ECSS Space Environment — Radiation Shielding Geometry (space-systems/ecss/e1012-shield-geometry)
Use when the task is to build the radiation shielding geometry model for a sensitive part under ECSS-E-ST-10-12C §6.3 — defining the three-tier shielding hierarchy, computing areal density per tier, summing total effective shielding, and verifying that every interface meets the minimum shielding threshold.
Domain quick reference
- §6.3 organises the shielding seen by a sensitive part into three tiers from inner to outer: parts packaging (die encapsulant, ceramic or metallic package body, lid), equipment (PCB substrate, ground plane, box walls, cover plate, heatsink), and spacecraft (structural panels, inter-equipment shielding plates, external walls). Each tier is independent and its contribution is summed to obtain the total effective shielding.
- The fundamental quantity for each shielding layer is areal density (g/cm²) = physical thickness (cm) × material bulk density (g/cm³). Areal density is the conserved quantity across materials: aluminium, steel, tantalum, and titanium layers with the same areal density stop approximately the same fluence of electrons and protons for the purposes of a simplified shielding analysis.
- Interfaces — connectors, cable feed-throughs, apertures, access covers, and cutouts — interrupt the normal shielding continuity of the tier they belong to. Each interface must be inventoried and assigned its own effective areal density (typically much lower than the surrounding wall). An interface whose effective areal density is below the programme-level minimum threshold must be flagged as a shielding gap.
- A sensitive part whose total effective shielding (summed across all tiers) is below the programme-level minimum must also be flagged, separately from any interface finding.
Workflow
- Identify the sensitive part and its location within the equipment. Record the reference point at the part's geometric centre.
- For each tier (parts packaging, equipment, spacecraft), list every material layer that interposes between the reference point and the space environment. For each layer record: name, material, physical thickness (cm), and bulk density (g/cm³).
- Compute the areal density of each layer: thickness (cm) × density (g/cm³). Sum the layer areal densities within each tier to obtain the tier contribution.
- Sum the three tier contributions to obtain the total effective shielding in g/cm². Compare the total against the programme-level minimum threshold; flag a shortfall as a shielding-deficiency finding.
- Inventory all interfaces associated with each tier. For each interface, record its effective areal density (the shielding remaining through the interface aperture, including any local reinforcement). Compare each interface against the minimum interface threshold; flag any interface below the threshold as a shielding-gap finding.
- Collect all findings (shielding-deficiency and shielding-gap) for the sensitive part. The part's shielding geometry is considered compliant only when the finding list is empty for both deficiency and gap checks.
Pitfalls
- Omitting the parts-packaging tier because it appears small — ceramic package bodies (density ≈ 3.9 g/cm³, thickness ≈ 0.05–0.1 cm) contribute 0.2– 0.4 g/cm², which is comparable to a thin aluminium box wall and must not be ignored.
- Treating all interfaces as having zero shielding — a connector backshell or feed-through ferrule does provide a non-zero areal density; assign the correct value rather than assuming worst case, to avoid masking genuine gaps elsewhere.
- Applying a single minimum threshold to both the total effective shielding and the interface threshold — the two limits derive from different requirements (total dose vs. point-of-entry single-event) and are programme-specific inputs, not the same number.
- Summing the tiers without first verifying that the layer densities are bulk material values (not porous, not composite average) — composite or honeycomb panels require the effective density to be computed from the actual solid-fraction geometry before converting to areal density.
Behavior contract (gate 3)
The layer-creation, areal-density summation, geometry-model assembly, interface-check, and validation logic is exercised by the gate 3 contract test: scripts/test_e1012_shield_geometry.py against scripts/e1012_shield_geometry_logic.py (stdlib unittest, offline). Run: python3 scripts/test_e1012_shield_geometry.py
Compliance
- ECSS standards are freely downloadable (ESA); cite the source and paraphrase per standards-map.yaml.
- compliance: STANDARDS-REF, gated: false.
