ECSS Solar Cell Assemblies — Coverglass Defects (space-systems/ecss/e2008-sca-coverglass-defects)
Use when the task is clause 6.4.3.1.5 of ECSS-E-ST-20-08C: confirming that the coverglass fitted to a cell covers the bare cell surface completely. The clause is not asking how good the glass looks; it is asking whether any part of the cell has been left out from under it.
Domain quick reference
- The screen is geometry before it is defect work. A coverglass is a rectangle laid over a cell rectangle, and the answer lives in the signed overhang on each of the four edges once the placement offset has been taken off it. A positive overhang is glass standing proud; a negative one is a strip of bare cell.
- An offset does not lose overhang, it moves it. Extra margin on one edge is exactly the margin missing from the opposite one, which is why a glass that looks generously oversized in the fixture can still run short.
- Three outcomes come out of the same geometry and they are different findings. Square and large enough is complete coverage with margin. Large enough but off-centre is incomplete coverage that a lift and re-lay recovers. Smaller than the cell on an axis is the wrong part: no placement covers it and no re-lay helps.
- An edge chip in the glass is read through the overhang, not through its own size. The same chip is nothing on an edge with margin to give and an exposure on an edge that had none, so the chip is subtracted from the overhang at its own edge before anything is decided.
- A chip on an edge the placement already left short must not be charged twice. What it adds is the strip beyond the shortfall that was already counted, over the chip's own length.
- A shortfall smaller than the placement measurement tolerance is not a covered cell and it is not an exposed one either. It is an indeterminate record, and it is reported as such instead of being rounded into whichever answer the reader wanted.
- Covered with no margin is still a finding. An overhang under the declared minimum survives this inspection and not the next handling step.
- A glass nobody looked at is not a covered cell. The assembly stays open until every declared coverglass carries a record.
Workflow
- Take the cell and glass outlines and the placement offset, and derive the signed overhang on all four edges.
- Ask the part question first: is the glass at least as large as the cell on both axes? If not, name the short axes and reject; nothing downstream can recover it.
- Take the covered rectangle as the cell less the shortfall on each edge, and the uncovered area as what is left of the cell.
- Per edge chip, subtract the ingress from the overhang at its own edge, then credit only the exposure beyond what the placement had already left short over that length.
- Sort the shortfalls: beyond the tolerance is an exposure, inside it is indeterminate, a positive overhang under the minimum is a thin margin.
- Disposition: rework a misplaced but adequate glass, reject one that has exposed more of the cell than a re-lay can be risked over, refer a thin or indeterminate margin, accept the rest.
- Close with the assembly verdict, the uncovered area and its fraction, the glasses that are not covering, and the count of declared glasses with no record.
Pitfalls
- Screening the glass for defects and never checking where it sits. A flawless coverglass laid 0.8 mm off-centre leaves a bare strip the whole length of an edge, and no defect criterion in the record will see it.
- Reading an overhang as a distance and not as a signed quantity. The sign is the entire finding; an absolute value turns an exposure into a margin.
- Calling a misplaced glass and an undersized glass the same reject. One is recovered by lifting and re-laying, the other is the wrong part number on the bench.
- Grading an edge chip on its own size. What decides it is the overhang that edge had to give, and the same chip is benign on one edge and an exposure on the opposite one.
- Adding a chip exposure to a placement exposure on the same edge without taking the overlap out. The strip is counted twice and the assembly is scrapped on arithmetic.
- Rounding an unmeasurable shortfall into coverage. It is not known to be covered, and a confident pass here is exactly the record that never gets revisited.
- Passing a cell that is covered with zero margin. The clause is satisfied at the moment of inspection and nothing is left for handling, cure shrinkage or the next placement check.
- Comparing an overhang with a bound by bare arithmetic. Every overhang is a difference of halved dimensions plus a signed offset, so one that should land exactly on a bound can evaluate a few units in the last place under it; the comparison absorbs that representation error while the bound stays untouched.
Behavior contract (gate 3)
The signed per-edge overhang, the covered and uncovered areas, the undersized versus misplaced split, the chip-through-overhang rule with its overlap credit, the indeterminate band and the per-assembly completeness rollup are exercised by the gate 3 contract test: scripts/test_e2008_sca_coverglass_defects.py against scripts/e2008_sca_coverglass_defects_logic.py (stdlib unittest, offline). Run: python3 scripts/test_e2008_sca_coverglass_defects.py
Compliance
- ECSS standards are freely downloadable (ESA); cite the source and paraphrase per standards-map.yaml.
- compliance: STANDARDS-REF, gated: false.
