ECSS Structures — Acoustic Loading Response Analysis (space-systems/ecss/acoustic-analysis)
Use when the task is the acoustic loading response analysis of spacecraft structural
panels per ECSS-E-ST-32C clause 4.6.2.6 — converting measured or predicted broadband
sound pressure levels into panel acoustic forces, verifying that the diffuse-field
assumption applies at the frequencies of interest, categorizing excitation as
low-frequency or high-frequency structural coupling, checking structural response
margins, screening for acoustic fatigue risk, and aggregating per-surface compliance
findings.
Domain quick reference
Sound pressure level (SPL) is expressed in decibels relative to the standard
acoustic reference pressure of 20 µPa. The overall SPL (OASPL) across a spectrum
is computed by logarithmic summation of the individual band levels: each band
contributes 10^(SPL/10) to the linear sum, then the total is converted back to
decibels. Combining bands on a linear (power) scale prevents the underestimation
that results from averaging decibel values directly.
Diffuse acoustic field assumption: the acoustic field inside an acoustic test
facility or launch vehicle fairing can be treated as homogeneous and isotropic only
above the Schroeder frequency, which depends on the facility reverberation time
and volume (f_s = 2000 × √(T60 / V)). At frequencies below f_s the modal density
is too sparse for a statistical diffuse-field model to apply; analysis in that
regime requires a deterministic wave or statistical energy analysis approach.
Frequency regime: ECSS-E-ST-32C distinguishes low-frequency response (panel
behaviour dominated by global structural modes, typically below 200 Hz) from
high-frequency response (local panel resonances, dominated by radiation efficiency
and statistical energy analysis). The boundary at 200 Hz is a guideline; the
analyst must confirm using the panel critical frequency. Below the critical
frequency, radiation efficiency is less than unity and scales approximately as
the square root of the frequency-to-critical-frequency ratio.
Acoustic force on a panel is the product of the RMS acoustic pressure and the
panel reference area. For a diffuse field the effective pressure loading is
computed from the OASPL converted back to pressure units.
Margin of safety follows the standard structural convention:
MS = (allowable / response) − 1. A negative MS indicates non-compliance.
Acoustic fatigue risk is screened by combining the OASPL level with exposure
duration; sustained exposures (≥ 60 s) above a high-level threshold (typically
140 dB OASPL) warrant a detailed acoustic fatigue analysis.
Workflow
Collect the acoustic environment specification: obtain the 1/3-octave SPL
spectrum (or OASPL) for each loading event (launch, acoustic test, in-orbit
transient). Confirm the reference pressure convention (20 µPa) and the
measurement or prediction basis.
Verify diffuse-field applicability: for each frequency band of interest and
each facility or structural bay, compute the Schroeder frequency from the
reverberation time and volume. Drop any frequency bands below the Schroeder
frequency from the diffuse-field analysis and flag them for separate deterministic
treatment.
Compute OASPL: sum the individual 1/3-octave band levels on a linear power
basis to obtain the OASPL for each loading event. Use the OASPL to derive the
RMS acoustic pressure applied to each panel.
Categorize frequency regime: for each panel, determine whether the dominant
response frequency falls in the low-frequency or high-frequency regime relative
to the 200 Hz boundary and relative to the panel critical frequency. Low-frequency
panels are assessed using global structural models; high-frequency panels require
statistical energy analysis or a radiation-efficiency correction.
Compute panel acoustic force: multiply the RMS acoustic pressure by the panel
reference area to obtain the acoustic force input. For high-frequency panels apply
the radiation efficiency factor (< 1 below the critical frequency).
Check structural response margins: compute the margin of safety for each panel
from the analysis response and the allowable stress or displacement. Flag any panel
with MS < 0 as non-compliant.
Screen for acoustic fatigue risk: for each loading event, check whether the
OASPL exceeds the fatigue screening threshold and whether the exposure duration
meets or exceeds 60 s. Flag any event–panel combination that meets both conditions
for a detailed acoustic fatigue analysis.
Aggregate findings: collect the per-panel compliance results (margin check,
diffuse-field validity, fatigue risk flag) and produce a surface-level summary.
A surface is compliant only when all three checks pass.
Pitfalls
Averaging SPL values arithmetically: acoustic levels must be combined on a
linear (power) scale. Averaging decibel values directly underestimates the OASPL
whenever the band levels differ significantly and produces a non-conservative result.
Applying a diffuse-field model below the Schroeder frequency: in the
low-modal-density region the pressure field is not statistically uniform; treating
it as diffuse underestimates the spatial variation and can miss local pressure
peaks by a significant margin.
Ignoring radiation efficiency below the critical frequency: a panel radiates
less than a baffled piston below its critical frequency; collapsing radiation
efficiency to unity overestimates the acoustic force and is non-conservative for
response but unconservative for coupling loss factors in a statistical energy
analysis.
Reading an unset allowable as a pass: if no allowable stress or displacement
budget is on record for a panel, the margin check cannot be performed and the
surface must be flagged as having an incomplete assessment, not as compliant.
Skipping the fatigue screen for short acoustic test events: a brief burst at
very high OASPL can still initiate fatigue cracking in thin-gage aluminum panels;
the screening criterion combines level AND duration and both gates must be checked.
Behavior contract (gate 3)
The SPL conversion, OASPL aggregation, diffuse-field check, frequency-regime
categorization, acoustic-force computation, margin-of-safety calculation,
acoustic-fatigue risk screen, and compliance aggregation logic are exercised by
the gate 3 contract test:
scripts/test_acoustic_analysis.py against scripts/acoustic_analysis_logic.py
(stdlib unittest, offline). Run:
python3 scripts/test_acoustic_analysis.py
Compliance
- ECSS standards are freely downloadable (ESA); cite the source and paraphrase per
standards-map.yaml.
- compliance: STANDARDS-REF, gated: false.
1---2name: acoustic-analysis3description: "Use when analyze acoustic loading response of spacecraft structural panels under a diffuse acoustic field per ECSS-E-ST-32C clause 4.6.2.6: convert broadband sound pressure levels to acoustic pressure, compute overall sound pressure level from spectral bands, categorize the excitation as low-frequency or high-frequency coupling, compute acoustic force on each panel, verify structural response margins against allowables, confirm the diffuse-field assumption above the Schroeder frequency, assess acoustic fatigue risk for sustained high-level exposures, and aggregate compliance findings per surface. Trigger: ecss, e-st-32-structures-scope, acoustic-analysis, diffuse-acoustic-field, sound-pressure-level, acoustic-loading, low-frequency-response, structural-acoustic, acoustic-fatigue."4license: Apache-2.05compliance: STANDARDS-REF6standards:7 - id: ecss8 reference-only: true9gated: false10domain: space-systems11pack: space-systems12compatibility: "agentskills.io SKILL.md; any SKILL.md host (Claude Code, Hermes, OpenClaw)"13metadata:14 source: https://skillmd.com/skills/ashfordeou/acoustic-analysis15 domain: space-systems16 subdomain: ecss17 tags: [ecss, e-st-32-structures-scope, acoustic-analysis, diffuse-acoustic-field, sound-pressure-level, acoustic-loading, low-frequency-response, structural-acoustic, acoustic-fatigue]18 version: 0.1.019 author: Aero Agent Skills20---2122# ECSS Structures — Acoustic Loading Response Analysis (space-systems/ecss/acoustic-analysis)2324Use when the task is the acoustic loading response analysis of spacecraft structural25panels per ECSS-E-ST-32C clause 4.6.2.6 — converting measured or predicted broadband26sound pressure levels into panel acoustic forces, verifying that the diffuse-field27assumption applies at the frequencies of interest, categorizing excitation as28low-frequency or high-frequency structural coupling, checking structural response29margins, screening for acoustic fatigue risk, and aggregating per-surface compliance30findings.3132## Domain quick reference3334- **Sound pressure level (SPL)** is expressed in decibels relative to the standard35 acoustic reference pressure of 20 µPa. The overall SPL (OASPL) across a spectrum36 is computed by logarithmic summation of the individual band levels: each band37 contributes 10^(SPL/10) to the linear sum, then the total is converted back to38 decibels. Combining bands on a linear (power) scale prevents the underestimation39 that results from averaging decibel values directly.4041- **Diffuse acoustic field** assumption: the acoustic field inside an acoustic test42 facility or launch vehicle fairing can be treated as homogeneous and isotropic only43 above the Schroeder frequency, which depends on the facility reverberation time44 and volume (f_s = 2000 × √(T60 / V)). At frequencies below f_s the modal density45 is too sparse for a statistical diffuse-field model to apply; analysis in that46 regime requires a deterministic wave or statistical energy analysis approach.4748- **Frequency regime**: ECSS-E-ST-32C distinguishes low-frequency response (panel49 behaviour dominated by global structural modes, typically below 200 Hz) from50 high-frequency response (local panel resonances, dominated by radiation efficiency51 and statistical energy analysis). The boundary at 200 Hz is a guideline; the52 analyst must confirm using the panel critical frequency. Below the critical53 frequency, radiation efficiency is less than unity and scales approximately as54 the square root of the frequency-to-critical-frequency ratio.5556- **Acoustic force on a panel** is the product of the RMS acoustic pressure and the57 panel reference area. For a diffuse field the effective pressure loading is58 computed from the OASPL converted back to pressure units.5960- **Margin of safety** follows the standard structural convention:61 MS = (allowable / response) − 1. A negative MS indicates non-compliance.6263- **Acoustic fatigue risk** is screened by combining the OASPL level with exposure64 duration; sustained exposures (≥ 60 s) above a high-level threshold (typically65 140 dB OASPL) warrant a detailed acoustic fatigue analysis.6667## Workflow68691. **Collect the acoustic environment specification**: obtain the 1/3-octave SPL70 spectrum (or OASPL) for each loading event (launch, acoustic test, in-orbit71 transient). Confirm the reference pressure convention (20 µPa) and the72 measurement or prediction basis.73742. **Verify diffuse-field applicability**: for each frequency band of interest and75 each facility or structural bay, compute the Schroeder frequency from the76 reverberation time and volume. Drop any frequency bands below the Schroeder77 frequency from the diffuse-field analysis and flag them for separate deterministic78 treatment.79803. **Compute OASPL**: sum the individual 1/3-octave band levels on a linear power81 basis to obtain the OASPL for each loading event. Use the OASPL to derive the82 RMS acoustic pressure applied to each panel.83844. **Categorize frequency regime**: for each panel, determine whether the dominant85 response frequency falls in the low-frequency or high-frequency regime relative86 to the 200 Hz boundary and relative to the panel critical frequency. Low-frequency87 panels are assessed using global structural models; high-frequency panels require88 statistical energy analysis or a radiation-efficiency correction.89905. **Compute panel acoustic force**: multiply the RMS acoustic pressure by the panel91 reference area to obtain the acoustic force input. For high-frequency panels apply92 the radiation efficiency factor (< 1 below the critical frequency).93946. **Check structural response margins**: compute the margin of safety for each panel95 from the analysis response and the allowable stress or displacement. Flag any panel96 with MS < 0 as non-compliant.97987. **Screen for acoustic fatigue risk**: for each loading event, check whether the99 OASPL exceeds the fatigue screening threshold and whether the exposure duration100 meets or exceeds 60 s. Flag any event–panel combination that meets both conditions101 for a detailed acoustic fatigue analysis.1021038. **Aggregate findings**: collect the per-panel compliance results (margin check,104 diffuse-field validity, fatigue risk flag) and produce a surface-level summary.105 A surface is compliant only when all three checks pass.106107## Pitfalls108109- **Averaging SPL values arithmetically**: acoustic levels must be combined on a110 linear (power) scale. Averaging decibel values directly underestimates the OASPL111 whenever the band levels differ significantly and produces a non-conservative result.112113- **Applying a diffuse-field model below the Schroeder frequency**: in the114 low-modal-density region the pressure field is not statistically uniform; treating115 it as diffuse underestimates the spatial variation and can miss local pressure116 peaks by a significant margin.117118- **Ignoring radiation efficiency below the critical frequency**: a panel radiates119 less than a baffled piston below its critical frequency; collapsing radiation120 efficiency to unity overestimates the acoustic force and is non-conservative for121 response but unconservative for coupling loss factors in a statistical energy122 analysis.123124- **Reading an unset allowable as a pass**: if no allowable stress or displacement125 budget is on record for a panel, the margin check cannot be performed and the126 surface must be flagged as having an incomplete assessment, not as compliant.127128- **Skipping the fatigue screen for short acoustic test events**: a brief burst at129 very high OASPL can still initiate fatigue cracking in thin-gage aluminum panels;130 the screening criterion combines level AND duration and both gates must be checked.131132## Behavior contract (gate 3)133134The SPL conversion, OASPL aggregation, diffuse-field check, frequency-regime135categorization, acoustic-force computation, margin-of-safety calculation,136acoustic-fatigue risk screen, and compliance aggregation logic are exercised by137the gate 3 contract test:138scripts/test_acoustic_analysis.py against scripts/acoustic_analysis_logic.py139(stdlib unittest, offline). Run:140141 python3 scripts/test_acoustic_analysis.py142143## Compliance144145- ECSS standards are freely downloadable (ESA); cite the source and paraphrase per146 standards-map.yaml.147- compliance: STANDARDS-REF, gated: false.