# Triton Ascend Kernels > Provide guidance for writing and benchmarking optimized triton kernels for ascend npus(910B, 910C). Support models like Qwen, Deepseek and so on. The triton kernels could be integrated into vllm inference engine or used separately with torch. This skill should be used when the user asks to "write/optimize triton kernels" for Ascend NPUs. - Skill: `small-cat/triton-ascend-kernels` (Agent Skill, multi-file: 33 files) - Install (CLI): `npx skillmds@latest add small-cat/triton-ascend-kernels` - Raw SKILL.md: https://api.skillmd.com/api/skills/small-cat/triton-ascend-kernels/raw - Safety review: pending - Works with: Claude Code, Claude.ai, OpenAI Codex - Category: AI & ML - Author: small-cat (https://skillmd.com/u/small-cat) - Updated: 2026-09-22 - Page: https://skillmd.com/skills/small-cat/triton-ascend-kernels --- # Triton Kernel for Ascend NPU The skill provides patterns and guidance for developing and optimizing triton kernels targeting Ascend NPUs(910B, 910C) for models like Qwen, Deepseek and so on. ## Key Differences from NVIDIA GPU **Important**: NPU kernels are fundamentally different from CUDA kernels. Key differences: - **Device Type**: Use `npu` instead of `cuda`. Always check `torch.npu.is_available()` instead of `torch.cuda.is_available()` - **Memory Model**: NPU uses explicit on-chip buffers (UB, L1, L0A, L0B, L0C) instead of GPU's unified shared memory - **Alignment Requirements**: NPU buffers require strict alignment (UB: 32B, L0A/L0B/L0C: 512B, etc.) - **Data Flow**: GM-UB-Vector or GM-L1-L0A/L0B-Cube-L0C-FixPipe-GM patterns ## When This Skill Applies Use this skill when: - benchmarking kernel performance against baseline implementations - writing new triton kernels for ascend npus - optimizing existing triton kernels for ascend npus - debugging triton kernel performance issues on ascend npus ## Principles - **Correctness First**: After each modification, correctness verification and performance measurement must be conducted. - **Goal-Oriented**: Continue optimization until performance improvement reaches the target, without stopping iteration. - **Iterative Optimization**: Repeatedly modify, test, and iterate until the target is achieved. Before modifying Triton operator source code, be sure to back up to restore if needed. - **Precise Modification**: Pursue "surgical-level" precise modifications to avoid introducing new issues. ## Workflow **Step 1**: Analyze the existing code for optimizing the triton kernel or understand the user's requirement for writing a new kernel. If write a new kernel, clarify the input/output specifications, data types, and performance goals and goto step 3 directly. **Step 2**: Thoroughly analyze the operator's input parameters, data types, shape ranges, functional logic, and computation flow. Refer to [memory bound and compute bound analysis](./reference/memory-bound-vs-compute-bound.md) to evaluate the operator's compute intensity and memory access patterns, determining whether it is compute-bound or memory-bound to guide subsequent design and optimization. Wait for user confirmation after analysis is complete. **Step 3**: If writing a new operator, design the operator implementation flow, referring to [ascend npu hardware spec](./reference/ascend-npu-hardware-spec-constraints.md) and [triton npu best practices](./tutorial/README.zh.md). Proceed to subsequent steps after user confirms the design. If optimizing an existing operator, first run the functional test: ```shell python -m .test__verify ``` to verify correctness and precision. Then run the performance test: ```shell msprof op --output= --kernel-name="_kernel" python -m .test__perf ``` The `Task Duration(us)` in the output is the key performance metric; record it as the baseline performance. **Step 4**: If writing a new operator, implement the operator in `/.py` and create two test files — `/test__verify.py` for functional verification and `/test__perf.py` for performance testing — by referring to [triton benchmark guidance](./reference/kernel-benchmark-guidance.md). Run the commands above to verify functional correctness and performance metrics. If optimizing an existing operator, perform targeted optimization on `.py` based on the baseline analysis results. Ensure the performance improvement reaches at least x times (user's target), and the higher the better. Run the following tests: - Performance test (vs baseline): `msprof op --output= --kernel-name="_kernel" python -m .test__perf` - Correctness verification: `python -m .test__verify` **IMPORTANT**: Reference documents for iterative tuning - reference/ascend-npu-hardware-spec-constraints.md - reference/troubleshooting.md - tutorial/README.zh.md ## Project structure ``` . ├── SKILL.md # this file └── reference ├ ├── ascend-npu-hardware-spec.md # ascend npu hardware spec and restrictions for kernels ├ ├── kernel-benchmark-guidance.md # kernel benchmark guidance ├ └── memory-bound-vs-compute-bound.md # memory bound and compute bound analysis └── tutorial # the best practices for triton kernels on ascend npus ├── README.zh.md # introduction to the best practices ├── basic │   ├── 001-vector_add.py # Vector unit does not support int64; use int32 if precision is not affected │   ├── 001-vector_add.zh.md # Vector unit does not support int64; use int32 if precision is not affected │   ├── 002-vector_cmp.py # Cmp Op does not support int32/int64 vector operations; convert to FP32 if precision is not affected │   ├── 002-vector_cmp.zh.md # Cmp Op does not support int32/int64 vector operations; convert to FP32 if precision is not affected │   ├── 003-ub_overflow.py # Solve UB memory consumption via tiling to avoid UB overflow │   ├── 003-ub_overflow.zh.md # Solve UB memory consumption via tiling to avoid UB overflow │   ├── 004-discrete_memory_access.py # For small scattered memory access, load all into UB and filter with Gather semantics instead of single GM reads │   ├── 004-discrete_memory_access.zh.md # For small scattered memory access, load all into UB and filter with Gather semantics instead of single GM reads │   ├── 005-load_order.py # Move data load statements with no dependency on computation earlier to allow MTE2 instruction parallel dispatch │   ├── 005-load_order.zh.md # Move data load statements with no dependency on computation earlier to allow MTE2 instruction parallel dispatch │   ├── 006-tiling.py # Partition grid based on actual physical cores of Ascend hardware, and do tiling inside the kernel │   └── 006-tiling.zh.md # Partition grid based on actual physical cores of Ascend hardware, and do tiling inside the kernel ├── best_practice │   ├── 001-assign_req_to_token_pool.py │   ├── 002-decode_grouped_attention.py # When the tensor to load is contiguous in high dimensions and scattered in low dimensions, transpose to achieve vectorized loading │   ├── 002-decode_grouped_attention.zh.md # When the tensor to load is contiguous in high dimensions and scattered in low dimensions, transpose to achieve vectorized loading │   ├── 003-fused-cat-slice-conv1d.py # causal_conv1d_update operator optimization example │   ├── 003-fused-cat-slice-conv1d.zh.md # causal_conv1d_update operator optimization example │   ├── 004-gather_scatter.py │   ├── 005-binned_gather_scatter.py │   ├── 006-padded_gather_scatter.py │   └── utils.py └── op_extension ├── 001-insert_slice.py # Merge multiple data pieces together for batch processing to improve data handling efficiency ├── 001-insert_slice.zh.md # Merge multiple data pieces together for batch processing to improve data handling efficiency ├── 002-extract_slice.py # Batch read once, extract and process partial data to improve data handling efficiency ├── 002-extract_slice.zh.md # Batch read once, extract and process partial data to improve data handling efficiency └── 003-load_care_padding.zh.md # For masked data loading, explicitly specify default values for masked-out portions if not needed, to improve MTE2 and Vector parallelism ``` ## Best practices for triton kernels on Ascend NPUs The best practices for triton kernels on Ascend NPUs could see [triton npu best practices](./tutorial/README.zh.md) ## Question and Answer The question and answer for triton kernels on Ascend NPUs could see [troubleshooting](./reference/troubleshooting.md)