# Deviceterm Screenshots > Capture App Store and marketing screenshots of an app across device families, locales, and light or dark appearance, from inside a DeviceTerm tab. Use when asked for App Store screenshots, store listing images, marketing captures, or a screenshot matrix. Combines xcrun simctl for status bar, appearance, and capture with deviceterm input for navigating to each screen. - Skill: `sethdeckard/deviceterm-screenshots` (Agent Skill, multi-file: 3 files) - Install (CLI): `npx skillmds@latest add sethdeckard/deviceterm-screenshots` - Raw SKILL.md: https://api.skillmd.com/api/skills/sethdeckard/deviceterm-screenshots/raw - Safety review: pending - Works with: Claude Code, Claude.ai, OpenAI Codex - Category: Marketing & Growth - Author: sethdeckard (https://skillmd.com/u/sethdeckard) - Updated: 2026-09-17 - Page: https://skillmd.com/skills/sethdeckard/deviceterm-screenshots --- # App Store screenshots Authored against deviceterm 0.6.0. Where this skill and `deviceterm help ` disagree, believe the binary. A screenshot run is a matrix. Each cell is one device family, one locale, one appearance, and one screen of the app. The work is making every cell reach the same state, and making the chrome identical across all of them. ## Before starting, agree on the matrix Ask for anything not already specified: - **Device families.** App Store Connect wants specific sizes; confirm which. - **Locales**, if more than one. - **Appearance**: light, dark, or both. - **Screens**: the list of app states to capture, in order. - **Output layout**: where files go and how they are named. Write the matrix down before capturing. A run that discovers halfway through that it needed dark mode has to start over, because appearance is set before launch. ## Never wipe the fleet **Do not run `xcrun simctl shutdown all`.** Do not shut down or erase a Simulator you did not boot. Switching families is exactly where this is tempting, and a running Simulator on this machine may belong to unrelated work. Boot what you need, leave everything else alone, and shut down only what you booted, only after asking. ## Bind to one pane first Every pane-targeted verb fails when the tab holds more than one device pane: ``` deviceterm: multiple panes in this tab; pass --pane : 3eseb1 sim 4800b7e9-05f9-4c84-9c20-cf88857bb161 rpvgzr sim ee15455f-838b-4721-9794-dc51c29b6d8e ``` Exit 1, with no work done. Omitting `--pane` only works while exactly one pane is attached, which is not a state you control. Set both variables together, to the device you booted. `simctl` needs the UDID and deviceterm needs the pane, and they are the same value: ```sh UDID="" DT_PANE=$UDID ``` When you did not boot it yourself, list the panes and choose one: ```sh deviceterm panes list ``` Then set both to the UDID you mean. Taking the first row programmatically turns a loud disambiguation failure into a silent one, where the run drives whichever device sorted first and every later assertion is about the wrong screen. Hold the **UDID**, not the short ref. Refs are minted per mount, so a Simulator reboot reissues them and a ref baked into a script silently drives whatever pane inherits it later. ## Per-cell sequence Order matters. Appearance and status bar are set before the app launches, and the pane must be attached before deviceterm can drive it. ```sh # 1. Boot inside the tab so the shim attaches a pane. xcrun simctl boot "$UDID" # 2. Wait for the device, then for the pane. `simctl boot` returns once boot # has been *started*, so everything below would otherwise run against a # device that is still coming up: the status bar override and appearance # can be dropped, and the launch can fail outright. Neither is recoverable # later, and both produce a full directory of wrong images. xcrun simctl bootstatus "$UDID" -b deviceterm wait pane rendering --pane "$DT_PANE" # 3. Create the output directory. `simctl io screenshot` does not make one, # and fails on a path that does not exist. mkdir -p out/iphone-17-pro/light # 4. Freeze the chrome. Without this, every screenshot carries a different # clock and a different battery level, which App Store review notices. xcrun simctl status_bar "$UDID" override \ --time "9:41" \ --batteryState charged \ --batteryLevel 100 \ --cellularBars 4 \ --wifiBars 3 # 5. Appearance and locale. xcrun simctl ui "$UDID" appearance light # 6. Install and launch. xcrun simctl install "$UDID" /path/to/YourApp.app xcrun simctl launch "$UDID" com.example.YourApp # 7. Prove the screen is the one you mean, then that it has stopped moving, # then capture. Both waits are needed and neither substitutes for the # other: the label says *which* screen, quiescence says *when*. deviceterm wait ax --label "Home" --pane "$DT_PANE" deviceterm wait surface quiescent --pane "$DT_PANE" xcrun simctl io "$UDID" screenshot "out/iphone-17-pro/light/01-home.png" # 8. Then navigate, and confirm the new screen the same way. deviceterm tap --label "Browse" --role Button --pane "$DT_PANE" deviceterm wait ax --label "Categories" --pane "$DT_PANE" deviceterm wait surface quiescent --pane "$DT_PANE" xcrun simctl io "$UDID" screenshot "out/iphone-17-pro/light/02-browse.png" ``` **Quiescence alone is not a screen check.** It proves pixels stopped changing, which a static SpringBoard satisfies just as well as your launched app — so a slow launch yields a correctly named screenshot of the wrong screen, and a tap that lands without navigating yields `02-browse.png` showing the home screen. Wait for something only the intended screen has, then settle. Substitute a real label from the screen for `Home` and `Categories`. Capture before you tap, and name the file after the screen it actually holds. Writing a post-tap frame to `01-home.png` is one of the failure modes this skill exists to catch: every command succeeds, every file is present, and only the pictures are wrong. **Steps 4 and 5 are preconditions, so check they succeeded.** A silently failed `status_bar override` leaves the real clock and battery in every frame, which is exactly what that step exists to prevent and what App Store review notices. Run the block under `set -e`, or check each status. **If step 2 fails, diagnose before rerunning.** `wait pane rendering` blocks until the pane renders and exits 0; a cold boot gets there in about a second, well inside the 30000 ms default, and `--timeout ` moves the bound. Its exit code says which thing went wrong, which a hand-rolled poll cannot: 124 is the deadline, while transport, authentication and pane-resolution failures each keep their own code. A deadline usually means no pane was ever attached, not a slow boot. Check: ```sh deviceterm panes list ``` An empty list means the boot bypassed the shim, so no input will reach the device however long you wait. The `deviceterm` skill covers that diagnosis. A row is not readiness either: `state` is one of `booting`, `rendering`, `shutdown`, or `failed`, and **only `rendering` can answer input or an accessibility read**. ## Landscape Use the absolute form: ```sh deviceterm rotate landscape-left --pane "$DT_PANE" ``` The relative form, `deviceterm rotate left`, rotates from deviceterm's own last rotation. An app that forces its own orientation leaves that base stale, so relative rotations drift over a long run. Absolute is idempotent. After rotating, re-read coordinates. Normalized coordinates are in displayed space, so `(0,0)` is the top left of what the device is showing now, not of the portrait screen. ## Locales Locale is set at boot through the device's preferences, not by a deviceterm verb. Erasing and re-preparing a Simulator per locale is the usual approach, and it destroys that device's state, so use a Simulator created for this run rather than one the user already had. ## Navigating reliably Do not hardcode tap coordinates across families. A layout that centres a button on one screen size will not on another. Locate the control by its accessibility label each time: ```sh deviceterm tap --label "Browse" --role Button --pane "$DT_PANE" ``` That locates and taps in one command, so nothing family-specific is computed or stored. Name a `--role`: without one a small decorative node can outrank the control, and tapping it returns a clean receipt while changing nothing. When you need the coordinate rather than the tap, ask for it bare with `deviceterm wait ax --label "Browse" --role Button --print center --pane "$DT_PANE"`. Either way the normalization is the CLI's, computed against the root frame — do not divide frames yourself. The `deviceterm-app-verify` skill carries the full set of traps. ## Verify before moving to the next cell Read the screenshot back and confirm it shows the screen you meant. A capture of a loading spinner is still a successful `simctl io` call, and a matrix run compounds one wrong cell into a whole directory of them. Check the first cell of every family by eye before letting the rest of that family run. A full driver script covering families, appearances, landscape cells, and the four failure modes that produce successful commands and unusable files is in [references/matrix.md](references/matrix.md). Read it before scripting a run of more than a couple of cells.