ECSS Space Environment — SEE Experimental Data and Rate Prediction (space-systems/ecss/e1012-see-data)
Use when the task is predicting in-orbit single-event-effect rates from
accelerator-measured cross-section data under ECSS-E-ST-10C §9.4.2 —
validating the Weibull parameterisation, integrating the fitted curve
against the mission LET spectrum, and checking the result against the
component hardness limit.
Domain quick reference
- Accelerator tests produce a set of measured SEE cross-section values
(cm² per device or per bit) at discrete ion LET values
(MeV·cm²/mg). These points are fitted to the Weibull sigmoid to give
a continuous cross-section curve. The four Weibull parameters are:
saturation cross-section σ_sat (asymptotic value at high LET),
threshold LET L₀ (LET below which no SEEs occur), width parameter W
(scale of the sigmoid rise), and shape exponent s (steepness).
Physical constraints require σ_sat > 0, L₀ ≥ 0, W > 0, and s > 0;
a parameter set that violates any of these must be rejected before use.
- The Weibull cross-section at LET L is:
σ(L) = 0 for L ≤ L₀;
σ(L) = σ_sat × (1 − exp(−((L − L₀)/W)^s)) for L > L₀.
This function is zero at and below threshold and approaches σ_sat
asymptotically for large L.
- The in-orbit SEE rate is the integral of σ(L) × φ(L) over LET, where
φ(L) is the mission differential LET spectrum (events per cm² per
second per unit LET). The integral is evaluated numerically using the
trapezoidal rule over the discrete LET spectrum points supplied by the
environment model. The LET spectrum must be sorted in ascending LET
order; a non-ascending or duplicate-LET input must be rejected.
- Each component carries a hardness limit (maximum allowable SEE rate in
events per second). The predicted rate is compared against this limit;
if the rate exceeds the limit the component is non-compliant. The
compliance margin is the ratio of the limit to the predicted rate; a
margin below 1.0 indicates a violation.
Workflow
- Collect the four Weibull fit parameters (σ_sat, L₀, W, s) from the
component test report and validate each parameter against its physical
constraint: σ_sat > 0, L₀ ≥ 0, W > 0, s > 0. Reject the parameter
set with a clear error if any constraint is violated; do not proceed
to integration with an invalid fit.
- Obtain the mission differential LET spectrum from the approved
environment model for the target orbit and shielding configuration.
Verify that the spectrum points are provided as (LET, flux) pairs
sorted in ascending LET order with no duplicate LET values; reject an
unsorted or empty spectrum before integration.
- Evaluate the Weibull cross-section σ(L) at each LET point in the
spectrum. For any LET at or below L₀ the cross-section is zero; for
LET above L₀ apply the Weibull formula.
- Apply the trapezoidal rule across adjacent spectrum intervals:
rate = Σ 0.5 × (σ(Lᵢ) × φᵢ + σ(Lᵢ₊₁) × φᵢ₊₁) × (Lᵢ₊₁ − Lᵢ).
Sum over all intervals to obtain the predicted in-orbit SEE rate
(events per second).
- Compare the predicted rate against the component hardness limit.
Compute the compliance margin as limit / rate (undefined when rate is
zero). Flag the component as non-compliant if the predicted rate
exceeds the limit; flag a missing or unset limit as an open finding
rather than an implicit pass.
- Report the predicted rate, compliance margin, and compliance status
alongside the Weibull parameters and the orbit/shielding inputs used,
so the result is traceable to the test data and environment model.
Pitfalls
- Applying the Weibull formula for LET values at or below the threshold
L₀: the result is mathematically zero but a negative argument to the
power function can produce a complex or domain error depending on the
shape exponent. Always return zero explicitly for L ≤ L₀.
- Treating an unsorted LET spectrum as acceptable: the trapezoidal rule
requires monotonically increasing LET. An unsorted input produces a
sign error in the interval width (Lᵢ₊₁ − Lᵢ becomes negative) and
silently gives a wrong result. Validate sort order before integrating.
- Using only two asymptotic points (both near saturation) and reading
the near-σ_sat rate as conservative: the integral of a flat function
near saturation multiplied by the flux at those LET values may
substantially overestimate or underestimate the rate depending on
where the flux peaks relative to the Weibull knee.
- Omitting the hardness limit check and reporting only the predicted
rate: a rate without a comparison against the requirement gives no
compliance verdict; an unset limit is itself a finding that must be
recorded, not treated as an automatic pass.
Behavior contract (gate 3)
The Weibull parameter validation, cross-section evaluation, LET spectrum
integration, and hardness-limit comparison logic are exercised by the
gate 3 contract test: scripts/test_e1012_see_data.py against
scripts/e1012_see_data_logic.py (stdlib unittest, offline). Run:
python3 scripts/test_e1012_see_data.py
Compliance
- ECSS standards are freely downloadable (ESA); cite the source and
paraphrase per standards-map.yaml.
- compliance: STANDARDS-REF, gated: false.
1---2name: e1012-see-data3description: "Use when compute in-orbit single-event-effect rates and degradation4 predictions from experimental cross-section measurements per ECSS-E-ST-10C §9.4.2:5 validate the four-parameter Weibull fit (saturation cross-section, threshold LET,6 width, shape exponent) against physical constraints, integrate the fitted cross-section7 curve against the mission differential LET spectrum using the trapezoidal rule to8 obtain the predicted in-orbit SEE rate, and compare the result against the component9 hardness limit to assess compliance. Reject an invalid Weibull parameter set or10 an unsorted LET spectrum before integration proceeds. Trigger: ecss,11 e-st-10-system-scope, see-data, weibull-fit, single-event-effects, cross-section,12 let-spectrum, see-rate-prediction, hardness-limit."13license: Apache-2.014compliance: STANDARDS-REF15standards:16 - id: ecss17 reference-only: true18gated: false19domain: space-systems20pack: space-systems21compatibility: "agentskills.io SKILL.md; any SKILL.md host (Claude Code, Hermes, OpenClaw)"22metadata:23 source: https://skillmd.com/skills/ashfordeou/e1012-see-data24 domain: space-systems25 subdomain: ecss26 tags: [ecss, e-st-10-system-scope, see-data, weibull-fit, single-event-effects, cross-section, let-spectrum, see-rate-prediction]27 version: 0.1.028 author: Aero Agent Skills29---3031# ECSS Space Environment — SEE Experimental Data and Rate Prediction (space-systems/ecss/e1012-see-data)3233Use when the task is predicting in-orbit single-event-effect rates from34accelerator-measured cross-section data under ECSS-E-ST-10C §9.4.2 —35validating the Weibull parameterisation, integrating the fitted curve36against the mission LET spectrum, and checking the result against the37component hardness limit.3839## Domain quick reference4041- Accelerator tests produce a set of measured SEE cross-section values42 (cm² per device or per bit) at discrete ion LET values43 (MeV·cm²/mg). These points are fitted to the Weibull sigmoid to give44 a continuous cross-section curve. The four Weibull parameters are:45 saturation cross-section σ_sat (asymptotic value at high LET),46 threshold LET L₀ (LET below which no SEEs occur), width parameter W47 (scale of the sigmoid rise), and shape exponent s (steepness).48 Physical constraints require σ_sat > 0, L₀ ≥ 0, W > 0, and s > 0;49 a parameter set that violates any of these must be rejected before use.50- The Weibull cross-section at LET L is:51 σ(L) = 0 for L ≤ L₀;52 σ(L) = σ_sat × (1 − exp(−((L − L₀)/W)^s)) for L > L₀.53 This function is zero at and below threshold and approaches σ_sat54 asymptotically for large L.55- The in-orbit SEE rate is the integral of σ(L) × φ(L) over LET, where56 φ(L) is the mission differential LET spectrum (events per cm² per57 second per unit LET). The integral is evaluated numerically using the58 trapezoidal rule over the discrete LET spectrum points supplied by the59 environment model. The LET spectrum must be sorted in ascending LET60 order; a non-ascending or duplicate-LET input must be rejected.61- Each component carries a hardness limit (maximum allowable SEE rate in62 events per second). The predicted rate is compared against this limit;63 if the rate exceeds the limit the component is non-compliant. The64 compliance margin is the ratio of the limit to the predicted rate; a65 margin below 1.0 indicates a violation.6667## Workflow68691. Collect the four Weibull fit parameters (σ_sat, L₀, W, s) from the70 component test report and validate each parameter against its physical71 constraint: σ_sat > 0, L₀ ≥ 0, W > 0, s > 0. Reject the parameter72 set with a clear error if any constraint is violated; do not proceed73 to integration with an invalid fit.742. Obtain the mission differential LET spectrum from the approved75 environment model for the target orbit and shielding configuration.76 Verify that the spectrum points are provided as (LET, flux) pairs77 sorted in ascending LET order with no duplicate LET values; reject an78 unsorted or empty spectrum before integration.793. Evaluate the Weibull cross-section σ(L) at each LET point in the80 spectrum. For any LET at or below L₀ the cross-section is zero; for81 LET above L₀ apply the Weibull formula.824. Apply the trapezoidal rule across adjacent spectrum intervals:83 rate = Σ 0.5 × (σ(Lᵢ) × φᵢ + σ(Lᵢ₊₁) × φᵢ₊₁) × (Lᵢ₊₁ − Lᵢ).84 Sum over all intervals to obtain the predicted in-orbit SEE rate85 (events per second).865. Compare the predicted rate against the component hardness limit.87 Compute the compliance margin as limit / rate (undefined when rate is88 zero). Flag the component as non-compliant if the predicted rate89 exceeds the limit; flag a missing or unset limit as an open finding90 rather than an implicit pass.916. Report the predicted rate, compliance margin, and compliance status92 alongside the Weibull parameters and the orbit/shielding inputs used,93 so the result is traceable to the test data and environment model.9495## Pitfalls9697- Applying the Weibull formula for LET values at or below the threshold98 L₀: the result is mathematically zero but a negative argument to the99 power function can produce a complex or domain error depending on the100 shape exponent. Always return zero explicitly for L ≤ L₀.101- Treating an unsorted LET spectrum as acceptable: the trapezoidal rule102 requires monotonically increasing LET. An unsorted input produces a103 sign error in the interval width (Lᵢ₊₁ − Lᵢ becomes negative) and104 silently gives a wrong result. Validate sort order before integrating.105- Using only two asymptotic points (both near saturation) and reading106 the near-σ_sat rate as conservative: the integral of a flat function107 near saturation multiplied by the flux at those LET values may108 substantially overestimate or underestimate the rate depending on109 where the flux peaks relative to the Weibull knee.110- Omitting the hardness limit check and reporting only the predicted111 rate: a rate without a comparison against the requirement gives no112 compliance verdict; an unset limit is itself a finding that must be113 recorded, not treated as an automatic pass.114115## Behavior contract (gate 3)116117The Weibull parameter validation, cross-section evaluation, LET spectrum118integration, and hardness-limit comparison logic are exercised by the119gate 3 contract test: scripts/test_e1012_see_data.py against120scripts/e1012_see_data_logic.py (stdlib unittest, offline). Run:121python3 scripts/test_e1012_see_data.py122123## Compliance124125- ECSS standards are freely downloadable (ESA); cite the source and126 paraphrase per standards-map.yaml.127- compliance: STANDARDS-REF, gated: false.