ECSS Structures — Dynamic Response Analysis (space-systems/ecss/dynamic-response-analysis)
Use when the task is computing the dynamic response of a spacecraft structural
element under sine, random, or shock loading per ECSS-E-ST-32C clause 4.6.2.5.
The leaf covers swept-sine response using the dynamic amplification factor,
broadband random-vibration response via Miles' equation, and shock response
spectrum evaluation for half-sine pulse inputs.
Domain quick reference
- Clause 4.6.2.5 addresses three excitation families that a spacecraft structure
must be assessed against: sine (deterministic swept or fixed-frequency
loading), random (broadband stochastic loading expressed as a power
spectral density), and shock (transient impulsive loading characterized
by a shock response spectrum). Each load event is categorized into exactly
one family before a response model is selected.
- Sine response uses the single-DOF dynamic amplification factor (DAF):
DAF = 1 / sqrt[(1 − r²)² + (2ζr)²], where r = f/fn is the tuning ratio
and ζ is the critical damping ratio. At resonance (r = 1) the DAF equals
1/(2ζ). The peak dynamic response equals the static response multiplied by
the DAF at the excitation frequency of interest.
- Random vibration response is derived via Miles' equation for a
single-DOF oscillator: RMS = sqrt(π/2 · fn · Q · W), where fn is the
natural frequency, Q = 1/(2ζ) is the quality factor, and W is the input
power spectral density (g²/Hz) evaluated at fn. The design limit is the
3-sigma level (3 × RMS), assuming a Gaussian amplitude distribution.
- Shock response spectrum (SRS) quantifies the peak response of a
single-DOF oscillator to a transient pulse as a function of natural
frequency. For a half-sine pulse of amplitude A and duration D, the
response is governed by the dimensionless product τ = fn · D. In the
residual region (τ < 0.5) the SRS rises approximately as 2π·τ·A; in the
transitional and primary regions the SRS approaches a maximum near 2A.
- A load event that does not match sine, random, shock, or transient is
flagged as unrecognized and rejected before any response computation begins.
Workflow
- Categorize each load event in the mechanical environment specification
as sine, random, shock, or transient. Reject any event whose type is not
one of the four recognized categories before proceeding.
- For sine loading: identify the excitation frequency f and the static
response under the equivalent quasi-static load. Compute the tuning ratio
r = f/fn, evaluate the DAF, and multiply by the static response to obtain
the peak dynamic response. Flag any case where r falls within 10 % of
unity (near-resonance) for additional damping verification.
- For random loading: read the input PSD level W at the natural frequency
fn. Compute Q = 1/(2ζ). Apply Miles' equation: RMS = sqrt(π/2 · fn · Q · W).
Multiply by 3 to obtain the 3-sigma design acceleration. Compare against
the structural allowable.
- For shock loading: identify the pulse amplitude A and duration D.
Compute τ = fn · D. Select the SRS region (residual τ < 0.5, transitional
0.5 ≤ τ < 1, or primary τ ≥ 1) and evaluate the half-sine SRS
approximation. Compare the resulting SRS peak against the structural
allowable.
- For transient loading: note that a time-domain solver is required;
Miles' equation and the DAF formula do not apply. Flag the event for
numerical time-integration analysis outside the scope of this leaf.
- Aggregate results per load event: report the governing response value,
the analysis method used, and whether the structural allowable is met.
A load event is compliant only when the computed response is within the
allowable and no error flags remain.
Pitfalls
- Applying Miles' equation when the PSD is not flat in the vicinity of fn:
the equation assumes a constant (white-noise) spectrum at the resonance
frequency; a strongly shaped spectrum requires the PSD value evaluated at
fn, or a more general integration method.
- Collapsing the residual and primary SRS regions into one formula: the
half-sine SRS in the residual region is much lower than in the primary
region, and applying the primary-region approximation below τ = 0.5
significantly overestimates the response.
- Using the DAF formula at r ≈ 1 without verifying damping: near resonance
the DAF is controlled entirely by 2ζ; an incorrect damping value produces
large errors in the predicted peak response.
- Treating 3-sigma as a conservative bound without noting that real
structural loads may exhibit non-Gaussian statistics (pyrotechnic events,
limit cycles), in which case additional margin or peak-factor correction
is required.
Behavior contract (gate 3)
The DAF computation, Miles' equation, SRS approximation, load-type
categorization, and error-path logic are exercised by the gate 3 contract
test: scripts/test_dynamic_response_analysis.py against
scripts/dynamic_response_analysis_logic.py (stdlib unittest, offline). Run:
python3 scripts/test_dynamic_response_analysis.py
Compliance
- ECSS standards are freely downloadable (ESA); cite the source and
paraphrase per standards-map.yaml.
- compliance: STANDARDS-REF, gated: false.
1---2name: dynamic-response-analysis3description: "Use when compute the dynamic response of a spacecraft structure to sine, random, or shock loading per ECSS-E-ST-32C clause 4.6.2.5: apply the dynamic amplification factor to a swept-sine excitation, derive the RMS and 3-sigma acceleration response to a random-vibration input via Miles' equation, evaluate the shock response spectrum for a half-sine pulse, or identify which analysis type applies to a given load event. Categorize each load event as sine, random, shock, or transient before selecting the response model; flag any load event that does not map to a recognized category. Trigger: ecss, e-st-32-structures-scope, dynamic-response-analysis, random-vibration-analysis, shock-response-spectrum, sine-response, miles-equation, sdof-oscillator."4license: Apache-2.05compliance: STANDARDS-REF6standards:7 - id: ecss8 reference-only: true9gated: false10domain: space-systems11pack: space-systems12compatibility: "agentskills.io SKILL.md; any SKILL.md host (Claude Code, Hermes, OpenClaw)"13metadata:14 source: https://skillmd.com/skills/ashfordeou/dynamic-response-analysis15 domain: space-systems16 subdomain: ecss17 tags: [ecss, e-st-32-structures-scope, dynamic-response-analysis, random-vibration-analysis, shock-response-spectrum, sine-response, miles-equation]18 version: 0.1.019 author: Aero Agent Skills20---2122# ECSS Structures — Dynamic Response Analysis (space-systems/ecss/dynamic-response-analysis)2324Use when the task is computing the dynamic response of a spacecraft structural25element under sine, random, or shock loading per ECSS-E-ST-32C clause 4.6.2.5.26The leaf covers swept-sine response using the dynamic amplification factor,27broadband random-vibration response via Miles' equation, and shock response28spectrum evaluation for half-sine pulse inputs.2930## Domain quick reference3132- Clause 4.6.2.5 addresses three excitation families that a spacecraft structure33 must be assessed against: **sine** (deterministic swept or fixed-frequency34 loading), **random** (broadband stochastic loading expressed as a power35 spectral density), and **shock** (transient impulsive loading characterized36 by a shock response spectrum). Each load event is categorized into exactly37 one family before a response model is selected.38- **Sine response** uses the single-DOF dynamic amplification factor (DAF):39 DAF = 1 / sqrt[(1 − r²)² + (2ζr)²], where r = f/fn is the tuning ratio40 and ζ is the critical damping ratio. At resonance (r = 1) the DAF equals41 1/(2ζ). The peak dynamic response equals the static response multiplied by42 the DAF at the excitation frequency of interest.43- **Random vibration response** is derived via Miles' equation for a44 single-DOF oscillator: RMS = sqrt(π/2 · fn · Q · W), where fn is the45 natural frequency, Q = 1/(2ζ) is the quality factor, and W is the input46 power spectral density (g²/Hz) evaluated at fn. The design limit is the47 3-sigma level (3 × RMS), assuming a Gaussian amplitude distribution.48- **Shock response spectrum (SRS)** quantifies the peak response of a49 single-DOF oscillator to a transient pulse as a function of natural50 frequency. For a half-sine pulse of amplitude A and duration D, the51 response is governed by the dimensionless product τ = fn · D. In the52 residual region (τ < 0.5) the SRS rises approximately as 2π·τ·A; in the53 transitional and primary regions the SRS approaches a maximum near 2A.54- A load event that does not match sine, random, shock, or transient is55 flagged as unrecognized and rejected before any response computation begins.5657## Workflow58591. Categorize each load event in the mechanical environment specification60 as sine, random, shock, or transient. Reject any event whose type is not61 one of the four recognized categories before proceeding.622. For **sine** loading: identify the excitation frequency f and the static63 response under the equivalent quasi-static load. Compute the tuning ratio64 r = f/fn, evaluate the DAF, and multiply by the static response to obtain65 the peak dynamic response. Flag any case where r falls within 10 % of66 unity (near-resonance) for additional damping verification.673. For **random** loading: read the input PSD level W at the natural frequency68 fn. Compute Q = 1/(2ζ). Apply Miles' equation: RMS = sqrt(π/2 · fn · Q · W).69 Multiply by 3 to obtain the 3-sigma design acceleration. Compare against70 the structural allowable.714. For **shock** loading: identify the pulse amplitude A and duration D.72 Compute τ = fn · D. Select the SRS region (residual τ < 0.5, transitional73 0.5 ≤ τ < 1, or primary τ ≥ 1) and evaluate the half-sine SRS74 approximation. Compare the resulting SRS peak against the structural75 allowable.765. For **transient** loading: note that a time-domain solver is required;77 Miles' equation and the DAF formula do not apply. Flag the event for78 numerical time-integration analysis outside the scope of this leaf.796. Aggregate results per load event: report the governing response value,80 the analysis method used, and whether the structural allowable is met.81 A load event is compliant only when the computed response is within the82 allowable and no error flags remain.8384## Pitfalls8586- Applying Miles' equation when the PSD is not flat in the vicinity of fn:87 the equation assumes a constant (white-noise) spectrum at the resonance88 frequency; a strongly shaped spectrum requires the PSD value evaluated at89 fn, or a more general integration method.90- Collapsing the residual and primary SRS regions into one formula: the91 half-sine SRS in the residual region is much lower than in the primary92 region, and applying the primary-region approximation below τ = 0.593 significantly overestimates the response.94- Using the DAF formula at r ≈ 1 without verifying damping: near resonance95 the DAF is controlled entirely by 2ζ; an incorrect damping value produces96 large errors in the predicted peak response.97- Treating 3-sigma as a conservative bound without noting that real98 structural loads may exhibit non-Gaussian statistics (pyrotechnic events,99 limit cycles), in which case additional margin or peak-factor correction100 is required.101102## Behavior contract (gate 3)103104The DAF computation, Miles' equation, SRS approximation, load-type105categorization, and error-path logic are exercised by the gate 3 contract106test: scripts/test_dynamic_response_analysis.py against107scripts/dynamic_response_analysis_logic.py (stdlib unittest, offline). Run:108python3 scripts/test_dynamic_response_analysis.py109110## Compliance111112- ECSS standards are freely downloadable (ESA); cite the source and113 paraphrase per standards-map.yaml.114- compliance: STANDARDS-REF, gated: false.