Workspace

/workspace — 3-Pane Workspace Setup

Sets up a split-pane layout in cmux with lazygit in the top-right pane for live diff tracking and yazi in the bottom-right pane for file navigation, alongside your Claude Code session on the left.

Implementation Notes (Read First)

• One command per Bash call: Every bash block below is a single command. No pipes, no variable assignments. Claude holds surface IDs in its own reasoning between calls.
• Surface ID parsing: cmux new-split outputs OK surface:N workspace:N. Extract the surface:N token (e.g., surface:3) from the output and remember it for subsequent commands.
• Always include \n in cmux send to submit the command. Without it, text is typed but not executed.
• Cleanup is idempotent: If close-surface fails, continue. If there are no extra surfaces, skip cleanup.
• Yazi config is idempotent: Check before writing. Skip if show_hidden already present.

Steps

1. Check cmux environment

echo "${CMUX_WORKSPACE_ID:-NOT_SET}"

If output is NOT_SET, stop and tell Alex: "Not running inside a cmux workspace. Launch Claude Code via cmux to use this skill."

2. Detect project directory

pwd

Remember this path as the project directory. Use it in all subsequent cd and yazi commands.

3. Ensure yazi shows hidden files

Create the config directory if it doesn't exist:

mkdir -p ~/.config/yazi

Always write the config (overwrite to ensure correct structure):

printf '[manager]\nshow_hidden = true\n' > ~/.config/yazi/yazi.toml

Verify it was written correctly:

cat ~/.config/yazi/yazi.toml

Expected output:

[manager]
show_hidden = true

If the output doesn't match, warn Alex: "Could not write yazi config — hidden files may not show" and continue.

4. Clean up existing surfaces

Get the current (Claude Code) surface identifier:

cmux identify

The output is surface:N workspace:N. Remember the surface:N value — this is the Claude Code surface to preserve.

List all panes in the workspace:

cmux list-panes

For each pane:N token in the output, list its surfaces:

cmux list-pane-surfaces --pane <pane-ref>

Collect every surface:N token returned across all panes. For each surface that is NOT the Claude Code surface identified above, close it:

cmux close-surface --surface <ref>

If close-surface fails for any surface, ignore the error and continue. If no extra surfaces are found across any pane, skip closing and proceed directly to Step 5.

After closing all extra surfaces, wait for cmux to settle:

sleep 0.5

5. Create right split for lazygit

cmux new-split right

Output format: OK surface:N workspace:N. Extract and remember the surface:N value — this is the lazygit surface.

If the command fails or output contains no surface:N, stop and tell Alex: "Failed to create lazygit pane. Check that cmux is running and healthy."

6. Launch lazygit

Use the lazygit surface from Step 5. Replace <lazygit-surface> and <project-dir> with the remembered values:

cmux send --surface <lazygit-surface> "cd \"<project-dir>\" && lazygit\n"

7. Create bottom split for yazi

Split downward from the lazygit surface to create the yazi pane:

cmux new-split down --surface <lazygit-surface>

Output format: OK surface:N workspace:N. Extract and remember the surface:N value — this is the yazi surface.

If the command fails, warn Alex: "Failed to create yazi pane. Lazygit pane may still be usable." and skip Steps 8–9.

8. Launch yazi

Use the yazi surface from Step 7 and the project directory from Step 2:

cmux send --surface <yazi-surface> "yazi \"<project-dir>\"\n"

9. Wait for panes to initialize

sleep 1

10. Verify lazygit

cmux read-screen --surface <lazygit-surface>

Inspect the output and handle:

• Git UI visible (branches, commits, files): Success — proceed.
• "Create a new git repository?" prompt: Tell Alex: "lazygit is asking to init a repo. Reply 'y' to create or 'N' to cancel." Wait for Alex's choice, then send it.
• Branch name prompt: Send \n to accept default: cmux send --surface <lazygit-surface> "\n"
• Welcome/dialog overlay: Send \n to dismiss.
• "command not found": Tell Alex: "lazygit not installed. Run: brew install lazygit"
• Blank or shell prompt: Re-send: cmux send --surface <lazygit-surface> "lazygit\n"

11. Verify yazi

cmux read-screen --surface <yazi-surface>

Inspect the output and handle:

• Directory tree visible: Success — proceed.
• Blank or shell prompt: Re-send: cmux send --surface <yazi-surface> "yazi\n"
• "command not found": Tell Alex: "yazi not installed. Run: brew install yazi"
• Permission error: Warn Alex: "yazi started but encountered a permission error. Check directory permissions."

12. Confirm layout

Output the layout summary using the actual surface IDs remembered from earlier steps:

Workspace layout active:
  Left         → Claude Code session
  Top-right    → lazygit (surface:N) — live diffs
  Bottom-right → yazi (surface:N) — file navigator

lazygit tips:
  - Auto-refreshes as agents write code
  - j/k or arrow keys to navigate
  - space to stage files, c to commit, p to push
  - q to quit

yazi tips:
  - Arrow keys + Enter to navigate
  - . to toggle hidden files
  - / to search by filename, S for ripgrep content search, Z for fzf
  - Git status indicators shown inline
  - q to quit

Debug:
  cmux read-screen --surface <lazygit-surface>
  cmux read-screen --surface <yazi-surface>

Error Table

When Assisting Alex in This Workspace

Use these tools via the Bash tool proactively — all are installed:

These are inline Bash tool calls. The right panes update automatically as you work.