ECSS IGE-2006 GEO Electron Flux Model (space-systems/ecss/e1004-b2-ige2006)
Use when the task is implementing the internal mechanics of the IGE-2006 geostationary trapped-electron flux model under ECSS-E-ST-10-04C Annex B.2: the model's energy-spectrum table, L-shell handling, and confidence-level (worst-case percentile) scaling that the sibling e1004-geo-ige leaf (clause 9.2.1.2.1) calls when it decides to compute a mission's long-term GEO electron flux.
Domain quick reference
- IGE-2006 (International Geostationary Electron model, 2006) is the ECSS reference model for the long-term-average and worst-case trapped energetic-electron environment near geostationary orbit (GEO) and nearby geosynchronous orbits (drift orbits, inclined near-GEO orbits, extended dwell in transfer orbit).
- The model characterizes electron differential flux as a function of two independent inputs: electron energy (spanning tens of keV to a few MeV) and L-shell (a band centered on the nominal GEO L-shell, not a single fixed value), so it covers orbits that sit near but not exactly at equatorial GEO.
- The model also reports flux at multiple confidence levels: a long-term mean spectrum plus one or more worst-case percentile spectra, so a mission can pick the design margin appropriate to its duration and risk posture. Deciding which confidence level a mission needs, and whether IGE-2006 is the right model to invoke at all, is the sibling e1004-geo-ige leaf's job (§9.2.1.2.1); this leaf implements the model's internal spectral/tabular mechanics that leaf calls into.
- Because the model is defined on a discrete grid of energy and L-shell nodes, evaluating it away from a tabulated node requires interpolation: log-linear in flux over energy (the spectrum spans many decades of flux), linear in the L-shell scale factor (a much smaller dynamic range). A request outside the tabulated node range is an extrapolation, not a validated model output, and must be flagged rather than silently clamped to the nearest boundary value.
Workflow
- For each electron-flux table request, record its id, the list of requested electron energies (MeV), the requested L-shell, and the requested confidence level (mean or a named worst-case percentile).
- For each requested energy, look up the differential flux by log-linear interpolation between the model's tabulated energy nodes; if the requested energy falls outside the tabulated node range, flag that energy as an extrapolation instead of returning the nearest boundary value.
- Look up the model's L-shell scale factor by linear interpolation between the model's tabulated L-shell nodes -- this captures that the trapped-electron population is centered on the geostationary L-shell and falls off toward the ends of the tabulated band; flag a requested L-shell outside the tabulated node range as an extrapolation.
- Resolve the requested confidence level to its flux scale factor: the mean spectrum has a scale factor of 1.0, and each worst-case percentile scales the mean flux upward, more so for a higher percentile.
- Combine the energy, L-shell, and confidence-level factors into the differential flux at each requested energy, and assemble the full requested-energy list into the spectrum table for the request.
- Mark a request compliant only when none of its energy or L-shell lookups needed extrapolation; roll every request's compliance into the assessment record and do not accept a request's spectrum table into the radiation environment specification while it remains flagged as extrapolated without a documented engineering waiver.
Pitfalls
- Evaluating the model only at the nominal GEO L-shell when the mission's actual orbit (drift orbit, inclined near-GEO orbit, extended transfer-orbit dwell) spans a range of L-shells that the tabulated grid exists to cover.
- Silently returning the nearest tabulated boundary value for an out-of-range energy or L-shell query instead of flagging it as an extrapolation needing engineering judgment before it feeds the radiation environment specification.
- Selecting the mean (long-term-average) spectrum for a long-duration or risk-averse mission that actually needs a worst-case percentile spectrum for adequate design margin.
- Confusing this leaf's model-internal table, spectrum, and L-shell mechanics with the sibling e1004-geo-ige leaf's separate job of deciding when and how to invoke the model for a mission's GEO flux specification.
Behavior contract (gate 3)
The energy-spectrum interpolation, L-shell scale-factor interpolation, confidence-level scaling, spectrum-table assembly, and extrapolation/compliance logic are exercised by the gate 3 contract test: scripts/test_e1004_b2_ige2006.py against scripts/e1004_b2_ige2006_logic.py (stdlib unittest, offline). Run: python3 scripts/test_e1004_b2_ige2006.py
Compliance
- ECSS standards are freely downloadable (ESA); cite the source and paraphrase per standards-map.yaml.
- compliance: STANDARDS-REF, gated: false.
