ECSS Electromagnetic Compatibility — ESD-Related EMI Control (space-systems/ecss/e2007-esd-related-emi-control)
Use when the task is the electrostatic-discharge interference-control assessment of ECSS-E-ST-20-07C clause 4.2.4.2 — categorizing each discharge event a system or equipment is exposed to, sizing the arc-discharge pulse it delivers, coupling that pulse onto the victim harness, and checking the coupled transient against the victim transient-susceptibility threshold with a declared emi-margin.
Domain quick reference
- Clause 4.2.4.2 treats an electrostatic-discharge event as an interference source, not only as a damage mechanism: the arc is a fast, broadband current pulse that couples into harnesses and equipment ports, so the provision set is an interference-control set (bonding, surface conductivity, shield termination, transient filtering) rather than a single component-level protection device.
- Four event families cover the in-scope exposures. A surface-charging-arc comes from differential charging of an external dielectric relative to the conductive structure. An internal-charging-arc comes from energetic electrons buried inside a dielectric until the internal field exceeds breakdown. A triboelectric-separation event comes from contact and separation of dissimilar materials during deployment or release. A ground-handling-event is the pre-launch human-body or charged-device exposure. Each event is categorized into exactly one family before its provisions are checked, and an unrecognized event kind is rejected rather than assumed benign.
- The arc is modelled as a capacitive discharge through the arc resistance: peak current is the breakdown-voltage divided by the arc resistance, transferred charge is capacitance times breakdown-voltage, stored energy is half the capacitance times the breakdown-voltage squared, and the decay time constant is the product of arc resistance and capacitance. The spectral corner frequency derived from that time constant is what makes a small-energy arc an EMI source: a short time constant pushes significant content into the band where harness coupling is efficient.
- Coupling onto a victim-harness uses the surface transfer-impedance of its shield: the open-circuit transient is peak current times the transfer-impedance per metre times the exposed run length, reduced by the shield-effectiveness expressed in decibels. The result is compared with the victim transient-susceptibility threshold, and the ratio in decibels is the emi-margin. A design is acceptable only when that emi-margin meets or exceeds the declared requirement.
- The provision set is family-specific. A surface-charging-arc needs surface-conductivity control and a bonded conductive path plus terminated shields; an internal-charging-arc needs dielectric thickness or shielding control plus bonding and transient filtering; a triboelectric-separation event needs static-dissipative materials and bonding; a ground-handling-event needs a controlled handling area, operator bonding and transient filtering. A missing provision is a finding even when the computed emi-margin passes.
Workflow
- Inventory every electrostatic-discharge exposure of the system and its equipment, and categorize each one into its event family. Reject an unrecognized event kind before it enters the assessment.
- Size the arc-discharge pulse for each event from the stored capacitance, the breakdown-voltage and the arc resistance; record peak current, transferred charge, stored energy, decay time constant, pulse duration and spectral corner frequency.
- For each event and the victim it can reach, compute the coupled transient from the harness transfer-impedance, the exposed run length and the shield-effectiveness.
- Compute the emi-margin as the decibel ratio of the victim transient-susceptibility threshold to the coupled transient, and compare it against the declared requirement. Treat an exactly on-limit result as compliant by absorbing the floating-point representation error, never by widening the requirement.
- Check the family-specific provision set for each event and list the provisions that are not on record.
- Aggregate the coupling findings and the provision findings; the system is not interference-controlled for electrostatic discharge until both lists are empty. Report the worst emi-margin as the driving case.
Pitfalls
- Treating an arc as an energy problem only: a milli-joule arc that is harmless thermally still radiates a broadband pulse, and clause 4.2.4.2 is about that interference path, not about the energy.
- Collapsing the four event families into one generic exposure — the provision sets differ, and a surface-conductivity coating does nothing for an internal-charging-arc driven by buried charge.
- Applying the open-circuit transient without the shield-effectiveness term, or applying the shield-effectiveness twice by also reducing the transfer-impedance; each is a large error in opposite directions.
- Reading a passing emi-margin as compliance while a required provision is unrecorded — the computed coupling covers one victim and one path, while the provision set covers the exposures that were never modelled.
- Widening the declared emi-margin requirement to make an exactly on-limit case pass; absorb the representation error in the comparison instead and leave the engineering requirement untouched.
- Assuming a ground-handling-event is out of scope because it happens before launch; the latent damage and the provisions that prevent it are part of the same interference-control set.
Behavior contract (gate 3)
The event categorization, arc-pulse sizing, transfer-impedance coupling, emi-margin and provision-set logic is exercised by the gate 3 contract test: scripts/test_e2007_esd_related_emi_control.py against scripts/e2007_esd_related_emi_control_logic.py (stdlib unittest, offline). Run: python3 scripts/test_e2007_esd_related_emi_control.py
Compliance
- ECSS standards are freely downloadable (ESA); cite the source and paraphrase per standards-map.yaml.
- compliance: STANDARDS-REF, gated: false.
