Altium Validation

altium-cli Format Validation

Cross-reference the code against the documentation and Altium source to find mismatches. This is NOT a code-quality review — it checks whether our implementation matches the documented format specification and the original Altium source code.

When you find ambiguity (docs say one thing, C# says another, or neither is clear), ask the user rather than guessing. Flag ambiguities separately from definite errors.

For each finding, report:

1. Rule violated (by name from the checklist)
2. Code location (file:line)
3. Documentation or source reference (doc file + section, or C# file + class/method)
4. What's wrong (concrete description of the mismatch)
5. Suggested fix (or "AMBIGUOUS — needs user decision" with the options)

At the end, give a summary: total findings grouped by category (MISMATCH / GAP / AMBIGUITY).

Validation Checklist

MISMATCH — Code contradicts documentation or Altium source

V1: Record Type Enum Completeness

The SchRecordType and PcbObjectId enums must cover all documented record types. Check:

• Compare SchRecordType variants in altium-format-types/src/sch.rs against the record table in docs/dxp/schematic-records.md
• Compare PcbObjectId variants in altium-format-types/src/pcb.rs against the object ID table in docs/dxp/pcb-records.md
• Compare both against the C# source in AD26-dotnet/ (grep for SchRecordType, TObjectId, or the relevant enum)
• Every documented record type must have an enum variant, even if parsing isn't implemented yet

V2: Constant Values Match Source

Every constant in altium-format-types/src/constants/ must match the authoritative source. Check:

• Parameter key strings against FileFormatConsts.cs in AD26-dotnet/Altium.Sch.DataModel/Altium.Sch.DataModel.FileFormats/
• Bitmask values and shifts against the C# or Delphi source
• Stream name constants against docs/dxp/container-format.md and docs/dxp/sch-files.md
• Magic numbers (block size mask, instruction bytes, etc.) against docs/dxp/container-format.md
• Method: For each constants module, sample 5-10 constants and verify them against the C# source

V3: Parameter Keys Per Record

Each record struct's #[param(key = "...")] attributes must use the correct parameter keys. Check:

• Cross-reference each record struct's param keys against the corresponding section in docs/dxp/schematic-records.md or docs/dxp/pcb-records.md
• Cross-reference against the C# FileFormatConsts.cs constants for that record type
• Look for typos, case mismatches, or wrong keys (parameter keys are case-insensitive in Altium, but our constants should match the canonical casing from C#)

V4: Parameter Types Match Format

Each parameter must be deserialized into the correct type for how Altium encodes it. Check:

• Coordinate fields use Coord with both integer and _FRAC companion (per docs/dxp/coordinates.md)
• Color fields use Color type (Win32 COLORREF 0x00BBGGRR per docs/dxp/coordinates.md)
• Boolean fields parsed from "T"/"F" strings, not integer 0/1 (unless the specific field uses integer encoding)
• Enum fields use the correct variant mapping (cross-reference with C# enum definitions)
• RECORD field dispatched as SchRecordType (and RECORD >= 256 handled via RECORD=254 + RECORDEX)

V5: Dispatch Coverage

The record dispatch function must have a case for every implemented record type. Check:

• dispatch_record() in schlib.rs (or equivalent) against the SchRecordType enum
• Every enum variant that has a corresponding struct definition must be dispatched
• Unimplemented variants should produce an explicit error, not be silently skipped
• Compare dispatch branches against the documented record table

V6: Stream Names and Layout

CFB stream names and document structure must match the documentation. Check:

• Stream name constants in altium-format-types/src/constants/streams.rs against both the cross-cutting docs (docs/dxp/sch-files.md, docs/dxp/pcb-files.md, docs/dxp/container-format.md) and the domain-specific docs:
  • SchLib: docs/schlib/ describes the /FileHeader, /Storage, /SectionKeys, component /Key/Data + /Key/Additional layout
  • SchDoc: docs/schdoc/ describes the SchDoc stream structure
  • PcbLib: docs/pcblib/ describes the PcbLib stream structure
• Sidecar stream names and load order against docs/dxp/sidecar-streams-deep-dive.md AND the domain docs (domain docs may have more detail on specific sidecar handling)

V7: Sidecar Merge Behavior

Sidecar stream merging must follow the documented rules. Check:

• Pin sidecar stream list (PinFrac, PinDesc, PinMiscData, PinTextData, PinWideText, PinSymbolLineWidth, PinPackageLength, PinPropagationDelay, PinFunctionData) against docs/dxp/sidecar-streams-deep-dive.md
• Merge precedence rules (e.g., PinWideText is authoritative over PinDesc)
• Sidecar load ordering matches documentation
• WideStrings format: PcbLib uses parameter-block format, PcbDoc uses binary TLV — verify code handles the distinction

V8: Binary Layout Accuracy

For binary records (PCB), field offsets, sizes, and byte order must match. Check:

• Binary reader field order against the documented struct layout in docs/dxp/pcb-records.md
• Endianness (always little-endian per docs)
• Padding bytes accounted for
• Total record size matches documentation

GAP — Code is missing something the documentation describes

V9: Missing Record Fields

Documented fields that aren't implemented in the corresponding struct. Check:

• For each implemented record struct, list its fields
• Compare against the documented parameters for that record type in docs/dxp/schematic-records.md or docs/dxp/pcb-records.md
• Compare against the C# class fields for that record type
• Any documented field not in the struct is a gap (unless there's a justified reason)

V10: Missing Constants

Constants documented or present in FileFormatConsts.cs that aren't defined in altium-format-types/src/constants/. Check:

• Systematically compare each constants module against its C# source section
• Look for TODO comments indicating known gaps
• Check that constant modules cover all the categories in FileFormatConsts.cs

V11: Undocumented Code

Code that implements format behavior not described in any documentation. This is a docs gap. Check:

• Record types or fields parsed in code but not documented in docs/dxp/
• Special-case handling (workarounds, quirks) without corresponding documentation
• Magic numbers or format quirks in code without explanation
• This is less critical than code gaps but should be flagged for documentation

AMBIGUITY — Unclear or contradictory specification

V12: Documentation vs C# Source Conflict

When docs say one thing and the C# (or Delphi) source says another. Report:

• The documentation claim (with file + section reference)
• The C# source behavior (with file + class/method reference)
• Both possible interpretations
• Ask the user which is correct — do NOT guess

V13: Underdetermined Format Behavior

Format details that are genuinely unclear from available sources. Report:

• What is known about the field/behavior
• What is ambiguous
• What evidence exists for each possibility
• Ask the user to investigate further or make a decision

V14: Version-Dependent Behavior

Format features that differ across Altium Designer versions. Report:

• Which versions behave differently
• How the code currently handles it
• Whether the code should target a specific version or handle multiple

How to Validate

1. Determine scope

If the user specifies a scope, use it. Otherwise, validate the most critical areas first:

Priority order:

1. Record type enums (V1) — quick, high-value check
2. Dispatch coverage (V5) — ensures all defined types are wired up
3. Constant values (V2, V10) — spot-check against C# source
4. Parameter keys per record (V3) — validates the core parsing layer
5. Stream names and layout (V6) — validates document structure
6. Sidecar merge behavior (V7) — validates the tricky sidecar layer
7. Missing fields (V9) — thorough but time-consuming
8. Binary layouts (V8) — relevant once PCB parsing is further along

Acceptable scope specifiers from the user:

• "records" — focus on V1, V3, V5, V9 (record types, fields, dispatch)
• "constants" — focus on V2, V10 (constant values and coverage)
• "streams" — focus on V6, V7 (CFB structure and sidecars)
• "pcb" or "sch" — focus on one domain
• A specific record type (e.g., "Pin", "RECORD=2") — deep-dive that one record
• A specific file — validate just that file
• No argument — run the priority order top-to-bottom, stopping after significant findings to report

2. Cross-reference methodology

For each check, reference three sources when available:

The domain docs (docs/schlib/, docs/schdoc/, docs/pcblib/) often contain more detailed and up-to-date information than the cross-cutting docs/dxp/ files. Always check the domain-specific docs for the format you're validating:

• Validating SchLib code → check docs/schlib/ first, then docs/dxp/
• Validating SchDoc code → check docs/schdoc/ first, then docs/dxp/
• Validating PcbLib code → check docs/pcblib/ first, then docs/dxp/

When all sources agree: no finding. When code != docs (either format docs or domain docs): MISMATCH. When code is missing something from docs or source: GAP. When format docs != domain docs, or docs != Altium source: AMBIGUITY — ask the user. When domain docs and format docs contradict each other: AMBIGUITY — the domain docs are likely more recent, but ask the user to confirm.

3. Efficient search patterns

4. Report findings

Group by category (MISMATCH first, then GAP, then AMBIGUITY):

## Findings

### MISMATCH

**V2: Constant Values Match Source** — `altium-format-types/src/constants/pin.rs:15`
Constant `PIN_CONGLOMERATE_HIDE_DESIGNATOR_MASK` is `0x08` but `FileFormatConsts.cs`
(line 234) defines `SchPinDesignatorVisibleMask = 0x10`.
**Ref**: `AD26-dotnet/.../FileFormatConsts.cs:234`
**Fix**: Change to `0x10`.

### GAP

**V9: Missing Record Fields** — `altium-format/src/sch_records.rs` `SchPin` struct
The Pin record is documented to have `PINLENGTH_FRAC` (fractional companion for pin
length) in `docs/dxp/schematic-records.md` section "Pin (RECORD=2)", but the struct
has no `_FRAC` field for pin length.
**Ref**: `docs/dxp/schematic-records.md` → Pin section; `FileFormatConsts.cs:198`
**Fix**: Add `pin_length_frac` field with `#[param(coord, frac_key = "PINLENGTH_FRAC")]`.

### AMBIGUITY

**V12: Documentation vs C# Source Conflict** — Pin `PINCONGLOMERATE` bit 4
Our docs (`docs/dxp/schematic-records.md`) say bit 4 means "pin name visible", but
`FileFormatConsts.cs` calls this bit `SchPinDesignatorVisible`.
**Options**: (a) docs are wrong, bit 4 = designator visible; (b) C# naming is misleading
and it really is pin name. Need user to verify against actual Altium UI behavior.

## Summary

| Category   | Count |
|------------|-------|
| MISMATCH   | 1 |
| GAP        | 1 |
| AMBIGUITY  | 1 |
| **Total**  | **3** |

5. Handling ambiguity

When you encounter something ambiguous:

• Do NOT silently pick an interpretation
• Present both interpretations with evidence
• Use AskUserQuestion to get a decision if the ambiguity is blocking
• If it's non-blocking, list it in the AMBIGUITY section and move on

6. If no findings

Explicitly state: "No format validation issues found in the reviewed scope." and list what was checked against what sources.

=====

Extra instructions from user: $ARGUMENTS