ECSS Solar Energetic Ion Spectra (space-systems/ecss/e1004-b7-solar-ions)
Use when the task is deriving the heavy-ion (Z > 2) content of the solar energetic particle (SEP) environment under ECSS-E-ST-10-04C Annex B.7, with element-by-element abundance ratios, for a single-event-effects (SEE) radiation analysis.
Domain quick reference
- Annex B.7 gives the heavy-ion (Z > 2) energy-spectra content of the SEP worst-case/worst-week environment used for SEE analyses, expressed as element-by-element differential flux vs. energy; the SEP proton/light-ion fluence and peak-flux leaves (sibling e1004-sep-fluence, e1004-sep-peakflux) cover the bulk light-particle content of the same environment.
- Because a first-principles spectrum for every element is impractical, per-species spectra are conventionally derived by scaling a reference element's measured/modeled differential energy spectrum (conventionally oxygen, Z=8) by that element's abundance ratio relative to the reference element.
- Elemental abundance ratios are far from constant between events: "gradual" (shock-associated, proton-rich) events carry abundance ratios close to average solar/coronal composition, while "impulsive" (flare-associated) events are strongly enhanced in heavy ions -- especially iron -- sometimes by an order of magnitude or more relative to gradual events. The iron-to-oxygen (Fe/O) ratio is the discriminating indicator between the two classes.
- Because the SEE rate at a given LET threshold is driven disproportionately by the heavy-ion tail, an SEE worst-case analysis must use the impulsive-event (Fe-enhanced) abundance table, not the gradual/average table -- the opposite bias from a proton-fluence total-dose analysis, which is dominated by the light-ion/proton content of gradual events.
- SEE analyses need heavy-ion species coverage extending at minimum through the iron group (through nickel, Z=28); truncating the species set below that discards ions that can dominate the single-event rate for high-LET-sensitive parts, mirroring the coverage concern in the sibling e1004-gcr leaf.
- This leaf scopes per-species spectrum derivation, event-type classification from Fe/O ratio, abundance-table application, and species-coverage/worst-case verification only. LET calculation from an ion spectrum and shielding/path-length effects are out of scope of this leaf.
Workflow
- For each SEE case, record the reference element's (oxygen, Z=8) differential energy spectrum, the case's observed or assumed Fe/O abundance ratio, and the maximum ion charge number (species_max_z) the case's heavy-ion table covers.
- Classify the case's SEP event type from its Fe/O ratio: gradual/ shock-associated when Fe/O sits at or below the average-composition threshold, impulsive/flare-associated when Fe/O sits at or above the enhanced threshold, mixed/intermediate otherwise.
- Select the elemental abundance table for the event type (the gradual-composition table or the impulsive/Fe-enhanced table; for a mixed classification, use the conservative envelope of both tables).
- For each species of interest, look up its abundance ratio relative to the reference element in the selected table and scale the reference element's differential flux spectrum by that ratio to obtain the species' differential flux spectrum.
- Determine the minimum heavy-ion species coverage the SEE analysis requires (through the iron group, Z=28) and verify the case's species_max_z meets it; flag insufficient coverage rather than silently truncating the species set.
- Determine the worst-case event classification required for an SEE analysis (impulsive or the mixed envelope; gradual alone is insufficient) and check the case's event-type result against it.
- Mark the case compliant only when its species coverage is adequate and its event type is impulsive or mixed; roll every case's compliance into the assessment record and do not close the radiation environment specification while any case remains non-compliant.
Pitfalls
- Using the gradual/average-composition abundance table for an SEE worst-case analysis instead of the impulsive/Fe-enhanced table, understating heavy-ion (especially iron-group) fluence and therefore the single-event rate.
- Truncating the heavy-ion species set below the iron group because those ions are rare, when rare high-Z, high-LET ions can still dominate the single-event rate for sensitive parts.
- Treating the reference element's spectral shape as sufficient for every species without applying the abundance ratio, which conflates the reference element's absolute flux with the flux of other elements.
- Using a single Fe/O ratio and abundance table for an entire mission's worst-case SEE analysis when the actual event population is a mix -- the conservative envelope (mixed classification) should be used unless a mission-specific single event is contractually the design case.
Behavior contract (gate 3)
The event-classification, abundance-table, spectrum-scaling, species-coverage, and compliance logic is exercised by the gate 3 contract test: scripts/test_e1004_b7_solar_ions.py against scripts/e1004_b7_solar_ions_logic.py (stdlib unittest, offline). Run: python3 scripts/test_e1004_b7_solar_ions.py
Compliance
- ECSS standards are freely downloadable (ESA); cite the source and paraphrase per standards-map.yaml.
- compliance: STANDARDS-REF, gated: false.
