Routeros Hotspot

RouterOS Hotspot

How Hotspot Chains Work

Hotspot traffic intercept runs before the regular firewall input/forward chains. This is the single most important fact to internalize:

• /ip/hotspot binds to a bridge or interface — all traffic on that interface enters the hotspot chain first
• Firewall rules blocking TCP 80/443 from the hotspot interface do NOT block the captive portal login page — hotspot handles it before the firewall sees it
• RouterOS automatically injects dynamic firewall rules (hs-unauth, hs-auth chains) — do not manually create, remove, or interfere with these hotspot-managed rules

Common mistake: Adding a DROP rule for port 443 from bridge-hotspot to "fix a security gap" — this breaks the HTTPS login page silently.

Hotspot Profile

/ip/hotspot/profile/add \
  name=my-profile \
  hotspot-address=10.20.0.1 \
  login-by=https,mac,http-pap \
  mac-auth-mode=mac-as-username-and-password \
  dns-name=login.example.com \
  ssl-certificate=login.example.com.crt_0 \
  nas-port-type=ethernet \
  use-radius=yes \
  radius-accounting=yes \
  html-directory-override=hotspot-files

Key properties:

• ssl-certificate= — reference the name after import (RouterOS appends _0 to imported certificate names)
• nas-port-type= — use ethernet for wired hotspots and wireless-ieee-802-11-g for wireless hotspots
• html-directory-override= — must match the exact folder name on the router's filesystem
• login-by=https — serves the login page over HTTPS; requires www-ssl service enabled with the same certificate
• use-radius=yes — when set, local /ip/hotspot/user entries are bypassed; adding them has no effect

Hotspot Instance

/ip/hotspot/add \
  name=hotspot1 \
  interface=bridge-hotspot \
  profile=my-profile \
  address-pool=pool-hotspot \
  addresses-per-mac=2 \
  idle-timeout=5m \
  keepalive-timeout=none \
  disabled=no

Note: keepalive-timeout=none disables the keepalive. keepalive-timeout=0 is NOT valid — it is ignored.

Note: RouterOS hotspot relies on NAT and is IPv4-only. IPv6 clients are not supported by the hotspot subsystem.

DHCP Option 114 — Captive Portal API (RFC 8910)

Option 114 (standardized 2020, RFC 8910) signals the captive portal URI to clients. It is underrepresented in LLM training data.

# force=yes is REQUIRED — without it, clients whose DHCP Parameter Request
# List does not include code 114 (e.g. iOS, Android) silently skip the option
/ip/dhcp-server/option/add \
  name=captive-portal \
  code=114 \
  force=yes \
  value="'https://login.example.com/api'"

/ip/dhcp-server/option/sets/add \
  name=captive-portal-set \
  options=captive-portal

/ip/dhcp-server/set my-dhcp-server dhcp-option-set=captive-portal-set

Option value syntax: outer double quotes, inner single quotes — "'https://...'". Missing inner quotes cause the option to be sent as a binary blob, not a string URI.

api.json timing: RouterOS creates hotspot/api.json only after the first client CAPPORT probe — not at hotspot enable time. Move it to the html-directory-override folder after first client connects:

# Handles both flash/ and non-flash storage layouts
:local srcPath "hotspot/api.json"
:local dstPath "hotspot-files/api.json"
:if ([:len [/file find name="flash"]] > 0) do={
  :set srcPath "flash/hotspot/api.json"
  :set dstPath "flash/hotspot-files/api.json"
}
:if ([:len [/file find name=$srcPath]] > 0) do={
  /file set [find name=$srcPath] name=$dstPath
} else={
  :log warning "api.json not yet created — run after first client CAPPORT probe"
}

Walled Garden

Use a consistent comment= tag for idempotent add/remove. Without it, repeated script runs accumulate duplicate entries.

# Remove only our entries, not manually-added ones
/ip/hotspot/walled-garden/ip/remove [find comment="my-wg"]

/ip/hotspot/walled-garden/ip/add dst-host=example.com   action=accept comment="my-wg"
/ip/hotspot/walled-garden/ip/add dst-host=*.example.com action=accept comment="my-wg"

IP vs HTTP walled garden:

• /ip/hotspot/walled-garden/ip — layer 3 match by destination host, applied BEFORE authentication. Use for HTTPS destinations.
• /ip/hotspot/walled-garden — layer 7 URL pattern match, requires HTTP. Does NOT work for HTTPS.

SSL Certificate Note

The hotspot profile references ssl-certificate=name.crt_0 (RouterOS appends _0 on import). Enable www-ssl with the same certificate:

/ip/service/set www-ssl disabled=no certificate=login.example.com.crt_0 tls-version=only-1.2

Quick import pattern:

/certificate import file-name=login.example.com.crt passphrase=""
/certificate import file-name=login.example.com.key passphrase=""
# After import, the certificate appears as login.example.com.crt_0

External Captive Portal — HTML Template Variables

RouterOS substitutes $(variable) server-side in any file under html-directory-override before serving it. These are not JavaScript variables — they are filled before the browser receives the page.

Servlet pages RouterOS serves (drop your own to override): login.html, flogin.html (failed-login), alogin.html (post-success), status.html, logout.html, error.html, redirect.html, rlogin.html, rstatus.html, fstatus.html, flogout.html, radvert.html, md5.js, errors.txt. Most external-CP setups only need login.html + alogin.html + status.html.

Most-used variables for external CP:

Always pick the -esc variant ($(link-orig-esc), $(mac-esc), $(username-esc)) when embedding a value into a URL or query string. The non-escaped variants will break parsing or open injection paths if the value contains &, =, ?, #.

POST form fields RouterOS accepts at $(link-login-only): username, password, domain, dst, popup, session-id, var, erase-cookie, target (multi-language subdir).

Conditional syntax (server-side, not JavaScript):

$(if logged-in == "yes")
  <a href="$(link-logout)">Logout</a>
$(else)
  <form action="$(link-login-only)" method="post">...</form>
$(endif)

Operators: presence ($(if VAR)), ==, !=. Also $(elif ...). No nested arithmetic / string ops.

Generic login.html pattern for external captive portal:

<!DOCTYPE html>
<html>
<head>
  <meta charset="utf-8">
  <meta http-equiv="pragma" content="no-cache">
  <meta name="viewport" content="width=device-width, initial-scale=1">
  <!-- External auth provider loads redirect logic -->
  <script src='https://auth.example.com/snippets/router-os/redirect'></script>
</head>
<body>
  <div id="entryPoint">Redirecting...</div>
  <script>
    window.addEventListener('load', function () {
      ExternalAuth_redirect(
        '$(server-name)', '$(mac-esc)', '$(link-login-only)',
        '$(link-orig-esc)', '$(error-orig)', '$(logged-in)', '$(ip)'
      );
    });
  </script>
</body>
</html>

The external provider authenticates the user and redirects the browser back to $(link-login-only) with username + password + dst POST fields. RouterOS validates (local DB or RADIUS), issues the auth cookie, and redirects to dst.

Walled-garden must include the external auth host (and any CDN/asset hosts) — otherwise the unauthenticated browser cannot reach the redirect script in step 2.

Full variable reference, all servlet pages, RADIUS pass-through patterns, multi-language target= mechanics, and HTTP response control: see references/template-variables.md.

Common LLM Mistakes

Additional Resources

Related skills:

• routeros-fundamentals — RouterOS CLI syntax, REST API, scripting basics
• routeros-certificates (in backlog) — for the full certificate chain handling pattern

MCP tools:

• rosetta MCP server — /tool/ping, /ip/hotspot command tree inspection (routeros_search, routeros_get_page)

MikroTik docs:

• HotSpot — official reference
• DHCP Server — option 114 configuration

RADIUS Integration

See references/radius-client.md for RADIUS client configuration patterns.