# Design > Use when D-000 exists and the whole-product prototype does not, to run Claude Design in its own context and produce the prototype and design system. Also use when a later slice exposes a design gap that needs a spine revision. Requests gate 2a (prototype approved at Claude Design). Never run in the builder's context, and never used to author tests, acceptance criteria, or application code. - Skill: `teklabsdigital/design` (Agent Skill) - Install (CLI): `npx skillmds@latest add teklabsdigital/design` - Raw SKILL.md: https://api.skillmd.com/api/skills/teklabsdigital/design/raw - Safety review: pending - Works with: Claude Code, Claude.ai, OpenAI Codex - Category: Design & Media - Author: teklabsdigital (https://skillmd.com/u/teklabsdigital) - Updated: 2026-09-17 - Page: https://skillmd.com/skills/teklabsdigital/design --- # X2 Design (Claude Design) Produce one whole-product prototype and its design system from the source of truth. This runs in its own context, deliberately separate from the builder: the pilot showed that when the builder is also the designer, the design steps collapse and acceptance criteria get authored backwards (turn 8). Design is done once for the whole product; each slice locks its portion later. ## Inputs - D-000: the story set, the recorded product decisions, the module shape, the slice definitions. - The behaviour spec beside it, if the product has one. The prototype must make that behaviour visible; it is the difference between designing the product and designing a generic UI. - The design brief, where one exists (required for a rich domain, see below). It governs the information architecture where it is more specific than the stories. ## The design brief (requirements-for-design in its positive shape) For a simple domain, the input beyond the stories is a thin note: novel-or-irreversible only. For a rich domain (many surfaces, typed variants, a domain model the stories do not carry), the method requires the brief, produced in the product working session with the human and approved by the human as a decision turn BEFORE this skill runs: 1. **The domain model is frozen as a decision first** (a D-0xx). The brief renders that decision; it cites it and never restates it. 2. **The brief carries exactly three kinds of content:** - Topology: the user journeys; the screen inventory, each surface stated as the problem it solves (a mini story) plus what it does; and the action edges (which action on which screen opens which screen, and what stays inline). - Shape: what each surface must expose, the editor kind each configured item wants (field, toggle, picker, prose document), and the depth rule (a row earns its own screen when its content is large, unbounded, or an editor; a few small fields stay inline). - Priority: the engagement tiers (what is glanced constantly, what is reached for in the moment, what is deliberately configured), because prominence is a product decision, not a styling one. 3. **Two disciplines the brief must state, both learned from real failures:** - Tables and matrices in the brief are DATA a surface reads, never screens to render; one shell reading data beats a view per variant. - The brief names every surface exhaustively. The designer builds the named surfaces and only those, and asks on a gap; a screen is never inferred from a table and UI is never invented around a hole. 4. **What the brief must NOT contain:** layout, visual hierarchy, components, palette, type (this skill's job); acceptance criteria or test cases (derived after the lock, MET-01); story restatement (the story set remains the authority on intent); fields the domain model does not back. ## Work in two steps 1. Propose the information architecture and a design direction (screen map, component set, palette and type direction). Where a brief exists, validate the proposal against it: every journey walkable through the proposed screens, every named surface present, no surfaces invented. Then confirm it with the human. Build nothing yet. 2. After confirmation, build the whole-product prototype and the design system, with behaviour annotations: short notes of what each screen and key element shows and does. Annotations are design notes, never acceptance criteria. ## What the artifact must be - **Whole-product, once.** Cover every screen and state across all stories, including the ones later slices will build, so the shell holds them without redesign. The design spine is the third stays-ahead asset, alongside D-000 and schema (MET-03). - **The token source in waiting.** The design system becomes the client's single token source, so it must be expressed as a clean variable set: more than fifty variables, both themes (the dark root and the light override). The kernel will hold the client to it (UI-1), ban literals outside it (UI-2), and test shipped screens against the locked prototype in both directions (UI-4). Build the prototype as the thing the client is held to. - **Distinctive.** Commit to a clear direction and execute it with intention; avoid generic AI-default aesthetics; distinctive type beats safe type. The project's recorded product decisions override style instinct (the pilot's: simple, clear, user-friendly beats feature density). ## Reuse Reusing a house design system from another product is legitimate and proven in the record. If you reuse, record where the system came from in the artifact so the lock can carry it (the provenance README is the home). The invariants pass ruled the home question: the imported system lives under `design/prototype/_ds/` per project; a shared cross-product home is deferred until a second product reuses the same system, at which point it becomes a pinned, hash-ledgered vendored asset (DEP-1), never a shared directory. ## The lock model The prototype is the spine; each slice locks its portion as that slice's acceptance contract and derives tests from that portion only. The spine can be revised when later slices expose gaps; a revision re-locks the affected portions and spends the approving human turn (open cadence question carried on the record, MET-03). Two disciplines the third project priced: - **A fault in a locked screen is fixed here and arrives via re-lock, never patched in the build.** The owner ruled it mid-project and it held: the artifact stays the single authority, and the build's comparisons stay honest. - **New states prefer a new screen.** Inserting states into a locked screen whose comparison is index-aligned churns every comparison below the insertion point; drawing them on an additive screen costs nothing. Measured both ways in the third project. ## Human-turn contract - The direction confirmation in step 1 is a design decision turn. - Requests **gate 2a: prototype approved at Claude Design** (MET-07), at the moment the prototype is complete. Approval here is not the lock; the lock happens after the copy-down, at lock. - Both requests are put in plain language, the owner's own words; method vocabulary rides alongside, never instead (P3). ## What this skill must NOT produce - No acceptance criteria, no test cases, no fidelity ledgers. Deriving those before the lock is the exact error the three-artifact separation exists to prevent (MET-01). - No application code, no kernel instantiation, nothing outside the design tree. - No restating of the stories into a new requirements document; D-000 is the source of truth. ## Next Gate 2a on record, then lock in the builder's context.