Hyperloom.inference Optimizer.multi Node

Multi-Node Skill (infera + rayjob backends)

The cluster is not created here. The platform provisions it (an InferaDeployment or a RayJob) before the optimizer starts and hands it over through the HYPERLOOM_MN_EXT_* env vars (see "Cluster hand-off"). This CLI drives an already-running cluster and never creates or tears one down; the platform reclaims it when the session ends.

Drive every action through the Python CLI. Never ray.init, kubectl, or raw curl to a pod. All state lives in the file resolved from $MULTI_NODE_STATE_FILE, else $INFERENCE_OPTIMIZER_CURRENT_SESSION_DIR/runtime/multi_node_state.json — one of the two MUST be set or the CLI raises (sandbox-local; synthesized from the hand-off env on first use, rewritten by each subcommand). Re-read it every turn — never cache service_url / head_pod_ip across actions (a re-provisioned cluster rewrites them).

Bypassing loses exit-2 + MULTI_NODE_FAILURE_SNAPSHOT={…} failure detection, cross-subcommand state, and BENCHMARK_BASE_URL plumbing for Magpie.

Backends

Select via optimize --mn-backend {infera|rayjob} (default rayjob) or $INFERENCE_OPTIMIZER_MN_BACKEND. Only active when --nodes >= 2; single-node runs are unaffected. restart-server / kill-inference auto-route by state.backend.

infera — InferaDeployment with SSH as the control plane. GPU pods deploy idle (mn-idle.sh → sshd + block); restart-server SSHes in to relaunch infera.engine.{sglang,vllm}, so the aiter JIT cache survives restarts. No bootstrap / verify step. Benchmarks target the Infera frontend :8000 (state.service_url), never sglang rank-0.

• Image must carry the sshd layer (mn-sshd-init.sh, started by mn-idle.sh); sshd runs on $MN_SSH_PORT (base 2233, not 22 — avoids colliding with node sshd on :2222). Under hostNetwork each GPU role binds a distinct port — prefill/worker 2233+N, decode 2243+N (via LWS_WORKER_INDEX) — so co-located roles don't collide.
• Aggregated (default): serviceRoles=[frontend, worker], worker.replica = nodes.
• PD-disaggregated: --pd-mode disaggregated --pd-prefill-nodes N --pd-decode-nodes M [--pd-prefill-tp/--pd-decode-tp] → serviceRoles=[frontend, prefill, decode]. A role becomes a multi-node LeaderWorkerSet only when its TP exceeds one pod's GPUs.

rayjob — RayJob driven via the Ray Dashboard (:8265 submit, :6379 GCS); no SSH. Uses bootstrap → verify → restart-server (below).

The topology (aggregated vs PD, per-role TP/EP, image, RDMA) is fixed by the platform at provision time; the flags here only describe what restart-server launches on the pods it was handed.

Cluster hand-off (env-provided)

HYPERLOOM_MN_EXT_SERVICE_URL is what marks a cluster as available: without it a --nodes >= 2 run has nothing to drive and exits 2.

Common (both backends)

infera (--mn-backend infera)

infera requires SSH (_SSH_KEY + ≥1 *_IPS); missing → fails fast (exit 3, config error), no degrade.

Which list is read is decided by $PD_MODE alone, never guessed from which lists you set: unset means aggregated, so a PD cluster that exports _PREFILL_IPS / _DECODE_IPS without PD_MODE=disaggregated reads as having no GPU pods at all. optimize exports it from --pd-mode; a standalone hyperloom-mn subcommand needs it in the environment.

rayjob (--mn-backend rayjob) — ignores the infera _SSH_* / *_IPS vars.

Companion vars (set by optimize from CLI flags; usually leave alone): INFERENCE_OPTIMIZER_NODES, INFERENCE_OPTIMIZER_GPUS_PER_NODE, PD_MODE, PD_PREFILL_NODES / PD_DECODE_NODES, INFERENCE_OPTIMIZER_MN_BACKEND.

Example (infera PD-disaggregated):

export HYPERLOOM_MN_EXT_SERVICE_URL=http://<frontend-host>:8000
export HYPERLOOM_MN_EXT_PREFILL_IPS=<prefill-ip> HYPERLOOM_MN_EXT_DECODE_IPS=<decode-ip>
export HYPERLOOM_MN_EXT_SSH_KEY=/path/to/id_ed25519
inference_optimizer optimize --model <path> --nodes 2 \
  --mn-backend infera --pd-mode disaggregated --tp 8 --ep 8 ...

Example (rayjob with per-round restart):

export HYPERLOOM_MN_EXT_SERVICE_URL=http://<ray-serve-or-head-url>:<port>
export HYPERLOOM_MN_EXT_HEAD_IP=<ray-head-svc-host>
inference_optimizer optimize --model <path> --nodes 2 --mn-backend rayjob --tp 8 --ep 8 ...

Subcommands

# rayjob only — infera skips these two:
python3 -m hyperloom.inference_optimizer.multi_node bootstrap [--print-logs]  # verify /opt/venv + write PATH env on head
python3 -m hyperloom.inference_optimizer.multi_node verify                    # check `ray` on PATH on head
# both backends:
python3 -m hyperloom.inference_optimizer.multi_node restart-server --framework <sglang|vllm> --model <path> --tp <N> [--ep <N>] [--extra-args "…"]
python3 -m hyperloom.inference_optimizer.multi_node kill-inference

Run <subcommand> --help for the full flag set. Do not invent flags. There is no create/stop subcommand. Issue ONE restart-server per framework / model / TP / flag change — the CLI fans out across all pods; never per-pod invocations.

If you are running the optimize CLI (handed --target-gain / --max-hours / --isl/--osl/--conc FLAGS), optimize performs the entire flow internally (adopt cluster → bootstrap → restart per round). Run optimize ONLY — do not also run standalone bootstrap / restart-server alongside it, or the two resolve different state files and fight over the pods. The manual subcommands are only for driving a cluster without optimize.

Prompt → CLI mapping (do not re-ask; do not repeat in chat)

Sandbox-only exports (consumed by install.sh / optimize / _workload_envs.py in the sandbox; never ask the platform to bake them into pod env — nothing in the pods reads them, and they shadow real pod values): KERNEL_AGENT_BUILD_GEAK_RAG_INDEX, KERNEL_OPT_*, RANDOM_RANGE_RATIO, RUN_EVAL, the optimize-flag mirrors (MODEL_PATH, TP, EP, …), all PD_* knobs, and HYPERLOOM_MN_POLL_TIMEOUT_S / HYPERLOOM_MN_HEALTH_WAIT_S.

KV transfer backend (PD)

--pd-transfer-backend selects the PD KV plane, on optimize or directly on restart-server; optimize mirrors it to $PD_TRANSFER_BACKEND, which later rounds fall back on. There is no state-file source: the cluster is handed over rather than created here, so nothing records a backend on your behalf.

Leaving it unset is fine, and usually right. The flag is then simply not passed and sglang applies its own default, which on the RoCE/bnxt fabric is mooncake -- the one to prefer here, since it auto-detects the RDMA device. Set the flag only to move off that: nixl returns HTTP 200 but 0 output tokens (decode KV handoff via UCX/nixl fails), and mori is an alternative but not the sglang default here.

Poll budget (MoE JIT cold-start)

First restart-server on a large MoE often needs 20–30 min (weight load + aiter JIT), but the default per-invocation poll is ~110s. Export before restart-server / optimize --nodes >= 2:

export HYPERLOOM_MN_POLL_TIMEOUT_S=1800
export HYPERLOOM_MN_HEALTH_WAIT_S=1800

On timeout, re-run the same subcommand (no while sleep wrapper); restart-server checkpoints last_restart_submission_id and resumes the in-flight launch (MULTI_NODE_RESTART_RESUME_RUNNING=1, default).

Hard Rules

• Sandbox never runs the inference server. When nodes >= 2, sglang/vllm live only on the pods; the sandbox is the client. Every Magpie launch MUST inherit BENCHMARK_BASE_URL=<state.service_url> (forces PHASE=client). Missing it → Magpie runs sglang.launch_server on the CPU sandbox → ModuleNotFoundError. Fix orchestrator env propagation; never pip install sglang in the sandbox.
• Credentials stay in the sandbox — never forward LLM keys into pod env / bootstrap.sh, never pass keys on the command line.
• No Ray Python client in the orchestration layer — multi_node/ uses Ray Dashboard REST only, never import ray / ray.init(address=…) against the inference RayJob. (Code running inside RayJob pods is exempt.)
• Kernel-agent fan-out — kernel edits in the sandbox do NOT reach the pods (per-pod local fs). Use apply-patch / revert-patch / kernel-bench (route by state.backend; on infera GEAK runs on a GPU pod over SSH, installed once per cluster via install-geak). The integrate path auto-restarts the server after apply-patch — do not restart manually.
• Robustness runs the real agent on nodes >= 2, with LocalProbe off. The probe only sees sandbox-local resources, so on multi-node every probe-derived symptom (ray_head_dead, local_server_unreachable, gpu_memory_leaked, …) would be a false positive; disable_local_probe defaults to True there and swaps the probe for a silent stub. What remains is the node-agnostic set the agent reads straight off the Coordinator prompt and inbox: the deadline / budget ladder, gain_plateau, no_levers_found, crash escalation, phase_budget_nearly_exhausted, plus the inbox-driven agent_stall / repeated_failure / repeated_policy_denied family. Pass --robustness-mock for idle-only. Shell-level health monitoring (optimizer_runs/robustness_monitor.sh, auto-resume on terminal stop_reason) is unaffected.

Exit Codes

When Something Looks Wrong

• Exit 2 "no cluster" → hand-off env missing. Check HYPERLOOM_MN_EXT_SERVICE_URL (+ infera _SSH_KEY and one *_IPS); provisioning is upstream of this CLI.
• ModuleNotFoundError: sglang + stderr shows sglang.launch_server on the sandbox → the client-only rule above tripped; fix env propagation.
• restart-server succeeded then /health timed out → framework early-exit; the driver exits 2 + MULTI_NODE_FAILURE_SNAPSHOT={kind:"framework_early_exit"} and the rank_0.log tail names the cause.
• Cross-node NCCL/RCCL collective hangs → watchdog abort, weights never load (server GPU mem stays near 0) → the pods lack a usable RDMA device (ibv_devices empty, no /dev/infiniband) while NCCL is forced onto IB (NCCL_IB_HCA set). This is a platform provisioning issue — the pods must request rdma/hca (a partial-GPU multi-node task must still get RDMA). To confirm/unblock, force TCP by exporting HYPERLOOM_MN_EXTRA_FWD_ENV='{"NCCL_IB_DISABLE":"1"}' before optimize: that is the channel both backends forward to the pods (rayjob via the job runtime_env, infera via the SSH fan-out). Slow but works. Not --extra-env — that reaches the variant filter only and never leaves the sandbox, so using it here looks like a clean result and rules nothing out.
• Variant aborts with no benchmark output → read failed_variants in the round's <action>_attempts.extras, or the per-variant abort_reason.json under <session_dir>/runs/<action>/<task_id>/variant_<NN>_<name>/ (error_class + error tail); session_dir is the per-run timestamped dir ($INFERENCE_OPTIMIZER_CURRENT_SESSION_DIR), not $USER_DATA_PATH itself.
• Launcher-flag rejection → an explore grid variant whose CLI flag isn't on the current image fails at argparse. Probe the launcher from a GPU pod (sglang.launch_server --help / vllm serve --help) and --skip-variants the missing ones; drop the skip when the probe shows the flag again. Do not carry a hard-coded skip list across sessions or model classes.

Interpreting a low-gain result

• Small validated gain with kernel_opt_outcome="skip" / totals.attempted=0 (reports/kernel_optimization_summary.json) → the step was host-bound; TraceLens suppresses kernel candidates on GPU-idle steps, so only structural levers (graph capture + batching) apply.
• Under PD + DP-attention the per-rank steady-state batch can be bs1 even at high client concurrency; if every tracelens/trace_split/ file is bs1_conc1, the trace is host-bound and kernel_opt skips by design. Kernel candidates need a compute-bound profile (steady-state bsN, N>1); multi-node auto-re-profiles with DP-attention stripped (disable with HYPERLOOM_PROFILE_AUTO_COMPUTE_BOUND=0).

Disaggregated + DP-attention prerequisites

• --enable-dp-attention / --enable-dp-lm-head are no-ops without --dp-size N (N>1); launch_infera_node auto-injects --dp-size = tp when a dp-attention flag is present and --dp-size is absent (explicit value wins).
• With dp_size>1 sglang binds one kv-events ZMQ socket per DP rank; the image must ship infera.common.net.free_tcp_port_block, else decode crash-loops with zmq.error.ZMQError: Address already in use — rebuild from current Optimus.

Readiness gate

_wait_for_server_health_async requires, in order: /health 200 → /v1/models non-empty → /v1/completions (max_tokens>=2, ignore_eos) returning completion_tokens>=2, twice. It fast-fails when /v1/models stays empty for HYPERLOOM_MN_MODELS_EMPTY_GRACE_S (default 600s) after /health is up (workers crashed on launch). Tunables: HYPERLOOM_MN_COMPLETION_PROBE_{COUNT,TOKENS,MIN_TOKENS}, HYPERLOOM_MN_MODELS_EMPTY_GRACE_S, HYPERLOOM_MN_HEALTH_WAIT_S.