ECSS Structures — Design Allowables Application (space-systems/ecss/design-allowables-application)
Use when the task is selecting the correct A-basis or B-basis design allowable
for a structural member under ECSS-E-ST-32C clause 4.5.8, identifying the
applicable material database, computing the margin of safety, and confirming
no member has a negative margin before the structural analysis package is
accepted.
Domain quick reference
- A-basis vs B-basis: A-basis is the lower one-sided tolerance bound
exceeded by 99 % of the material population at 95 % statistical confidence.
B-basis is the corresponding bound for 90 % of the population at 95 %
confidence. A-basis is required wherever a single member's failure causes
overall structural failure (single load path). B-basis is permitted when the
structure is redundant (multiple load paths) so that failure of one element
does not cause overall failure.
- Material source by class: metals use MMPDS (Metallic Materials Properties
Development and Standardization); composites use CMH-17 (Composite Materials
Handbook); non-metals and adhesives use supplier data sheets that must be
substantiated by test.
- Margin of safety: MoS = (allowable / applied_stress) − 1. A non-negative
MoS is required. A negative MoS is a structural finding that must be resolved
by redesign, load reduction, or a revised allowable with supporting test data.
- Failure-mode and environment match: the allowable must correspond to the
governing failure mode (tension, compression, shear, bearing) and to the
design temperature, moisture, and radiation environment; using a room-
temperature allowable in a cryogenic service condition is a systematic error.
Workflow
- Categorize each structural member by load-path type. Label the member
"single" (loss of this one element causes overall structural failure) or
"multiple" (redundant structure; failure of this element alone does not cause
overall failure). The load-path label determines the required basis.
- Assign the required basis. Single load path → A-basis required. Multiple
load path (redundant) → B-basis permitted. Record the required basis for
every member before retrieving any allowable value.
- Identify the material class and source document. Metal members: retrieve
allowable from MMPDS for the applicable alloy, temper, product form, and
failure mode. Composite members: retrieve from CMH-17 for the applicable
laminate and environment. Non-metal and adhesive members: use the supplier
data sheet value substantiated by lot-acceptance testing.
- Confirm the retrieved value matches the required basis. Check that the
MMPDS or CMH-17 entry is labeled with the correct basis column (A or B).
A B-basis value on a single load-path member is a non-conformance; flag it
and do not proceed to margin calculation until corrected.
- Compute the margin of safety. MoS = (allowable / applied_stress) − 1,
where applied_stress is derived from the design limit load (or design
ultimate load where appropriate) divided by the governing section property.
Verify that all load factors have been applied before this step so the factor
of safety is not double-counted.
- Flag findings and aggregate. Any member with MoS < 0 is a finding.
Any member where the retrieved allowable basis does not match the required
basis is also a finding. All findings must be resolved before the analysis
package can be accepted as structurally compliant.
Pitfalls
- Using B-basis on a single load-path member. If the member fails the
structure fails; only A-basis is acceptable. Applying the less-conservative
B-basis is a systematic non-conservatism that invalidates the analysis.
- Ignoring the environment condition on the allowable. MMPDS and CMH-17
allowables are tabulated per temperature; using a room-temperature value in
an elevated-temperature or cryogenic service condition gives a non-conservative
result without an explicit knock-down factor.
- Double-counting the factor of safety. If the applied stress already
reflects the design ultimate load (limit × 1.5 for most metallic structures),
divide the ultimate allowable by that same factor. Using limit load with the
ultimate allowable, or ultimate load with the limit allowable, produces either
an overly conservative or a non-conservative margin.
- Omitting a basis check on the source entry. Both MMPDS and CMH-17 publish
separate A- and B-basis columns for the same material and failure mode; pulling
the wrong column while noting the correct basis label is an error that will not
be caught by numerical range checks alone.
- Treating a missing allowable as a pass. If no allowable value exists in
the approved database for the material, product form, or failure mode, the
absence is a finding (allowable not established), not a pass with zero margin.
Behavior contract (gate 3)
The basis-selection, source-lookup, margin-of-safety computation, and
batch-assessment logic is exercised by the gate 3 contract test:
scripts/test_design_allowables_application.py against
scripts/design_allowables_application_logic.py (stdlib unittest, offline). Run:
python3 scripts/test_design_allowables_application.py
Compliance
- ECSS standards are freely downloadable (ESA); cite the source and paraphrase
per standards-map.yaml.
- compliance: STANDARDS-REF, gated: false.
1---2name: design-allowables-application3description: "Use when determine the correct design allowable basis (A-basis or B-basis) and verify structural margins for spacecraft structural members under ECSS-E-ST-32C clause 4.5.8: assign A-basis to single load-path members and B-basis to redundant (multiple load-path) members, retrieve the allowable stress value from the applicable material database (MMPDS for metals, CMH-17 for composites, supplier data for non-metals and adhesives), compute the margin of safety as (allowable / applied_stress) − 1, and flag any negative margin or basis mismatch before the analysis package is accepted. Trigger: ecss, e-st-32-structures-scope, design-allowables, a-basis, b-basis, mmpds, cmh-17, margin-of-safety, metals, composites, adhesives."4license: Apache-2.05compliance: STANDARDS-REF6standards:7 - id: ecss8 reference-only: true9gated: false10domain: space-systems11pack: space-systems12compatibility: "agentskills.io SKILL.md; any SKILL.md host (Claude Code, Hermes, OpenClaw)"13metadata:14 source: https://skillmd.com/skills/ashfordeou/design-allowables-application15 domain: space-systems16 subdomain: ecss17 tags: [ecss, e-st-32-structures-scope, design-allowables, a-basis, b-basis, mmpds, cmh-17, margin-of-safety, metals, composites]18 version: 0.1.019 author: Aero Agent Skills20---2122# ECSS Structures — Design Allowables Application (space-systems/ecss/design-allowables-application)2324Use when the task is selecting the correct A-basis or B-basis design allowable25for a structural member under ECSS-E-ST-32C clause 4.5.8, identifying the26applicable material database, computing the margin of safety, and confirming27no member has a negative margin before the structural analysis package is28accepted.2930## Domain quick reference3132- **A-basis vs B-basis**: A-basis is the lower one-sided tolerance bound33 exceeded by 99 % of the material population at 95 % statistical confidence.34 B-basis is the corresponding bound for 90 % of the population at 95 %35 confidence. A-basis is required wherever a single member's failure causes36 overall structural failure (single load path). B-basis is permitted when the37 structure is redundant (multiple load paths) so that failure of one element38 does not cause overall failure.39- **Material source by class**: metals use MMPDS (Metallic Materials Properties40 Development and Standardization); composites use CMH-17 (Composite Materials41 Handbook); non-metals and adhesives use supplier data sheets that must be42 substantiated by test.43- **Margin of safety**: MoS = (allowable / applied_stress) − 1. A non-negative44 MoS is required. A negative MoS is a structural finding that must be resolved45 by redesign, load reduction, or a revised allowable with supporting test data.46- **Failure-mode and environment match**: the allowable must correspond to the47 governing failure mode (tension, compression, shear, bearing) and to the48 design temperature, moisture, and radiation environment; using a room-49 temperature allowable in a cryogenic service condition is a systematic error.5051## Workflow52531. **Categorize each structural member by load-path type.** Label the member54 "single" (loss of this one element causes overall structural failure) or55 "multiple" (redundant structure; failure of this element alone does not cause56 overall failure). The load-path label determines the required basis.572. **Assign the required basis.** Single load path → A-basis required. Multiple58 load path (redundant) → B-basis permitted. Record the required basis for59 every member before retrieving any allowable value.603. **Identify the material class and source document.** Metal members: retrieve61 allowable from MMPDS for the applicable alloy, temper, product form, and62 failure mode. Composite members: retrieve from CMH-17 for the applicable63 laminate and environment. Non-metal and adhesive members: use the supplier64 data sheet value substantiated by lot-acceptance testing.654. **Confirm the retrieved value matches the required basis.** Check that the66 MMPDS or CMH-17 entry is labeled with the correct basis column (A or B).67 A B-basis value on a single load-path member is a non-conformance; flag it68 and do not proceed to margin calculation until corrected.695. **Compute the margin of safety.** MoS = (allowable / applied_stress) − 1,70 where applied_stress is derived from the design limit load (or design71 ultimate load where appropriate) divided by the governing section property.72 Verify that all load factors have been applied before this step so the factor73 of safety is not double-counted.746. **Flag findings and aggregate.** Any member with MoS < 0 is a finding.75 Any member where the retrieved allowable basis does not match the required76 basis is also a finding. All findings must be resolved before the analysis77 package can be accepted as structurally compliant.7879## Pitfalls8081- **Using B-basis on a single load-path member.** If the member fails the82 structure fails; only A-basis is acceptable. Applying the less-conservative83 B-basis is a systematic non-conservatism that invalidates the analysis.84- **Ignoring the environment condition on the allowable.** MMPDS and CMH-1785 allowables are tabulated per temperature; using a room-temperature value in86 an elevated-temperature or cryogenic service condition gives a non-conservative87 result without an explicit knock-down factor.88- **Double-counting the factor of safety.** If the applied stress already89 reflects the design ultimate load (limit × 1.5 for most metallic structures),90 divide the ultimate allowable by that same factor. Using limit load with the91 ultimate allowable, or ultimate load with the limit allowable, produces either92 an overly conservative or a non-conservative margin.93- **Omitting a basis check on the source entry.** Both MMPDS and CMH-17 publish94 separate A- and B-basis columns for the same material and failure mode; pulling95 the wrong column while noting the correct basis label is an error that will not96 be caught by numerical range checks alone.97- **Treating a missing allowable as a pass.** If no allowable value exists in98 the approved database for the material, product form, or failure mode, the99 absence is a finding (allowable not established), not a pass with zero margin.100101## Behavior contract (gate 3)102103The basis-selection, source-lookup, margin-of-safety computation, and104batch-assessment logic is exercised by the gate 3 contract test:105scripts/test_design_allowables_application.py against106scripts/design_allowables_application_logic.py (stdlib unittest, offline). Run:107108 python3 scripts/test_design_allowables_application.py109110## Compliance111112- ECSS standards are freely downloadable (ESA); cite the source and paraphrase113 per standards-map.yaml.114- compliance: STANDARDS-REF, gated: false.