ECSS Photovoltaic — Coverglass Corner Chips (space-systems/ecss/e2008-coverglass-corner-chips)
Use when the task is clause 8.7.1.3.5 of ECSS-E-ST-20-08C: the size allowed for a chip that takes a corner out of a coverglass. This leaf reads one coverglass outline and the corner bites observed on it, and returns a disposition per bite plus the rollup that decides the glass.
Domain quick reference
- The chord across the corner is the graded dimension. Three quarters of a millimetre is the ceiling, and it sits on the chord rather than on a leg because the chord bounds the whole bite in one number.
- A leg on its own says nothing. A bite taking a tenth of a millimetre off one edge and seven tenths off the other has a leg that would fail a limit the corner geometry never meant to catch, and a chord that is comfortably inside it.
- That lopsided bite is a gouge running along one edge wearing a corner's name. The leg ratio is what exposes it, and it belongs to the edge chip clause, so it is routed on rather than quietly accepted.
- The chord is derived from the two measured legs, never taken on trust. A directly measured chord is a cross-check: outside the triangle inequality it cannot belong to these legs and is refused as input, inside it but disagreeing it is referred, because one of the two readings is wrong and no disposition from either is worth anything yet.
- Reach is not size. The perpendicular from the corner to the chord is how far the bite actually penetrates toward the cell, and it is shorter than either leg and much shorter than the chord. Grading on a leg overstates it; grading on the chord alone never reports it.
- At a corner the glass has the diagonal of its overhang to give up before the bite stands over the illuminated aperture, which is longer than the straight overhang an edge chip has to work through.
- That bound is derived from the declared overhang, so a glass laid out with less of it tightens its own corner limit without a table edit, and a chord inside the ceiling can still be rejected on reach.
- A corner carries one bite. Two readings at one corner are a records problem to reconcile before any disposition, not two chips to add up.
- Small accepted bites still accumulate across the four corners, in face area and in how many corners are no longer square.
Workflow
- Resolve the outline: glass length and width, thickness and the overhang, and derive the face area, the illuminated aperture and the corner reach the overhang diagonal offers.
- Read each bite: its corner, its two legs, and any directly measured chord. Refuse a chord outside the triangle inequality for those legs.
- Derive the chord, the leg ratio, the perpendicular reach and the triangular area the bite takes off the face.
- Grade the chord against the three quarter millimetre ceiling, with a review band above it before outright rejection.
- Bound the reach with the overhang diagonal; past it the bite stands over the aperture and the glass is rejected whatever the chord said.
- Route a bite whose legs are too unequal to the edge chip clause, and refer a measured chord that disagrees with the legs.
- Accumulate corner area and the count of chipped corners, take the worst disposition, and return the glass verdict with the bites that are not accepted named.
Pitfalls
- Grading the bite on its longest leg. The clause is written on the chord and a leg limit rejects symmetric bites the chord accepts.
- Reading a measured chord straight into the disposition. It is a second reading of the same feature, and its job is to agree with the legs.
- Accepting a chord that is shorter than the longest leg. Such a chord cannot close those legs, so the record, not the glass, is the problem.
- Treating the chord as the reach. The perpendicular to it is roughly half a symmetric bite's leg, so a chord-only screen says nothing about how close the damage came to the cell.
- Giving a corner the straight overhang as its reach allowance. A corner offers the diagonal of it, which is the longer distance, and using the straight value rejects bites the geometry allows.
- Typing the overhang in as a constant instead of reading the layout.
- Letting a lopsided bite pass as a corner chip. Its chord is small precisely because one leg is small; the edge clause is what grades it.
- Adding two readings at one corner together as two chips.
- Comparing a measurement with a derived allowance by bare arithmetic. The chord is a square root of a sum of squares, so a bite sitting exactly on the ceiling can evaluate a few units in the last place above it; the comparison absorbs that representation error while the allowance stays untouched.
Behavior contract (gate 3)
The outline resolution and its derived corner reach, the chord derived from the legs, the triangle inequality refusal and the agreement check on a measured chord, the three quarter millimetre ceiling with its review band, the perpendicular reach against the overhang diagonal, the leg ratio routing to the edge clause and the corner area and count rollups with the glass verdict are exercised by the gate 3 contract test: scripts/test_e2008_coverglass_corner_chips.py against scripts/e2008_coverglass_corner_chips_logic.py (stdlib unittest, offline). Run: python3 scripts/test_e2008_coverglass_corner_chips.py
Compliance
- ECSS standards are freely downloadable (ESA); cite the source and paraphrase per standards-map.yaml.
- compliance: STANDARDS-REF, gated: false.
