ECSS Structures — Dimensional Stability Analysis DRD (space-systems/ecss/drd-dimstab-analysis)
Use when the task is to prepare or review the dimensional stability analysis (DSA) report deliverable required by ECSS-E-ST-32C Annex C — verifying that the document covers every mandatory content element, that material data are well-formed, and that computed dimensional changes satisfy the applicable stability requirements.
Domain quick reference
- ECSS-E-ST-32C Annex C defines the content requirements for the dimensional stability analysis report (DRD). The report must demonstrate that every structural item whose dimensional stability is a mission driver is assessed against a traceable stability requirement and that the margin is explicitly stated.
- Two primary displacement drivers are addressed: thermal (governed by the coefficient of thermal expansion, CTE, α, in 1/K) and hygrothermal (governed by the coefficient of moisture expansion, β, in 1/% moisture content change). Mechanical contributors (preload relaxation, creep) are identified and enumerated but may be handled by reference to separate analyses.
- Linear displacement is computed per member as δ = α × L × ΔT (thermal) or δ = β × L × ΔM (hygrothermal). Contributions are summed algebraically to obtain total dimensional change for each structural member.
- Stability margin is defined as (allowable / |actual|) − 1; a margin ≥ 0 indicates compliance; a margin < 0 is an exceedance and must be dispositioned.
- CTE mismatch between dissimilar materials joined at an interface is a common source of thermally-induced distortion and interface stress; the report must flag any pair where |α₁ − α₂| exceeds the threshold set by the joint design requirement.
- Mandatory DRD sections (ECSS-E-ST-32C Annex C): scope, applicable_documents, structure_description, material_properties, thermal_environments, moisture_environments, analysis_method, displacement_results, stability_requirements, margin_summary, conclusions.
Workflow
- Confirm the DRD report structure: check that all eleven mandatory sections are present. Flag every missing section before proceeding — an incomplete DRD is a non-conformance independent of the numerical results.
- Validate every material entry in the material_properties section: each record must supply a name, a CTE (α, 1/K), a coefficient of moisture expansion (β, 1/%), and a Young's modulus (E, GPa). Reject non-numeric or non-finite values with an explicit error; do not silently default.
- For each structural member, compute the thermal displacement: δ_thermal = α × L × ΔT, using the worst-case ΔT from thermal_environments.
- For each structural member, compute the hygrothermal displacement: δ_hygro = β × L × ΔM, using the worst-case ΔM from moisture_environments.
- Sum the thermal and hygrothermal displacements algebraically to obtain the total displacement δ_total for the member. Identify and enumerate any mechanical contributors (e.g. creep, preload relaxation) separately.
- For each structural member with an applicable stability requirement, compute the stability margin: margin = (allowable / |δ_total|) − 1. Record PASS where margin ≥ 0 and FAIL where margin < 0. A member with no stability requirement on record must be flagged as uncategorized — treat a missing requirement as a finding, not a pass.
- At every material interface between dissimilar materials, assess CTE mismatch: compute |α₁ − α₂| and compare against the joint design threshold. Flag any pair that exceeds the threshold.
- Aggregate findings into the margin_summary section: list every exceedance, every member with a missing stability requirement, and every interface with an excessive CTE mismatch. The DSA is compliant only when all three lists are empty.
Pitfalls
- Omitting the hygrothermal contribution for composite structural members — composites can exhibit β values of the same order of magnitude as α for polymeric matrix systems, and ignoring moisture effects under a wet pre-conditioning case can significantly understate the total dimensional change.
- Treating a missing stability requirement as compliance — an untraced requirement is a gap in the design authority chain, not evidence of margin; flag it explicitly.
- Applying direct algebraic sum when thermal and hygrothermal contributions act in opposite directions and using the conservative worst-case combination: for a stability budget, always evaluate both the maximum positive and maximum negative combined displacement.
- Ignoring CTE mismatch at bonded or bolted interfaces — even when each material individually meets its stability requirement, a high mismatch generates interface loads that can degrade pointing stability and joint integrity at the same time.
- Using midpoint (average) temperature or moisture environments rather than the worst-case extremes specified in the thermal and moisture boundary conditions section — the DSA is a worst-case envelope analysis.
Behavior contract (gate 3)
The DRD-section validation, material-entry validation, thermal and hygrothermal displacement computation, stability margin computation, CTE mismatch assessment, and stability requirement check logic is exercised by the gate 3 contract test: scripts/test_drd_dimstab_analysis.py against scripts/drd_dimstab_analysis_logic.py (stdlib unittest, offline). Run: python3 scripts/test_drd_dimstab_analysis.py
Compliance
- ECSS standards are freely downloadable (ESA); cite the source and paraphrase per standards-map.yaml.
- compliance: STANDARDS-REF, gated: false.
