ECSS Structures — COPV with Metallic Liner (space-systems/ecss/copv-metallic-liner)
Use when the task is to verify or size a Composite Overwrapped Pressure Vessel with metallic liner under ECSS-E-ST-32-02C §4.3.3 — computing liner stress at Maximum Expected Operating Pressure, verifying proof and burst pressure factors against ECSS minimums, estimating composite overwrap fiber stress at burst via netting theory, and assessing metallic liner fatigue life with a scatter-factored cycle requirement.
Domain quick reference
- A COPV with metallic liner consists of two load-sharing elements: the metallic liner (aluminium, titanium, or Inconel alloy) provides the leak-tight barrier and carries a fraction of the hoop load; the composite overwrap (carbon or aramid fiber in an epoxy matrix) carries the structural hoop and axial load. At MEOP the liner must remain within its yield envelope; the overwrap is sized to the burst requirement.
- Proof testing is conducted above MEOP (proof factor ≥ 1.25 × MEOP per ECSS-E-ST-32-02C) to screen for manufacturing defects. For a non-autofrettage design the liner must not yield at proof; for an autofrettage design the liner is intentionally taken through yield to introduce beneficial residual compressive stress in the liner bore, improving fatigue performance. The proof check identifies which regime applies and flags unexpected yielding.
- Burst pressure (factor ≥ 2.0 × MEOP) sets the design requirement for the composite overwrap. Fiber stress at burst is estimated using netting theory: the fibers are assumed to carry all load, scaled by the fiber volume fraction. The netting-theory result is conservative for hoop-dominated cylindrical sections and provides a first-pass overwrap sizing check.
- Liner fatigue arises from cyclic pressurisation and depressurisation. A power-law (Basquin-type) S-N model — Nf = (σ_f / σ_a)^m — estimates fatigue life from the stress amplitude and material constants. The life requirement is the product of the mission design cycle count and a scatter factor (default 4.0) that accounts for material variability and statistical confidence.
Workflow
- Gather vessel geometry (inner radius, liner thickness, overwrap thickness), material properties (liner yield strength, fiber tensile allowable, fiber volume fraction, Basquin fatigue constants), loading (MEOP, design cycle count), and design factors (proof factor, burst factor, fatigue scatter factor). Reject any missing required input before any check runs.
- Compute liner hoop stress at MEOP using the thin-wall Barlow formula (σ = p × r / t). Compare against liner yield strength to obtain margin of safety. A negative margin means the liner is overstressed at operating pressure and must be redesigned before proceeding.
- Verify the proof factor is at or above the ECSS minimum (1.25). Compute liner hoop stress at proof pressure; determine whether the liner yields (autofrettage regime) or remains elastic (non-autofrettage regime). Flag unexpected yielding as a finding requiring an explicit autofrettage design decision before qualification.
- Verify the burst factor is at or above the ECSS minimum (2.0). Estimate fiber hoop stress at burst via netting theory: σ_fiber = p_burst × r / (t_overwrap × Vf). Compare against the fiber tensile allowable to obtain overwrap burst margin. A negative margin requires overwrap thickness increase or fibre selection change.
- Compute liner fatigue life using the Basquin power-law model: Nf = (σ_f / σ_a)^m, where σ_f is the fatigue strength reference, σ_a is the liner hoop stress amplitude per cycle, and m is the slope exponent. Apply the scatter factor to the design cycle count to obtain the required life. Flag the liner as fatigue-inadequate if Nf < design_cycles × scatter.
- Aggregate all findings. The vessel is compliant only when the liner MEOP margin, proof factor, liner proof yield check, overwrap burst margin, and fatigue adequacy all return no findings.
Pitfalls
- Applying a burst factor below 2.0 and treating the vessel as flight-qualified — ECSS-E-ST-32-02C sets 2.0 as the minimum factor for COPV flight hardware; lower factors require formal deviation approval from the responsible authority.
- Conflating the liner yield limit at proof between autofrettage and non-autofrettage designs — in a non-autofrettage design, liner yielding at proof is a finding; in an autofrettage design it is intended and the residual stress state must be characterised and entered into the fatigue assessment, not treated as a failure or suppressed.
- Using gross overwrap cross-section area instead of net fiber area in the netting-theory burst check — the fiber volume fraction must scale the load-bearing area; omitting Vf systematically underestimates fiber stress and produces a non-conservative margin.
- Applying the design cycle count directly as the fatigue life requirement without the scatter factor — the scatter factor accounts for test-to-test variability and statistical confidence; omitting it produces an unconservative fatigue assessment that can pass on analysis but fail qualification test.
- Treating a missing or unset liner material property as a pass — an incomplete input set must raise an error before any check runs, not silently default to zero or unity, because both defaults yield nonsensical results.
Behavior contract (gate 3)
The hoop stress, proof/burst factor, fiber stress, fatigue life, and consolidated compliance checks are exercised by the gate 3 contract test: scripts/test_copv_metallic_liner.py against scripts/copv_metallic_liner_logic.py (stdlib unittest, offline). Run: python3 scripts/test_copv_metallic_liner.py
Compliance
- ECSS-E-ST-32-02C (Structural general requirements, pressure vessels): referenced as the clause anchor; no verbatim text reproduced.
- compliance: STANDARDS-REF, gated: false.
