre-builts/{id}` will... - `sendgrid-pp-cli designs list` — **This endpoint allows you to retrieve a list of designs already stored in your Design Library**. A GET request to... - `sendgrid-pp-cli designs list-pre-built` — **This endpoint allows you to retrieve a list of pre-built designs provided by Twilio SendGrid**. Unlike the... - `sendgrid-pp-cli designs update` — **This endpoint allows you to edit a design**. The Design API supports PATCH requests, which allow you to make... **devices** — Manage devices - `sendgrid-pp-cli devices` — **This endpoint allows you to retrieve your email statistics segmented by the device type.** **We only store up to 7... **engagementquality** — Manage engagementquality - `sendgrid-pp-cli engagementquality list-engagement-quality-score` — **This operation allows you to retrieve your SendGrid Engagement Quality (SEQ) scores for a specified date range**.... - `sendgrid-pp-cli engagementquality list-subuser-engagement-quality-score` — **This operation allows you to retrieve SendGrid Engagement Quality (SEQ) scores for your Subusers or customer... **geo** — Manage geo - `sendgrid-pp-cli geo` — **This endpoint allows you to retrieve your email statistics segmented by country and state/province.** **We only... **ips** — Manage ips - `sendgrid-pp-cli ips add` — **This endpoint is for adding a(n) IP Address(es) to your account.** - `sendgrid-pp-cli ips add-to-pool` — **This endpoint allows you to add an IP address to an IP pool.** You can add the same IP address to multiple pools.... - `sendgrid-pp-cli ips create-pool` — **This endpoint allows you to create an IP pool.** Before you can create an IP pool, you need to activate the IP in... - `sendgrid-pp-cli ips delete-from-pool` — **This endpoint allows you to remove an IP address from an IP pool.** - `sendgrid-pp-cli ips delete-pool` — **This endpoint allows you to delete an IP pool.** - `sendgrid-pp-cli ips get` — **This endpoint allows you to see which IP pools a particular IP address has been added to.** The same IP address... - `sendgrid-pp-cli ips get-pool` — **This endpoint allows you to get all of the IP addresses that are in a specific IP pool.** - `sendgrid-pp-cli ips get-warm-up` — **This endpoint allows you to retrieve the warmup status for a specific IP address.** You can retrieve all of your... - `sendgrid-pp-cli ips list` — **This endpoint allows you to retrieve a paginated list of all assigned and unassigned IPs.** Response includes warm... - `sendgrid-pp-cli ips list-assigned` — **This endpoint allows you to retrieve only assigned IP addresses.** A single IP address or a range of IP addresses... - `sendgrid-pp-cli ips list-pool` — **This endpoint allows you to get all of your IP pools.** - `sendgrid-pp-cli ips list-remaining-count` — **This endpoint gets amount of IP Addresses that can still be created during a given period and the price of those... - `sendgrid-pp-cli ips list-warm-up` — **This endpoint allows you to retrieve all of your IP addresses that are currently warming up.** - `sendgrid-pp-cli ips stop-warm-up` — **This endpoint allows you to remove an IP address from warmup mode.** Your request will return a 204 status code if... - `sendgrid-pp-cli ips update-pool` — **This endpoint allows you to update the name of an IP pool.** - `sendgrid-pp-cli ips warm-up` — **This endpoint allows you to put an IP address into warmup mode.** **logs** — Manage logs - `sendgrid-pp-cli logs get-message-by-id` — Get all of the details about the specified message. - `sendgrid-pp-cli logs list-messages-by-filter` — List recent messages within Email Logs, or search for messages using a filter. **mail** — Manage mail - `sendgrid-pp-cli mail create-batch` — **This operation allows you to generate a new mail batch ID.** Once a batch ID is created, you can associate it with... - `sendgrid-pp-cli mail get-batch` — **This operation allows you to validate a mail batch ID.** If you provide a valid batch ID, this operation will... - `sendgrid-pp-cli mail send` — *The Mail Send operation allows you to send email over SendGrid's v3 Web API* For an overview of this API, including... **mail-settings** — Twilio SendGrid Mail Settings API - `sendgrid-pp-cli mail-settings list` — **This endpoint allows you to retrieve a paginated list of all mail settings.** Each setting will be returned with... - `sendgrid-pp-cli mail-settings list-address-whitelist` — **This endpoint allows you to retrieve your current email address whitelist settings.** The Address Whitelist... - `sendgrid-pp-cli mail-settings list-bounce-purge` — **This endpoint allows you to retrieve your current Bounce Purge mail settings.** The Bounce Purge mail setting... - `sendgrid-pp-cli mail-settings list-footer` — **This endpoint allows you to retrieve your current Footer mail settings.** The Footer setting will insert a custom... - `sendgrid-pp-cli mail-settings list-forward-bounce` — **This endpoint allows you to retrieve your current bounce forwarding mail settings.** Enabling the Forward Bounce... - `sendgrid-pp-cli mail-settings list-forward-spam` — **This endpoint allows you to retrieve your current Forward Spam mail settings.** Enabling the Forward Spam setting... - `sendgrid-pp-cli mail-settings list-template` — **This endpoint allows you to retrieve your current legacy email template settings.** This setting refers to our... - `sendgrid-pp-cli mail-settings update-address-whitelist` — **This endpoint allows you to update your current email address whitelist settings.** For Regional Subusers -... - `sendgrid-pp-cli mail-settings update-bounce-purge` — **This endpoint allows you to update your current Bounce Purge mail settings.** The Bounce Purge mail metting allows... - `sendgrid-pp-cli mail-settings update-footer` — **This endpoint allows you to update your current Footer mail settings.** The Footer setting will insert a custom... - `sendgrid-pp-cli mail-settings update-forward-bounce` — **This endpoint allows you to update your current bounce forwarding mail settings.** Enabling the Forward Bounce... - `sendgrid-pp-cli mail-settings update-forward-spam` — **This endpoint allows you to update your current Forward Spam mail settings.** Enabling the Forward Spam setting... - `sendgrid-pp-cli mail-settings update-template` — **This endpoint allows you to update your current legacy email template settings.** This setting refers to our... **mailbox-providers** — Manage mailbox providers - `sendgrid-pp-cli mailbox-providers` — **This endpoint allows you to retrieve your email statistics segmented by recipient mailbox provider.** **We only... **marketing** — Manage marketing - `sendgrid-pp-cli marketing add-integration` — This endpoint creates an Integration for email event forwarding. Each Integration has a maximum number of allowed... - `sendgrid-pp-cli marketing create-field-definition` — **This endpoint creates a new custom field definition.** Custom field definitions are created with the given `name`... - `sendgrid-pp-cli marketing create-list` — **This endpoint creates a new contacts list.** Once you create a list, you can use the UI to [trigger an... - `sendgrid-pp-cli marketing create-segment` — Segment `name` has to be unique. A user can not create a new segment with an existing segment name. - `sendgrid-pp-cli marketing create-sender` — **This endpoint allows you to create a new Sender.** *You may create up to 100 unique Senders.* Senders are required... - `sendgrid-pp-cli marketing create-single-send` — **This endpoint allows you to create a new Single Send.** Please note that if you are migrating from the previous... - `sendgrid-pp-cli marketing delete-contact` — **This endpoint can be used to delete one or more contacts**. The query parameter `ids` must set to a... - `sendgrid-pp-cli marketing delete-contact-identifier` — **This endpoint can be used to delete one identifier from a contact.** Deletion jobs are processed asynchronously.... - `sendgrid-pp-cli marketing delete-contact-lists` — **This endpoint allows you to remove contacts from a given list.** The contacts will not be deleted. Only their list... - `sendgrid-pp-cli marketing delete-field-definition` — **This endpoint deletes a defined Custom Field.** You can delete only Custom Fields; Reserved Fields cannot be deleted. - `sendgrid-pp-cli marketing delete-integration` — This endpoint deletes Integrations. - `sendgrid-pp-cli marketing delete-list` — **This endpoint allows you to deletes a specific list.** Optionally, you can also delete contacts associated to the... - `sendgrid-pp-cli marketing delete-scheduled-single-send` — **This endpoint allows you to cancel a scheduled Single Send using a Single Send ID.** Making a DELETE request to... - `sendgrid-pp-cli marketing delete-segment` — **This endpoint allows you to delete a segment by `segment_id`.** Note that deleting a segment does not delete the... - `sendgrid-pp-cli marketing delete-segment-segments` — **This endpoint allows you to delete a segment by ID.** - `sendgrid-pp-cli marketing delete-sender` — **This endpoint allows you to delete an existing Sender.** - `sendgrid-pp-cli marketing delete-single-send` — **This endpoint allows you to delete one Single Send using a Single Send ID.** To first retrieve all your Single... - `sendgrid-pp-cli marketing delete-single-sends` — **This endpoint allows you to delete multiple Single Sends using an array of Single Sends IDs.** To first retrieve... - `sendgrid-pp-cli marketing duplicate-single-send` — **This endpoint allows you to duplicate an existing Single Send using its Single Send ID.** Duplicating a Single... - `sendgrid-pp-cli marketing export-automation-stat` — **This endpoint allows you to export Single Send stats as .CSV data**. You can specify one Single Send or many:... - `sendgrid-pp-cli marketing export-contact` — **Use this endpoint to export lists or segments of contacts**. If you would just like to have a link to the exported... - `sendgrid-pp-cli marketing export-single-send-stat` — **This endpoint allows you to export Single Send stats as .CSV data**. You can specify one Single Send or many:... - `sendgrid-pp-cli marketing find-integration-by-id` — This endpoint returns the data for a specific Integration. - `sendgrid-pp-cli marketing get-automation-stat` — **This endpoint allows you to retrieve stats for a single Automation using its ID.** Multiple Automation IDs can be... - `sendgrid-pp-cli marketing get-contact` — **This endpoint returns the full details and all fields for the specified contact**. The 'Get Contacts by... - `sendgrid-pp-cli marketing get-contact-by-identifiers` — Use this endpoint to retrieve up to 100 contacts that match the requested identifier values for a single identifier... - `sendgrid-pp-cli marketing get-export-contact` — **This endpoint can be used to check the status of a contact export job**. To use this call, you will need the `id`... - `sendgrid-pp-cli marketing get-import-contact` — **This endpoint can be used to check the status of a contact import job**. Use the `job_id` from the 'Import... - `sendgrid-pp-cli marketing get-integrations-by-user` — This endpoint returns all the Integrations for the user making this call. - `sendgrid-pp-cli marketing get-list` — **This endpoint returns data about a specific list.** Setting the optional parameter `contact_sample=true` returns... - `sendgrid-pp-cli marketing get-segment` — **This endpoint allows you to retrieve a single segment by ID.** - `sendgrid-pp-cli marketing get-segment-segments` — Get Marketing Campaigns Segment by ID - `sendgrid-pp-cli marketing get-sender` — **This endpoint allows you to get the details for a specific Sender by `id`.** - `sendgrid-pp-cli marketing get-single-send` — **This endpoint allows you to retrieve details about one Single Send using a Single Send ID.** You can retrieve all... - `sendgrid-pp-cli marketing get-single-send-stat` — **This endpoint allows you to retrieve stats for an individual Single Send using a Single Send ID.** Multiple Single... - `sendgrid-pp-cli marketing import-contact` — **This endpoint allows a CSV upload containing up to one million contacts or 5GB of data, whichever is smaller. At... - `sendgrid-pp-cli marketing list-automation-stat` — **This endpoint allows you to retrieve stats for all your Automations.** By default, all of your Automations will be... - `sendgrid-pp-cli marketing list-batched-contact` — **This endpoint is used to retrieve a set of contacts identified by their IDs.** This can be more efficient endpoint... - `sendgrid-pp-cli marketing list-category` — **This endpoint allows you to retrieve all the categories associated with your Single Sends.** This endpoint will... - `sendgrid-pp-cli marketing list-click-tracking-stat` — **This endpoint lets you retrieve click-tracking stats for a single Automation**. The stats returned list the URLs... - `sendgrid-pp-cli marketing list-contact` — **This endpoint will return up to 50 of the most recent contacts uploaded or attached to a list**. This list will... - `sendgrid-pp-cli marketing list-contact-by-email` — **This endpoint allows you to retrieve up to 100 contacts matching the searched `email` address(es), including any... - `sendgrid-pp-cli marketing list-contact-count` — **This endpoint returns the total number of contacts you have stored.** Twilio SendGrid recommends exporting your... - `sendgrid-pp-cli marketing list-contact-count-lists` — **This endpoint returns the number of contacts on a specific list.** - `sendgrid-pp-cli marketing list-export-contact` — **Use this endpoint to retrieve details of all current exported jobs**. It will return an array of objects, each of... - `sendgrid-pp-cli marketing list-field-definition` — **This endpoint retrieves all defined Custom Fields and Reserved Fields.** - `sendgrid-pp-cli marketing list-list` — **This endpoint returns an array of all of your contact lists.** - `sendgrid-pp-cli marketing list-segment` — **This endpoint allows you to retrieve a list of segments.** The query param `parent_list_ids` is treated as a... - `sendgrid-pp-cli marketing list-segment-segments` — **This endpoint allows you to retrieve a list of segments.** The query param `parent_list_ids` is treated as a... - `sendgrid-pp-cli marketing list-sender` — **This endpoint allows you to get a list of all your Senders.** - `sendgrid-pp-cli marketing list-single-send` — **This endpoint allows you to retrieve all your Single Sends.** Returns all of your Single Sends with condensed... - `sendgrid-pp-cli marketing list-single-send-stat` — **This endpoint allows you to retrieve stats for all your Single Sends.** By default, all of your Single Sends will... - `sendgrid-pp-cli marketing list-single-send-tracking-stat` — **This endpoint lets you retrieve click-tracking stats for one Single Send**. The stats returned list the URLs... - `sendgrid-pp-cli marketing refresh-segment` — Manually refresh a segment by segment ID. - `sendgrid-pp-cli marketing reset-sender-verification` — **This endpoint allows you to resend the verification request for a specific Sender.** - `sendgrid-pp-cli marketing schedule-single-send` — **This endpoint allows you to send a Single Send immediately or schedule it to be sent at a later time.** To send... - `sendgrid-pp-cli marketing search-contact` — **Use this endpoint to locate contacts**. The request body's `query` field accepts valid... - `sendgrid-pp-cli marketing search-single-send` — **This endpoint allows you to search for Single Sends based on specified criteria.** You can search for Single Sends... - `sendgrid-pp-cli marketing send-test-email` — **This endpoint allows you to send a test marketing email to a list of email addresses**. Before sending a marketing... - `sendgrid-pp-cli marketing update-contact` — **This endpoint allows the [upsert](https://en.wiktionary.org/wiki/upsert) (insert or update) of up to 30,000... - `sendgrid-pp-cli marketing update-field-definition` — **This endpoint allows you to update a defined Custom Field.** Only your Custom fields can be modified; Reserved... - `sendgrid-pp-cli marketing update-integration` — This endpoint updates an existing Integration. - `sendgrid-pp-cli marketing update-list` — **This endpoint updates the name of a list.** - `sendgrid-pp-cli marketing update-segment` — Segment `name` has to be unique. A user can not create a new segment with an existing segment name. - `sendgrid-pp-cli marketing update-sender` — **This endpoint allows you to update an existing Sender.** Updates to `from.email` require re-verification. If your... - `sendgrid-pp-cli marketing update-single-send` — **This endpoint allows you to update a Single Send using a Single Send ID.** You only need to pass the properties... **messages** — Manage messages - `sendgrid-pp-cli messages download-csv` — **This endpoint will return a presigned URL that can be used to download the CSV that was requested from the... - `sendgrid-pp-cli messages get` — Get all of the details about the specified message. For Regional (EU) subusers, no data will be generated for this... - `sendgrid-pp-cli messages list` — Filter all messages to search your Email Activity. All queries must be [URL... - `sendgrid-pp-cli messages request-csv` — This request will kick off a backend process to generate a CSV file. Once generated, the worker will then send an... **partner-settings** — Twilio SendGrid Partner Settings API - `sendgrid-pp-cli partner-settings` — **This endpoint allows you to retrieve a paginated list of all partner settings that you can enable.** You can use... **partners** — Manage partners - `sendgrid-pp-cli partners add-account-ips` — Adds IP(s) to the specified account. - `sendgrid-pp-cli partners authenticate-account` — Authenticates and logs in a user to Twilio Sendgrid as a specific admin identity configured for SSO by partner. Any... - `sendgrid-pp-cli partners create-account` — Creates a new account, with specified offering, under the organization. - `sendgrid-pp-cli partners delete-account` — Delete a specific account under your organization by account ID. Note that this is an **irreversible** action that... - `sendgrid-pp-cli partners get-account-state` — Retrieve the state of the specified account. - `sendgrid-pp-cli partners list-account` — Retrieves all accounts under the organization. - `sendgrid-pp-cli partners list-account-ips` — Retrieves a paginated list of IPs associated with the specified account, ordered by most recently added IP. - `sendgrid-pp-cli partners list-account-offering` — Retrieves offering information about the specified account. - `sendgrid-pp-cli partners list-offering` — Retrieves offerings available under the organization. - `sendgrid-pp-cli partners remove-account-ips` — Removes IP(s) from the specified account. - `sendgrid-pp-cli partners update-account-offering` — Changes a package offering for the specified account. Please note that an account can have only one package... - `sendgrid-pp-cli partners update-account-state` — Update the state of the specified account. **recipients** — Twilio SendGrid Legacy Marketing Campaigns Contacts: Recipients API - `sendgrid-pp-cli recipients` — **This operation allows you to delete your recipients' personal email data** The Delete Recipients' Email Data... **scopes** — Twilio SendGrid Scopes API - `sendgrid-pp-cli scopes` — **This endpoint returns a list of all scopes that this user has access to.** API Keys are used to authenticate with... **send-ips** — Manage send ips - `sendgrid-pp-cli send-ips add-ip` — This operation adds a Twilio SendGrid IP address to your account. You can also assign up to 100 Subusers to the IP... - `sendgrid-pp-cli send-ips add-ips-to-ip-pool` — This operation appends a batch of IPs to an IP Pool. This operation requires all IP assignments to succeed. If any... - `sendgrid-pp-cli send-ips add-sub-users-to-ip` — This operation appends a batch of Subusers to a specified IP address. This endpoint requires all Subuser assignments... - `sendgrid-pp-cli send-ips create-ip-pool` — This operation will create a named IP Pool and associate specified IP addresses with the newly created Pool. This... - `sendgrid-pp-cli send-ips delete-ip-pool` — This operation deletes an IP Pool and unassigns all IP addresses associated with the Pool. IP addresses associated... - `sendgrid-pp-cli send-ips delete-ips-from-ip-pool` — This operation removes a batch of IPs from an IP Pool. All IPs associated with the Pool will be unassigned from the... - `sendgrid-pp-cli send-ips delete-sub-users-from-ip` — This operation removes a batch of Subusers from a specified IP address. - `sendgrid-pp-cli send-ips get-ip` — This operation returns details for a specified IP address. Details include whether the IP is assigned to a parent... - `sendgrid-pp-cli send-ips get-ip-pool` — This operation will return the details for a specified IP Pool, including the Pool's name, ID, a sample list of the... - `sendgrid-pp-cli send-ips list-ip` — This operation returns a list of all IP addresses associated with your account. A sample of IP details is returned... - `sendgrid-pp-cli send-ips list-ip-assigned-to-ip-pool` — This operation returns the IP addresses that are assigned to the specified IP pool. - `sendgrid-pp-cli send-ips list-ip-pool` — This operation returns a list of your IP Pools and a sample of each Pools' associated IP addresses. A maximum of 10... - `sendgrid-pp-cli send-ips list-sub-user-assigned-to-ip` — This operation returns a list of Subuser IDs that have been assigned the specified IP address. To retrieve more... - `sendgrid-pp-cli send-ips update-ip` — This operation updates an IP address's settings, including whether the IP is set to warm up automatically, if the IP... - `sendgrid-pp-cli send-ips update-ip-pool` — This operation will rename an IP Pool. An IP Pool name cannot start with a dot/period (.) or space. **senders** — Twilio SendGrid Marketing Campaigns Senders API - `sendgrid-pp-cli senders create` — **This endpoint allows you to create a new sender identity.** You may create up to 100 unique sender identities. - `sendgrid-pp-cli senders delete` — **This endpoint allows you to delete one of your sender identities.** - `sendgrid-pp-cli senders get` — **This endpoint allows you to retrieve a specific sender identity.** - `sendgrid-pp-cli senders list` — **This endpoint all …(truncated)