ECSS Structures — COPS with Metallic Liner (space-systems/ecss/cops-metallic-liner)
Use when the task is the structural verification of a Composite Overwrapped
Pressure Structure with a metallic liner under ECSS-E-ST-32C §4.4.3 —
computing the load shared between liner and composite overwrap, checking
stress margins in each component, accounting for ring stiffeners, and
confirming burst pressure compliance.
Domain quick reference
- A COPS with metallic liner consists of a thin metallic liner overwound
with a composite laminate (the overWrap). The liner provides leak
tightness; the composite carries the structural hoop load. Ring stiffeners,
when present, are smeared into the shell as an effective additional
stiffness contribution.
- Liner and composite share the same hoop strain at their interface because
the two layers are bonded. This compatibility condition determines how the
internal pressure load is apportioned: hoop strain ε_h = P·r / (E_l·t_l +
E_c·t_c), where subscripts l and c denote liner and composite respectively
and r is the inner radius.
- The metallic liner may yield at design pressure — this is often by intent
in a metallic-liner COPS, where the liner is sized to yield on first
pressurisation and the composite carries the bulk of the hoop load at
operating pressure. The assessment records whether yielding occurs and
whether it is within the design intent.
- Burst pressure is estimated from the combined hoop capacity of liner
(at yield stress) and composite (at allowable): P_burst = (σ_yl·t_l +
σ_allow_c·t_c) / r. The burst margin of safety is P_burst / (P_design · FoS) − 1.
- Ring stiffeners increase the effective axial stiffness of the shell. Each
stiffener ring is smeared as K_s = E_s·A_s / spacing [N/m], which feeds
into stability and dynamic response checks beyond this leaf's scope.
Workflow
- Gather the geometry (inner radius, liner wall thickness, composite
overwrap thickness) and material properties (liner modulus, liner yield
stress, composite hoop modulus, composite hoop allowable). Record the
ring stiffener cross-section area, material modulus, and spacing; set
area to zero when no stiffeners are present.
- Compute the common hoop strain using the compatibility condition:
ε_h = P_design · r / (E_l·t_l + E_c·t_c). Reject inputs with non-positive
dimensions or moduli before entering this step.
- Compute the hoop stress in the liner (σ_l = E_l · ε_h) and in the
composite (σ_c = E_c · ε_h) at design pressure.
- Compare σ_l against the liner yield stress. Record whether the liner has
yielded and the yield margin of safety. A yielded liner at design pressure
is a finding to document; it does not automatically fail the structure if
the burst margin is met.
- Compare σ_c against the composite hoop allowable. A negative composite
margin is a structural finding requiring redesign or allowable revision.
- If ring stiffeners are present, compute the smeared axial stiffness
K_s = E_s · A_s / spacing and record it for use in stability and dynamics
checks.
- Estimate burst pressure P_burst = (σ_yl·t_l + σ_allow_c·t_c) / r and
compute the burst margin MoS = P_burst / (P_design · FoS) − 1. Flag any
negative burst margin as a critical finding.
- Report the compliance status: the structure meets the §4.4.3 requirements
when the composite margin is non-negative and the burst margin is
non-negative. Liner yielding at design pressure must be declared but does
not block compliance when both of the above conditions are satisfied.
Pitfalls
- Applying pressure load only to the liner or only to the composite without
enforcing hoop-strain compatibility. The two layers must share the same
circumferential strain at their bond line; treating them as independent
vessels overstates the stress in the weaker layer.
- Treating liner yield at design pressure as an automatic failure. In a
metallic-liner COPS the liner is frequently designed to yield intentionally;
the compliance check is the burst margin, not whether the liner remains
elastic at design pressure.
- Using the composite ultimate stress as the burst allowable without checking
that this value includes the appropriate knockdown for open-hole,
temperature, and moisture effects. An un-knocked-down allowable produces an
unconservative burst pressure estimate.
- Omitting stiffener contribution when stiffeners are physically present.
Stiffeners increase shell stiffness and alter the buckling margin; ignoring
them understates the structure's resistance to instability but may also
shift load in ways that matter for local stress.
- Setting the burst factor of safety below the programme-required value.
ECSS-E-ST-32C §4.4.3 and the applicable pressure vessel safety requirements
define the minimum burst FoS; the value must be confirmed against the
applicable safety standard before running the margin check.
Behavior contract (gate 3)
The hoop-strain compatibility, liner yield, composite stress, stiffener
smearing, and burst margin logic is exercised by the gate 3 contract test:
scripts/test_cops_metallic_liner.py against
scripts/cops_metallic_liner_logic.py (stdlib unittest, offline). Run:
python3 scripts/test_cops_metallic_liner.py
Compliance
- ECSS standards are freely downloadable (ESA); cite the source and
paraphrase per standards-map.yaml.
- compliance: STANDARDS-REF, gated: false.
1---2name: cops-metallic-liner3description: "Use when assess the structural response of a COPS (Composite Overwrapped Pressure Structure) with metallic liner under ECSS-E-ST-32C §4.4.3: compute the hoop strain shared between the liner and composite overwrap via the compatibility condition, determine the stress state in each component at design pressure, check the liner against yielding, verify the composite against its hoop allowable, account for ring stiffener contributions to shell stiffness, and confirm the burst pressure margin satisfies the required factor of safety. Trigger: ecss, e-st-32-structures-scope, cops, composite-overwrapped-pressure-structure, metallic-liner, stiffened-shell, liner-interaction, burst-pressure, load-sharing."4license: Apache-2.05compliance: STANDARDS-REF6standards:7 - id: ecss8 reference-only: true9gated: false10domain: space-systems11pack: space-systems12compatibility: "agentskills.io SKILL.md; any SKILL.md host (Claude Code, Hermes, OpenClaw)"13metadata:14 source: https://skillmd.com/skills/ashfordeou/cops-metallic-liner15 domain: space-systems16 subdomain: ecss17 tags: [ecss, e-st-32-structures-scope, cops, composite-overwrapped-pressure-structure, metallic-liner, stiffened-shell, liner-interaction, burst-pressure, load-sharing]18 version: 0.1.019 author: Aero Agent Skills20---2122# ECSS Structures — COPS with Metallic Liner (space-systems/ecss/cops-metallic-liner)2324Use when the task is the structural verification of a Composite Overwrapped25Pressure Structure with a metallic liner under ECSS-E-ST-32C §4.4.3 —26computing the load shared between liner and composite overwrap, checking27stress margins in each component, accounting for ring stiffeners, and28confirming burst pressure compliance.2930## Domain quick reference3132- A COPS with metallic liner consists of a thin metallic liner overwound33 with a composite laminate (the overWrap). The liner provides leak34 tightness; the composite carries the structural hoop load. Ring stiffeners,35 when present, are smeared into the shell as an effective additional36 stiffness contribution.37- Liner and composite share the same hoop strain at their interface because38 the two layers are bonded. This compatibility condition determines how the39 internal pressure load is apportioned: hoop strain ε_h = P·r / (E_l·t_l +40 E_c·t_c), where subscripts l and c denote liner and composite respectively41 and r is the inner radius.42- The metallic liner may yield at design pressure — this is often by intent43 in a metallic-liner COPS, where the liner is sized to yield on first44 pressurisation and the composite carries the bulk of the hoop load at45 operating pressure. The assessment records whether yielding occurs and46 whether it is within the design intent.47- Burst pressure is estimated from the combined hoop capacity of liner48 (at yield stress) and composite (at allowable): P_burst = (σ_yl·t_l +49 σ_allow_c·t_c) / r. The burst margin of safety is P_burst / (P_design · FoS) − 1.50- Ring stiffeners increase the effective axial stiffness of the shell. Each51 stiffener ring is smeared as K_s = E_s·A_s / spacing [N/m], which feeds52 into stability and dynamic response checks beyond this leaf's scope.5354## Workflow55561. Gather the geometry (inner radius, liner wall thickness, composite57 overwrap thickness) and material properties (liner modulus, liner yield58 stress, composite hoop modulus, composite hoop allowable). Record the59 ring stiffener cross-section area, material modulus, and spacing; set60 area to zero when no stiffeners are present.612. Compute the common hoop strain using the compatibility condition:62 ε_h = P_design · r / (E_l·t_l + E_c·t_c). Reject inputs with non-positive63 dimensions or moduli before entering this step.643. Compute the hoop stress in the liner (σ_l = E_l · ε_h) and in the65 composite (σ_c = E_c · ε_h) at design pressure.664. Compare σ_l against the liner yield stress. Record whether the liner has67 yielded and the yield margin of safety. A yielded liner at design pressure68 is a finding to document; it does not automatically fail the structure if69 the burst margin is met.705. Compare σ_c against the composite hoop allowable. A negative composite71 margin is a structural finding requiring redesign or allowable revision.726. If ring stiffeners are present, compute the smeared axial stiffness73 K_s = E_s · A_s / spacing and record it for use in stability and dynamics74 checks.757. Estimate burst pressure P_burst = (σ_yl·t_l + σ_allow_c·t_c) / r and76 compute the burst margin MoS = P_burst / (P_design · FoS) − 1. Flag any77 negative burst margin as a critical finding.788. Report the compliance status: the structure meets the §4.4.3 requirements79 when the composite margin is non-negative and the burst margin is80 non-negative. Liner yielding at design pressure must be declared but does81 not block compliance when both of the above conditions are satisfied.8283## Pitfalls8485- Applying pressure load only to the liner or only to the composite without86 enforcing hoop-strain compatibility. The two layers must share the same87 circumferential strain at their bond line; treating them as independent88 vessels overstates the stress in the weaker layer.89- Treating liner yield at design pressure as an automatic failure. In a90 metallic-liner COPS the liner is frequently designed to yield intentionally;91 the compliance check is the burst margin, not whether the liner remains92 elastic at design pressure.93- Using the composite ultimate stress as the burst allowable without checking94 that this value includes the appropriate knockdown for open-hole,95 temperature, and moisture effects. An un-knocked-down allowable produces an96 unconservative burst pressure estimate.97- Omitting stiffener contribution when stiffeners are physically present.98 Stiffeners increase shell stiffness and alter the buckling margin; ignoring99 them understates the structure's resistance to instability but may also100 shift load in ways that matter for local stress.101- Setting the burst factor of safety below the programme-required value.102 ECSS-E-ST-32C §4.4.3 and the applicable pressure vessel safety requirements103 define the minimum burst FoS; the value must be confirmed against the104 applicable safety standard before running the margin check.105106## Behavior contract (gate 3)107108The hoop-strain compatibility, liner yield, composite stress, stiffener109smearing, and burst margin logic is exercised by the gate 3 contract test:110scripts/test_cops_metallic_liner.py against111scripts/cops_metallic_liner_logic.py (stdlib unittest, offline). Run:112python3 scripts/test_cops_metallic_liner.py113114## Compliance115116- ECSS standards are freely downloadable (ESA); cite the source and117 paraphrase per standards-map.yaml.118- compliance: STANDARDS-REF, gated: false.