Auto Merge

${var} — Repo (owner/repo) to target. If empty, uses every repo in memory/watched-repos.md. Env: AUTO_MERGE_DRY_RUN=1 logs intent without merging. MAX_AUTO_MERGE=N caps merges per run (default 3).

Merge open PRs that are fully green and pass an explicit safety policy. The policy exists because this skill runs autonomously with write access — a bug in the gate is a bug that ships to main.

Read memory/MEMORY.md and memory/watched-repos.md for repos to target. Read the last 2 days of memory/logs/ to avoid re-logging PRs already merged.

Safety policy

A PR merges only when every one of the following holds:

• Author allowlist: author.login is one of dependabot[bot], renovate[bot], github-actions[bot], OR appears under a ## Trusted Authors section in memory/watched-repos.md. No allowlist → only the three bot logins are eligible.
• Size cap: additions + deletions ≤ 500. Override by applying the label auto-merge-large on the PR.
• Base branch: baseRefName is main or master. Refuse any other target.
• Not a fork: isCrossRepository == false (fork CI can be tampered with).
• Not draft: isDraft == false.
• Not already queued: autoMergeRequest == null (avoid fighting GitHub's native auto-merge if a human enabled it).
• No opt-out label: none of {do-not-merge, wip, hold, needs-review, blocked} present.
• Mergeable state: mergeStateStatus == "CLEAN" (this is stricter than mergeable == "MERGEABLE" — CLEAN additionally requires branch-protection gates to be satisfied).
• Reviews: reviewDecision != "CHANGES_REQUESTED".
• Checks: every entry in statusCheckRollup has conclusion in {SUCCESS, NEUTRAL, SKIPPED}. Any FAILURE, TIMED_OUT, CANCELLED, PENDING, or null conclusion disqualifies the PR.
• Retry cap: this PR has been attempted fewer than 3 times. A PR that has hit MERGE_FAIL three times across runs is paused — repeated failure on a CLEAN-looking PR usually means something subtle (a required check that didn't surface, branch-protection drift, token scope drift). Surface it and stop looping.

Steps

0. Bootstrap state — per-PR retry counter lives in memory/topics/auto-merge-state.json:

   mkdir -p memory/topics
   [ -f memory/topics/auto-merge-state.json ] || echo '{"prs":{},"last_run":null}' > memory/topics/auto-merge-state.json
   

   Schema:

   {
     "last_run": "2026-05-23T08:00:00Z",
     "prs": {
       "owner/repo#123": {
         "first_seen": "2026-05-21T10:00:00Z",
         "last_attempt": "2026-05-23T08:00:00Z",
         "attempts": 2,
         "last_outcome": "merge_failed",
         "last_error": "Pull Request is in unstable state"
       }
     }
   }
   

   PR keys are <owner>/<repo>#<number> so state survives multi-repo runs. Cap to 50 most-recent entries (LRU by last_attempt). Validate with jq empty after write; restore from .bak on failure.

1. List open PRs for each watched repo with the full field set:

   gh pr list -R owner/repo --state open --json number,title,author,isDraft,mergeable,mergeStateStatus,reviewDecision,statusCheckRollup,autoMergeRequest,isCrossRepository,labels,additions,deletions,baseRefName
   

2. Handle UNKNOWN state — GitHub computes mergeStateStatus lazily. If a PR returns UNKNOWN, sleep 3 seconds and re-query once:

   sleep 3 && gh pr view NUMBER -R owner/repo --json mergeStateStatus,mergeable,statusCheckRollup
   

   If still UNKNOWN after the retry, skip the PR with reason UNKNOWN-persistent and let the next run retry.

3. Apply the safety policy to each PR. Record a verdict for every PR: either MERGE or SKIP:<specific-reason>. Reasons must name the failing gate — e.g. SKIP:author-not-allowlisted:contributor123, SKIP:size-cap:823-lines, SKIP:mergeStateStatus=BEHIND, SKIP:label:do-not-merge, SKIP:check-failed:lint, SKIP:retry-cap:3-attempts. Vague reasons like SKIP:not-ready are not acceptable.

4. Merge qualifying PRs, up to MAX_AUTO_MERGE (default 3):

   • If AUTO_MERGE_DRY_RUN=1, log DRY_RUN:would-merge #N and continue — do NOT invoke merge.
   • Otherwise:

     gh pr merge NUMBER -R owner/repo --squash --delete-branch
     

     Increment state.prs["<owner>/<repo>#<N>"].attempts on every attempt regardless of outcome. Set first_seen if absent. Reset to 0 (delete the entry) for PRs that no longer appear in the open list (already merged or closed since the last run). If the merge fails (non-zero exit), capture stderr and log MERGE_FAIL #N: <stderr>. Record last_outcome: merge_failed and last_error: <stderr ≤200 chars> on the state entry. A failed merge does NOT count toward the per-run MAX_AUTO_MERGE cap — continue to the next qualifying PR. A PR whose attempts has reached 3 is filtered out in step 3 with SKIP:retry-cap:3-attempts; surface it in step 5b instead of retrying.

5. Send a notification only when at least one real (non-dry-run) merge succeeded or at least one PR has hit the retry cap (5b below). No merges and no cap hits → no notification, just a log entry.

   5a. At least one merge succeeded:

   *Auto Merge — ${today}*
   Merged N PR(s) on owner/repo:
   - #123: PR title (+45/-12, by @author) — squash merged abc1234
   Queue cleared. Self-improve cycle unblocked.
   

   5b. Retry cap reached on ≥1 PR (AUTO_MERGE_RETRY_CAP) — include in the same message if both fire, otherwise stand-alone:

   *Auto Merge — retry cap*
   Hit retry cap (3 attempts) on:
   - owner/repo#40 — last error: "Pull Request is in unstable state"
   Stopping auto-merge attempts on this PR. Investigate manually.
   

   Dedup: suppress re-notify if the exact same set of cap-hit PR keys already notified within the last 24h (grep memory/logs/ for prior AUTO_MERGE_RETRY_CAP entries).

6. Persist state — write the updated memory/topics/auto-merge-state.json. Update last_run to current timestamp. Validate with jq empty; on failure restore from a .bak written before this run.

7. Log to memory/logs/${today}.md under an ### auto-merge heading:

   • Mode: live | dry-run
   • Repo(s): list
   • Merged: #N title @author +A-D SHA per line
   • Skipped: #N SKIP:<reason> per line
   • Retry-capped: owner/repo#N — <last_error> per line (empty if none)
   • Totals: merged=X qualified=Y considered=Z retry_capped=R
   • If zero qualified, include a verdict breakdown: AUTO_MERGE_SKIP: 0/Z qualifying (behind=B blocked=L failing=F draft=D author-blocked=A size-blocked=S retry-capped=R)

Network note

gh authenticates via the workflow's GITHUB_TOKEN — no curl needed. If gh pr merge fails with Resource not accessible by integration, the workflow token lacks merge permission on that repo; log once and notify at most once per 7 days (check memory/logs/ for prior notification) to avoid alert spam.

Constraints

• Never merge a PR whose author is not allowlisted, even if every other gate is green.
• Never bypass the size cap without the explicit auto-merge-large label (set by a human, not a bot).
• Never auto-retry a MERGE_FAIL within the same run — if the first merge attempt fails, log and move on.
• After 3 failed attempts across runs, stop retrying that PR. Surface it once via the retry-cap notification and let the operator investigate.
• Do not modify PR state other than merging (no comments, no label edits, no branch updates).

Running this as an agent-shipping loop

To close the loop on PRs the agent itself opens (from feature, external-feature, self-improve, etc.), add the agent's GitHub identity under a ## Trusted Authors section in memory/watched-repos.md:

## Trusted Authors
- aeon-bot
- claude-code[bot]

Once allowlisted, agent PRs flow through the same safety policy as bot PRs and get auto-merged on green CI. The retry cap protects against runaway behavior on a stuck PR.