ECSS Structures — Leak-Before-Burst Demonstration by Analysis (space-systems/ecss/lbb-by-analysis)
Use when the task is to determine whether a pressurized flight structure
meets the leak-before-burst requirement through fracture-mechanics analysis
under ECSS-E-ST-32C clause 5.3.2. The analysis combines crack stability,
fatigue crack-growth life, and residual-strength verification to demonstrate
that a through-wall crack producing a detectable leak is established before
a catastrophic burst can occur.
Domain quick reference
- Clause 5.3.2 of ECSS-E-ST-32C requires LBB to be demonstrated either by
test or by analysis. The analysis route establishes three conditions:
(1) a surface crack penetrating the wall thickness produces a detectable
leak at the highest operating pressure before the critical crack size for
catastrophic failure is reached; (2) the fatigue crack-growth life from
the assumed initial flaw at the NDE detection threshold to through-wall
penetration exceeds the required service life with the design margin; and
(3) the structure retains sufficient residual strength at proof load with
the largest stable through-wall leak crack present.
- Critical crack length (a_c): The half-crack length at which the
stress intensity factor K equals the plane-strain fracture toughness K_Ic
under burst pressure. Derived from linear elastic fracture mechanics as
a_c = (K_Ic / (Y * sigma_burst))^2 / pi, where Y is the geometry
correction factor and sigma_burst is the hoop or membrane stress at burst
pressure.
- Through-wall criterion: A surface crack with depth a and half-length c
becomes a through-wall leak when the depth dimension a equals the wall
thickness t. The resulting through-wall half-crack length (a_tw) must
satisfy a_tw < a_c at burst stress for LBB to hold.
- Fatigue crack growth (Paris law): da/dN = C * (delta_K)^m, where C
and m are material constants from fatigue crack-growth data. The number
of load cycles for the crack to grow from the initial depth a_0 to the
wall thickness t is integrated and compared against the required design
life, scaled by the life safety factor per project requirement.
- Residual strength: Once a through-wall crack is confirmed stable under
burst pressure, the cracked structure is assessed at proof pressure with
the crack present; neither fracture nor net-section collapse must occur,
confirming the leak is detectable before structural failure.
Workflow
- Establish geometry and loading: Record wall thickness t, vessel radius
R, design burst pressure P_burst, proof pressure P_proof, and the number
of pressurization cycles N_life. Compute hoop stress sigma = P * R / t
for both burst and proof conditions.
- Define the initial flaw: Select the assumed initial surface crack depth
a_0 (NDE threshold) and half-length c_0 consistent with the aspect ratio
from the NDE capability curve. Reject inputs where a_0 is greater than or
equal to t (already through-wall) or a_0 is non-positive.
- Compute critical crack size at burst: Using K_Ic, geometry factor Y,
and sigma_burst, derive a_c = (K_Ic / (Y * sigma_burst))^2 / pi. This is
the half-crack length that triggers unstable fracture at burst pressure.
- Determine through-wall crack half-length: When depth a reaches t the
surface crack becomes through-wall. Estimate the through-wall half-length
a_tw from the crack shape evolution; as a conservative bound, preserve the
initial aspect ratio c_0/a_0 so that a_tw = (c_0/a_0) * t.
- Check the LBB crack-size criterion: Verify a_tw < a_c. If not, LBB by
analysis is not demonstrated for these material and geometry parameters.
- Integrate fatigue crack growth: Numerically integrate da/dN = C *
(delta_K)^m from a = a_0 to a = t under the operating load spectrum.
Confirm that the resulting cycle count N_through is greater than or equal
to N_life multiplied by the life safety factor. Flag a shortfall as a
crack-growth life violation.
- Assess residual strength with through-wall crack: At proof pressure,
compute K for the through-wall crack of half-length a_tw. Verify K < K_Ic
(no fracture) and net-section stress < yield strength (no net-section
collapse). Flag any violation as a residual-strength finding.
- Aggregate findings: Collect all flags from steps 5 through 7. The LBB
demonstration passes only when every check returns no violation.
Pitfalls
- Applying burst-pressure stress intensity directly to the initial flaw to
check critical size — the relevant comparison is the through-wall crack
half-length (a_tw) against a_c, not the initial flaw against a_c.
- Using a geometry factor Y = 1.0 for a surface crack without verifying that
the flat-plate assumption is appropriate; curved shells with R/t < 10
require a Folias or equivalent bulging correction.
- Skipping the residual-strength check and treating the crack-size criterion
alone as sufficient — a structure can satisfy a_tw < a_c yet still fail at
proof pressure by net-section collapse if the material is ductile with a
high K_Ic.
- Ignoring the aspect ratio evolution during fatigue growth — assuming a
constant a/c ratio through the thickness traversal underestimates or
overestimates the through-wall half-length depending on the initial shape.
- Accepting a safety factor on crack-growth life without also verifying the
NDE detection threshold is smaller than the critical crack depth at proof
pressure, so that inspection can confirm the leak before a test exceedance.
Behavior contract (gate 3)
The fracture-mechanics, crack-growth, and residual-strength logic is
exercised by the gate 3 contract test: scripts/test_lbb_by_analysis.py
against scripts/lbb_by_analysis_logic.py (stdlib unittest, offline). Run:
python3 scripts/test_lbb_by_analysis.py
Compliance
- ECSS standards are freely downloadable (ESA); cite the source and paraphrase
per standards-map.yaml.
- compliance: STANDARDS-REF, gated: false.
1---2name: lbb-by-analysis3description: "Use when determine whether a pressurized structure satisfies the leak-before-burst requirement by analysis per ECSS-E-ST-32C clause 5.3.2: compute the critical crack length at burst pressure using linear elastic fracture mechanics, verify that a through-wall leak crack remains stable below the residual-strength limit, integrate a Paris-law fatigue crack-growth model to confirm life from initial flaw to through-wall penetration exceeds mission life with margin, and assess residual strength with the largest stable leak crack. Trigger: ecss, e-st-32-structures-scope, leak-before-burst, lbb, fracture-mechanics, crack-growth, residual-strength, pressure-vessel."4license: Apache-2.05compliance: STANDARDS-REF6standards:7 - id: ecss8 reference-only: true9gated: false10domain: space-systems11pack: space-systems12compatibility: "agentskills.io SKILL.md; any SKILL.md host (Claude Code, Hermes, OpenClaw)"13metadata:14 source: https://skillmd.com/skills/ashfordeou/lbb-by-analysis15 domain: space-systems16 subdomain: ecss17 tags: [ecss, e-st-32-structures-scope, leak-before-burst, lbb, fracture-mechanics, crack-growth, residual-strength, pressure-vessel]18 version: 0.1.019 author: Aero Agent Skills20---2122# ECSS Structures — Leak-Before-Burst Demonstration by Analysis (space-systems/ecss/lbb-by-analysis)2324Use when the task is to determine whether a pressurized flight structure25meets the leak-before-burst requirement through fracture-mechanics analysis26under ECSS-E-ST-32C clause 5.3.2. The analysis combines crack stability,27fatigue crack-growth life, and residual-strength verification to demonstrate28that a through-wall crack producing a detectable leak is established before29a catastrophic burst can occur.3031## Domain quick reference3233- Clause 5.3.2 of ECSS-E-ST-32C requires LBB to be demonstrated either by34 test or by analysis. The analysis route establishes three conditions:35 (1) a surface crack penetrating the wall thickness produces a detectable36 leak at the highest operating pressure before the critical crack size for37 catastrophic failure is reached; (2) the fatigue crack-growth life from38 the assumed initial flaw at the NDE detection threshold to through-wall39 penetration exceeds the required service life with the design margin; and40 (3) the structure retains sufficient residual strength at proof load with41 the largest stable through-wall leak crack present.42- **Critical crack length (a_c)**: The half-crack length at which the43 stress intensity factor K equals the plane-strain fracture toughness K_Ic44 under burst pressure. Derived from linear elastic fracture mechanics as45 a_c = (K_Ic / (Y * sigma_burst))^2 / pi, where Y is the geometry46 correction factor and sigma_burst is the hoop or membrane stress at burst47 pressure.48- **Through-wall criterion**: A surface crack with depth a and half-length c49 becomes a through-wall leak when the depth dimension a equals the wall50 thickness t. The resulting through-wall half-crack length (a_tw) must51 satisfy a_tw < a_c at burst stress for LBB to hold.52- **Fatigue crack growth (Paris law)**: da/dN = C * (delta_K)^m, where C53 and m are material constants from fatigue crack-growth data. The number54 of load cycles for the crack to grow from the initial depth a_0 to the55 wall thickness t is integrated and compared against the required design56 life, scaled by the life safety factor per project requirement.57- **Residual strength**: Once a through-wall crack is confirmed stable under58 burst pressure, the cracked structure is assessed at proof pressure with59 the crack present; neither fracture nor net-section collapse must occur,60 confirming the leak is detectable before structural failure.6162## Workflow63641. **Establish geometry and loading**: Record wall thickness t, vessel radius65 R, design burst pressure P_burst, proof pressure P_proof, and the number66 of pressurization cycles N_life. Compute hoop stress sigma = P * R / t67 for both burst and proof conditions.682. **Define the initial flaw**: Select the assumed initial surface crack depth69 a_0 (NDE threshold) and half-length c_0 consistent with the aspect ratio70 from the NDE capability curve. Reject inputs where a_0 is greater than or71 equal to t (already through-wall) or a_0 is non-positive.723. **Compute critical crack size at burst**: Using K_Ic, geometry factor Y,73 and sigma_burst, derive a_c = (K_Ic / (Y * sigma_burst))^2 / pi. This is74 the half-crack length that triggers unstable fracture at burst pressure.754. **Determine through-wall crack half-length**: When depth a reaches t the76 surface crack becomes through-wall. Estimate the through-wall half-length77 a_tw from the crack shape evolution; as a conservative bound, preserve the78 initial aspect ratio c_0/a_0 so that a_tw = (c_0/a_0) * t.795. **Check the LBB crack-size criterion**: Verify a_tw < a_c. If not, LBB by80 analysis is not demonstrated for these material and geometry parameters.816. **Integrate fatigue crack growth**: Numerically integrate da/dN = C *82 (delta_K)^m from a = a_0 to a = t under the operating load spectrum.83 Confirm that the resulting cycle count N_through is greater than or equal84 to N_life multiplied by the life safety factor. Flag a shortfall as a85 crack-growth life violation.867. **Assess residual strength with through-wall crack**: At proof pressure,87 compute K for the through-wall crack of half-length a_tw. Verify K < K_Ic88 (no fracture) and net-section stress < yield strength (no net-section89 collapse). Flag any violation as a residual-strength finding.908. **Aggregate findings**: Collect all flags from steps 5 through 7. The LBB91 demonstration passes only when every check returns no violation.9293## Pitfalls9495- Applying burst-pressure stress intensity directly to the initial flaw to96 check critical size — the relevant comparison is the through-wall crack97 half-length (a_tw) against a_c, not the initial flaw against a_c.98- Using a geometry factor Y = 1.0 for a surface crack without verifying that99 the flat-plate assumption is appropriate; curved shells with R/t < 10100 require a Folias or equivalent bulging correction.101- Skipping the residual-strength check and treating the crack-size criterion102 alone as sufficient — a structure can satisfy a_tw < a_c yet still fail at103 proof pressure by net-section collapse if the material is ductile with a104 high K_Ic.105- Ignoring the aspect ratio evolution during fatigue growth — assuming a106 constant a/c ratio through the thickness traversal underestimates or107 overestimates the through-wall half-length depending on the initial shape.108- Accepting a safety factor on crack-growth life without also verifying the109 NDE detection threshold is smaller than the critical crack depth at proof110 pressure, so that inspection can confirm the leak before a test exceedance.111112## Behavior contract (gate 3)113114The fracture-mechanics, crack-growth, and residual-strength logic is115exercised by the gate 3 contract test: scripts/test_lbb_by_analysis.py116against scripts/lbb_by_analysis_logic.py (stdlib unittest, offline). Run:117python3 scripts/test_lbb_by_analysis.py118119## Compliance120121- ECSS standards are freely downloadable (ESA); cite the source and paraphrase122 per standards-map.yaml.123- compliance: STANDARDS-REF, gated: false.