andrem-sec Loop Skill
Schedules a prompt or slash command to run on a recurring interval. The job runs locally via the CronCreate tool — no remote infrastructure required.
Different from loop-operator: loop-operator manages autonomous multi-step loops with
safety guardrails and escalation gates. /loop is simpler — it schedules a single prompt
to repeat at an interval, like a cron job.
Usage
/loop [interval] <prompt or slash command>
/loop 5m /checkpoint
/loop 1h /retro
/loop 30m check if the build is passing and report status
If no interval is specified, default is 10 minutes.
Interval Parsing
Extract the interval from:
- Leading token:
/loop 5m /checkpoint→ 5 minutes - Trailing clause:
/loop /checkpoint every 5 minutes→ 5 minutes - No interval found → default 10 minutes
Supported units: s (seconds, min 60), m (minutes), h (hours), d (days)
Minimum granularity: 1 minute
Interval → Cron Conversion
| Interval | Cron expression |
|---|---|
| ≤59 minutes | */N * * * * (every N minutes) |
| 1–23 hours | 0 */H * * * (every H hours, on the hour) |
| 24 hours / 1 day | 0 0 * * * (daily at midnight) |
| Custom time | Ask user for preferred time if ambiguous |
Examples:
5m→*/5 * * * *30m→*/30 * * * *2h→0 */2 * * *1d→0 0 * * *
Scheduling
Use the CronCreate tool with:
expression: the cron stringprompt: the full prompt or slash command to rundescription: one-line human-readable description
Confirm with the user before creating if the interval is unusually short (<5m) or the prompt involves writes or external calls.
Execute Immediately
After creating the cron job, run the prompt once immediately. Do not make the user wait for the first scheduled fire.
Created: /checkpoint every 5 minutes (cron: */5 * * * *)
Running now for the first time...
[checkpoint output]
Managing Scheduled Loops
To list active loops: use CronList tool
To delete a loop: use CronDelete tool with the cron ID
Anti-Patterns
Do not schedule prompts that require interactive input — they will fail unattended.
Do not schedule write-heavy operations at high frequency without the user explicitly requesting it.
Do not create a loop without confirming the prompt is self-contained (no follow-up questions expected).
Mandatory Checklist
- Verify interval was parsed correctly (or defaulted to 10m)
- Verify cron expression is valid for the interval
- Verify CronCreate was called with description
- Verify prompt was executed once immediately after scheduling