ECSS Space Radiation — Displacement Damage Expression (space-systems/ecss/e1012-dd-expression)
Use when the task is to compute the displacement damage dose for a
spacecraft device using the NIEL-based DD expression of
ECSS-E-ST-10-12C §8.2 — enumerating particle-energy bins, weighting
each by its Non-Ionizing Energy Loss value, summing to a total DD dose,
converting to a reference-particle equivalent fluence via the DD
equivalence relation, and checking the result against the device
displacement damage requirement.
Domain quick reference
- Displacement damage (DD) is caused by energetic particles (protons,
neutrons, heavy ions, electrons) displacing lattice atoms in
semiconductor or other crystalline materials. The primary parameter
governing the severity is NIEL (Non-Ionizing Energy Loss), which
quantifies the energy transferred to atomic recoils per unit mass
traversed. NIEL is particle-type- and energy-dependent; units are
MeV·cm²/g.
- DD dose for a device is the integral of particle fluence times NIEL
over all particle types and energy bins: D_d = Σ_i (Φ_i × NIEL_i),
with units MeV/g. Each bin contributes independently; bins with zero
fluence or negligible NIEL may be dropped after explicit verification
that the contribution is below the calculation threshold.
- DD equivalence normalises the DD dose — or the partial contributions —
to a chosen reference condition, commonly the 1-MeV neutron fluence
in silicon or the 10-MeV proton fluence in gallium arsenide. The
equivalence factor for a given bin is NIEL_bin / NIEL_ref. The total
reference-equivalent fluence is Φ_eq = Σ_i (Φ_i × NIEL_i / NIEL_ref).
This converts a multi-particle, multi-energy environment into a single
scalar that can be compared directly against device test data obtained
under the reference condition.
- Device DD requirements are expressed as an allowable equivalent fluence
(particles/cm² at the reference condition) derived from component
qualification test data. The assessment is compliant when Φ_eq ≤
Φ_req with a margin factor ≥ the project-mandated design margin
(commonly 2×).
Workflow
- Assemble the particle-energy bin list for the mission orbit and
shielding configuration: for each particle type (proton, neutron,
electron, heavy ion), obtain the omnidirectional fluence per energy
bin over the mission lifetime. Record the bin boundaries and fluence
values in consistent units (particles/cm²).
- Retrieve the NIEL value for each (particle type, energy) bin from a
standard tabulation for the device material (silicon, GaAs, etc.).
NIEL tables are available from SRIM, MULASSIS, and ECSS-E-ST-10-12C
reference annexes. Verify each NIEL value is positive and in
MeV·cm²/g.
- Compute the partial DD contribution for each bin:
D_d,i = Φ_i × NIEL_i (MeV/g).
Sum all partial contributions to obtain the total DD dose D_d.
- Select the reference condition (reference particle type and energy,
and the corresponding NIEL_ref for the device material). Compute the
damage factor for each bin: K_i = NIEL_i / NIEL_ref. Apply it to
obtain the bin equivalent fluence: Φ_eq,i = Φ_i × K_i.
- Sum Φ_eq,i over all bins to obtain the total reference-equivalent
fluence Φ_eq.
- Compare Φ_eq against the device displacement damage requirement
Φ_req. Compute the margin factor M = Φ_req / Φ_eq. Flag a
failure when Φ_eq > Φ_req (M < 1) and a margin shortfall when
M < the project design margin.
Pitfalls
- Using the total DD dose D_d (MeV/g) directly as an equivalent fluence
without dividing by NIEL_ref — the two quantities have different units
and cannot be compared against a device test limit expressed in
particles/cm².
- Selecting different reference conditions for different subsystems on
the same spacecraft and mixing the resulting equivalent fluences in a
system-level sum — equivalent fluences from different reference
conditions are not additive.
- Dropping a particle type from the bin list because its NIEL is lower
than the dominant species without computing the contribution — for
high-fluence environments (e.g. trapped electrons) even a low NIEL can
produce a non-negligible equivalent fluence.
- Applying the DD equivalence conversion only to the dominant bin and
reading the result as the total — every bin must be converted and
summed before comparison with the requirement.
- Omitting the design margin check and treating Φ_eq ≤ Φ_req as
compliant without verifying that the ratio also satisfies the project
design margin multiplier.
Behavior contract (gate 3)
The partial DD computation, total DD dose aggregation, damage factor
calculation, equivalent fluence conversion, and budget assessment logic
are exercised by the gate 3 contract test:
scripts/test_e1012_dd_expression.py against
scripts/e1012_dd_expression_logic.py (stdlib unittest, offline). Run:
python3 scripts/test_e1012_dd_expression.py
Compliance
- ECSS standards are freely downloadable (ESA); cite the source and
paraphrase per standards-map.yaml.
- compliance: STANDARDS-REF, gated: false.
1---2name: e1012-dd-expression3description: "Use when compute the displacement damage (DD) dose for a spacecraft device under ECSS-E-ST-10-12C §8.2: identify all contributing particle types and energy bins from the mission radiation environment, retrieve the Non-Ionizing Energy Loss (NIEL) value for each bin, multiply each bin fluence by its NIEL to obtain the partial DD contribution, sum all partial contributions to obtain the total DD dose in MeV/g, convert to a reference-particle equivalent fluence using the DD equivalence relation (NIEL ratio to the chosen reference), and compare the resulting equivalent fluence against the device displacement damage requirement. Trigger: ecss, e-st-10-system-scope, displacement-damage, niel, damage-factor, equivalent-fluence, radiation-effects, dd-dose, proton-damage."4license: Apache-2.05compliance: STANDARDS-REF6standards:7 - id: ecss8 reference-only: true9gated: false10domain: space-systems11pack: space-systems12compatibility: "agentskills.io SKILL.md; any SKILL.md host (Claude Code, Hermes, OpenClaw)"13metadata:14 source: https://skillmd.com/skills/ashfordeou/e1012-dd-expression15 domain: space-systems16 subdomain: ecss17 tags: [ecss, e-st-10-system-scope, displacement-damage, niel, damage-factor, equivalent-fluence, radiation-effects]18 version: 0.1.019 author: Aero Agent Skills20---2122# ECSS Space Radiation — Displacement Damage Expression (space-systems/ecss/e1012-dd-expression)2324Use when the task is to compute the displacement damage dose for a25spacecraft device using the NIEL-based DD expression of26ECSS-E-ST-10-12C §8.2 — enumerating particle-energy bins, weighting27each by its Non-Ionizing Energy Loss value, summing to a total DD dose,28converting to a reference-particle equivalent fluence via the DD29equivalence relation, and checking the result against the device30displacement damage requirement.3132## Domain quick reference3334- Displacement damage (DD) is caused by energetic particles (protons,35 neutrons, heavy ions, electrons) displacing lattice atoms in36 semiconductor or other crystalline materials. The primary parameter37 governing the severity is NIEL (Non-Ionizing Energy Loss), which38 quantifies the energy transferred to atomic recoils per unit mass39 traversed. NIEL is particle-type- and energy-dependent; units are40 MeV·cm²/g.41- DD dose for a device is the integral of particle fluence times NIEL42 over all particle types and energy bins: D_d = Σ_i (Φ_i × NIEL_i),43 with units MeV/g. Each bin contributes independently; bins with zero44 fluence or negligible NIEL may be dropped after explicit verification45 that the contribution is below the calculation threshold.46- DD equivalence normalises the DD dose — or the partial contributions —47 to a chosen reference condition, commonly the 1-MeV neutron fluence48 in silicon or the 10-MeV proton fluence in gallium arsenide. The49 equivalence factor for a given bin is NIEL_bin / NIEL_ref. The total50 reference-equivalent fluence is Φ_eq = Σ_i (Φ_i × NIEL_i / NIEL_ref).51 This converts a multi-particle, multi-energy environment into a single52 scalar that can be compared directly against device test data obtained53 under the reference condition.54- Device DD requirements are expressed as an allowable equivalent fluence55 (particles/cm² at the reference condition) derived from component56 qualification test data. The assessment is compliant when Φ_eq ≤57 Φ_req with a margin factor ≥ the project-mandated design margin58 (commonly 2×).5960## Workflow61621. Assemble the particle-energy bin list for the mission orbit and63 shielding configuration: for each particle type (proton, neutron,64 electron, heavy ion), obtain the omnidirectional fluence per energy65 bin over the mission lifetime. Record the bin boundaries and fluence66 values in consistent units (particles/cm²).672. Retrieve the NIEL value for each (particle type, energy) bin from a68 standard tabulation for the device material (silicon, GaAs, etc.).69 NIEL tables are available from SRIM, MULASSIS, and ECSS-E-ST-10-12C70 reference annexes. Verify each NIEL value is positive and in71 MeV·cm²/g.723. Compute the partial DD contribution for each bin:73 D_d,i = Φ_i × NIEL_i (MeV/g).74 Sum all partial contributions to obtain the total DD dose D_d.754. Select the reference condition (reference particle type and energy,76 and the corresponding NIEL_ref for the device material). Compute the77 damage factor for each bin: K_i = NIEL_i / NIEL_ref. Apply it to78 obtain the bin equivalent fluence: Φ_eq,i = Φ_i × K_i.795. Sum Φ_eq,i over all bins to obtain the total reference-equivalent80 fluence Φ_eq.816. Compare Φ_eq against the device displacement damage requirement82 Φ_req. Compute the margin factor M = Φ_req / Φ_eq. Flag a83 failure when Φ_eq > Φ_req (M < 1) and a margin shortfall when84 M < the project design margin.8586## Pitfalls8788- Using the total DD dose D_d (MeV/g) directly as an equivalent fluence89 without dividing by NIEL_ref — the two quantities have different units90 and cannot be compared against a device test limit expressed in91 particles/cm².92- Selecting different reference conditions for different subsystems on93 the same spacecraft and mixing the resulting equivalent fluences in a94 system-level sum — equivalent fluences from different reference95 conditions are not additive.96- Dropping a particle type from the bin list because its NIEL is lower97 than the dominant species without computing the contribution — for98 high-fluence environments (e.g. trapped electrons) even a low NIEL can99 produce a non-negligible equivalent fluence.100- Applying the DD equivalence conversion only to the dominant bin and101 reading the result as the total — every bin must be converted and102 summed before comparison with the requirement.103- Omitting the design margin check and treating Φ_eq ≤ Φ_req as104 compliant without verifying that the ratio also satisfies the project105 design margin multiplier.106107## Behavior contract (gate 3)108109The partial DD computation, total DD dose aggregation, damage factor110calculation, equivalent fluence conversion, and budget assessment logic111are exercised by the gate 3 contract test:112scripts/test_e1012_dd_expression.py against113scripts/e1012_dd_expression_logic.py (stdlib unittest, offline). Run:114python3 scripts/test_e1012_dd_expression.py115116## Compliance117118- ECSS standards are freely downloadable (ESA); cite the source and119 paraphrase per standards-map.yaml.120- compliance: STANDARDS-REF, gated: false.