ECSS Structures — Aeroelastic Analysis (space-systems/ecss/aeroelastic-analysis)
Use when the task is the aeroelastic stability and response assessment of
ECSS-E-ST-32C clause 4.6.2.17 — determining flutter speed margin and
divergence speed margin for each aerodynamic surface of a launch vehicle
or atmospheric segment, checking frequency separation between structural
eigenmodes and aerodynamic forcing, and flagging surfaces that fall short
of any required clearance.
Domain quick reference
- Clause 4.6.2.17 addresses two primary aeroelastic instability mechanisms
for surfaces operating in the atmosphere: flutter (a dynamic instability
arising from the coupling of aerodynamic lift and moment forces with
the elastic and inertial properties of the structure, which can lead to
diverging oscillations) and divergence (a static instability in which
aerodynamic loads produce structural deformation that amplifies the
forcing beyond what the restoring elastic stiffness can arrest).
- Both instabilities are governed by a speed margin requirement: the
predicted flutter onset speed and the predicted divergence speed must
each exceed the design equivalent airspeed (VD) by at least 15 %. A
surface meeting both thresholds clears the aeroelastic speed envelope;
any surface below either threshold is a finding and must be redesigned
or its design speed reduced.
- A third criterion guards against resonant coupling between a structural
eigenfrequency and the dominant aerodynamic forcing frequency at
maximum dynamic pressure. The fractional separation —
|f_struct − f_aero| / min(f_struct, f_aero) — must be at least 10 %.
A surface with adequate speed margins but insufficient frequency
separation is still a coupled-aeroelastic-risk finding.
- Maximum dynamic pressure (max-Q) is the critical trajectory point.
Flutter and divergence speeds must be checked at max-Q conditions
(density, Mach number, and equivalent airspeed) and not solely at
sea-level conditions.
- Four regime labels are used in this leaf: stable (all three criteria
met), flutter-risk (flutter margin violated), divergence-risk
(divergence margin violated), coupled-aeroelastic-risk (multiple
margins violated, or frequency separation alone violated while speed
margins are adequate).
Workflow
- Inventory all aerodynamic surfaces on the vehicle that experience
significant aerodynamic loading during atmospheric flight: fins, grid
fins, fairings, control surfaces, protruding brackets, and any
structural panel with a non-negligible aerodynamic pressure
coefficient. Assign each surface a name and record its design speed
(VD), the analysis-predicted flutter onset speed, the
analysis-predicted divergence speed, the lowest structural elastic
eigenfrequency (from the structural finite-element model), and the
dominant aerodynamic forcing frequency at max-Q (from the unsteady
aerodynamic model or wind-tunnel data).
- For each surface compute the flutter speed margin:
margin = (V_flutter − VD) / VD. A result below 0.15 is a finding.
- For each surface compute the divergence speed margin:
margin = (V_div − VD) / VD. A result below 0.15 is a finding.
- For each surface compute the frequency separation:
sep = |f_struct − f_aero| / min(f_struct, f_aero). A result below
0.10 is a finding even when both speed margins pass.
- Categorize each surface using the regime labels: stable (all criteria
met), flutter-risk, divergence-risk, or coupled-aeroelastic-risk.
A surface is not aeroelastically compliant until it reaches the
stable category.
- Aggregate the per-surface findings into an assessment report. The
vehicle is aeroelastically compliant for the atmospheric-flight
phase only when every surface in the inventory is in the stable
category.
Pitfalls
- Checking flutter and divergence speed margins only at sea-level
conditions and reading a pass — max-Q typically occurs at altitude
where density and Mach number differ from sea level, and the flutter
speed envelope must span the full trajectory.
- Treating flutter risk and divergence risk as independent findings when
both margins are violated on the same surface — their combined
presence indicates a coupled structural–aerodynamic interaction that
is not adequately described by either single-mode margin alone.
- Using structural frequencies from the fixed-base finite-element model
without accounting for propellant mass variation — fuel depletion
shifts eigenfrequencies during flight, and the worst-case
aeroelastic coupling may occur mid-trajectory rather than at liftoff
or engine cutoff.
- Reading a surface with inadequate frequency separation as compliant
because its speed margins are both above threshold — the frequency
criterion is a separate gate; a near-resonant condition between a
structural mode and aerodynamic forcing can produce large
aeroelastic response amplitudes even when flutter and divergence
speed margins are satisfied.
- Omitting the divergence check for stiffness-dominated surfaces on the
assumption that flutter governs — on surfaces with high torsional
stiffness relative to bending stiffness, divergence can be the
critical instability and may occur at a lower speed than flutter.
Behavior contract (gate 3)
The flutter margin, divergence margin, frequency separation, and regime
categorization logic is exercised by the gate 3 contract test:
scripts/test_aeroelastic_analysis.py against
scripts/aeroelastic_analysis_logic.py (stdlib unittest, offline). Run:
python3 scripts/test_aeroelastic_analysis.py
Compliance
- ECSS standards are freely downloadable (ESA); cite the standard and
clause as the anchor; paraphrase per standards-map.yaml.
- compliance: STANDARDS-REF, gated: false.
1---2name: aeroelastic-analysis3description: "Use when determine aeroelastic stability margins for aerodynamic surfaces4 on a launch vehicle or atmospheric segment under ECSS-E-ST-32C clause 4.6.2.17:5 categorize each surface as flutter-critical or divergence-critical, compute the6 flutter speed margin and divergence speed margin against the design envelope, verify7 each margin exceeds the 15 % required clearance, evaluate frequency separation8 between structural eigenfrequencies and aerodynamic forcing, and flag any surface9 where flutter speed, divergence speed, or frequency separation falls short of the10 required threshold. Trigger: ecss, e-st-32c, aeroelastic, flutter, divergence,11 dynamic-response, frequency-separation, launch-vehicle-structures."12license: Apache-2.013compliance: STANDARDS-REF14standards:15 - id: ecss16 reference-only: true17gated: false18domain: space-systems19pack: space-systems20compatibility: "agentskills.io SKILL.md; any SKILL.md host (Claude Code, Hermes, OpenClaw)"21metadata:22 source: https://skillmd.com/skills/ashfordeou/aeroelastic-analysis23 domain: space-systems24 subdomain: ecss25 tags: [ecss, e-st-32c, aeroelastic, flutter, divergence, dynamic-response, frequency-separation, launch-vehicle-structures]26 version: 0.1.027 author: Aero Agent Skills28---2930# ECSS Structures — Aeroelastic Analysis (space-systems/ecss/aeroelastic-analysis)3132Use when the task is the aeroelastic stability and response assessment of33ECSS-E-ST-32C clause 4.6.2.17 — determining flutter speed margin and34divergence speed margin for each aerodynamic surface of a launch vehicle35or atmospheric segment, checking frequency separation between structural36eigenmodes and aerodynamic forcing, and flagging surfaces that fall short37of any required clearance.3839## Domain quick reference4041- Clause 4.6.2.17 addresses two primary aeroelastic instability mechanisms42 for surfaces operating in the atmosphere: flutter (a dynamic instability43 arising from the coupling of aerodynamic lift and moment forces with44 the elastic and inertial properties of the structure, which can lead to45 diverging oscillations) and divergence (a static instability in which46 aerodynamic loads produce structural deformation that amplifies the47 forcing beyond what the restoring elastic stiffness can arrest).48- Both instabilities are governed by a speed margin requirement: the49 predicted flutter onset speed and the predicted divergence speed must50 each exceed the design equivalent airspeed (VD) by at least 15 %. A51 surface meeting both thresholds clears the aeroelastic speed envelope;52 any surface below either threshold is a finding and must be redesigned53 or its design speed reduced.54- A third criterion guards against resonant coupling between a structural55 eigenfrequency and the dominant aerodynamic forcing frequency at56 maximum dynamic pressure. The fractional separation —57 |f_struct − f_aero| / min(f_struct, f_aero) — must be at least 10 %.58 A surface with adequate speed margins but insufficient frequency59 separation is still a coupled-aeroelastic-risk finding.60- Maximum dynamic pressure (max-Q) is the critical trajectory point.61 Flutter and divergence speeds must be checked at max-Q conditions62 (density, Mach number, and equivalent airspeed) and not solely at63 sea-level conditions.64- Four regime labels are used in this leaf: stable (all three criteria65 met), flutter-risk (flutter margin violated), divergence-risk66 (divergence margin violated), coupled-aeroelastic-risk (multiple67 margins violated, or frequency separation alone violated while speed68 margins are adequate).6970## Workflow71721. Inventory all aerodynamic surfaces on the vehicle that experience73 significant aerodynamic loading during atmospheric flight: fins, grid74 fins, fairings, control surfaces, protruding brackets, and any75 structural panel with a non-negligible aerodynamic pressure76 coefficient. Assign each surface a name and record its design speed77 (VD), the analysis-predicted flutter onset speed, the78 analysis-predicted divergence speed, the lowest structural elastic79 eigenfrequency (from the structural finite-element model), and the80 dominant aerodynamic forcing frequency at max-Q (from the unsteady81 aerodynamic model or wind-tunnel data).822. For each surface compute the flutter speed margin:83 margin = (V_flutter − VD) / VD. A result below 0.15 is a finding.843. For each surface compute the divergence speed margin:85 margin = (V_div − VD) / VD. A result below 0.15 is a finding.864. For each surface compute the frequency separation:87 sep = |f_struct − f_aero| / min(f_struct, f_aero). A result below88 0.10 is a finding even when both speed margins pass.895. Categorize each surface using the regime labels: stable (all criteria90 met), flutter-risk, divergence-risk, or coupled-aeroelastic-risk.91 A surface is not aeroelastically compliant until it reaches the92 stable category.936. Aggregate the per-surface findings into an assessment report. The94 vehicle is aeroelastically compliant for the atmospheric-flight95 phase only when every surface in the inventory is in the stable96 category.9798## Pitfalls99100- Checking flutter and divergence speed margins only at sea-level101 conditions and reading a pass — max-Q typically occurs at altitude102 where density and Mach number differ from sea level, and the flutter103 speed envelope must span the full trajectory.104- Treating flutter risk and divergence risk as independent findings when105 both margins are violated on the same surface — their combined106 presence indicates a coupled structural–aerodynamic interaction that107 is not adequately described by either single-mode margin alone.108- Using structural frequencies from the fixed-base finite-element model109 without accounting for propellant mass variation — fuel depletion110 shifts eigenfrequencies during flight, and the worst-case111 aeroelastic coupling may occur mid-trajectory rather than at liftoff112 or engine cutoff.113- Reading a surface with inadequate frequency separation as compliant114 because its speed margins are both above threshold — the frequency115 criterion is a separate gate; a near-resonant condition between a116 structural mode and aerodynamic forcing can produce large117 aeroelastic response amplitudes even when flutter and divergence118 speed margins are satisfied.119- Omitting the divergence check for stiffness-dominated surfaces on the120 assumption that flutter governs — on surfaces with high torsional121 stiffness relative to bending stiffness, divergence can be the122 critical instability and may occur at a lower speed than flutter.123124## Behavior contract (gate 3)125126The flutter margin, divergence margin, frequency separation, and regime127categorization logic is exercised by the gate 3 contract test:128scripts/test_aeroelastic_analysis.py against129scripts/aeroelastic_analysis_logic.py (stdlib unittest, offline). Run:130python3 scripts/test_aeroelastic_analysis.py131132## Compliance133134- ECSS standards are freely downloadable (ESA); cite the standard and135 clause as the anchor; paraphrase per standards-map.yaml.136- compliance: STANDARDS-REF, gated: false.