ECSS Crimping — Tool, Die and Calibration Control (space-systems/ecss/q7026-crimp-tool-control)
Use when the task is the tooling step of ECSS-Q-ST-70-26C — deciding
whether a particular tool, die and positioner set may be drawn for a
particular crimp today, and whether its calibration is still live on
both the clock and the counter.
Domain quick reference
- A crimp tool is certified as a set, not as a frame. Tool, die and
positioner together are certified for a named contact family and a
conductor cross-section range. Fitting a positioner borrowed from the
next bench leaves the frame certified and the set not, and that is
the failure this control exists to catch.
- Certification and calibration are separate questions asked in order.
An uncertified set is wrong for this job whatever its calibration
says, and reporting it as a calibration matter sends it to the wrong
queue.
- Calibration is consumed two ways at once. Elapsed days eat the
calendar allowance whether or not the tool was used; accumulated
crimps eat the cycle allowance whether or not time passed. Whichever
runs out first governs. A tool checked only against its date sticker
can be six thousand crimps past its real allowance.
- There are three live states, not two. Below the recall threshold the
tool is released; between the threshold and the full allowance it is
still usable but has to be booked in; past the allowance it is out
and the work it did is suspect.
- The allowance exactly consumed is a recall, not an overdue. A tool
landing precisely on its interval has not yet exceeded it, and a
strict comparison against a computed fraction is where this decision
goes wrong on one machine and not another.
- A withdrawal in the register beats the arithmetic. The register
records what a person decided; the fractions only say what the
numbers allow.
Workflow
- Validate the register entry: identifiers, die and positioner part
numbers, the certified contact list, the certified conductor range,
both calibration intervals, the cycle counter and the withdrawal
flag.
- Validate the job: contact part number, conductor cross-section and
the positioner the job calls for, folding part-number case.
- Test certification first — contact in the list, positioner matching,
conductor inside the range inclusive of both bounds — and collect
every reason rather than stopping at the first.
- Compute elapsed days from the last calibration date, refusing a date
that precedes it.
- Express both allowances as consumed fractions and take the larger as
governing, naming which one it was.
- Categorize the consumed fraction as released, book-for-calibration
or overdue, treating the allowance exactly consumed as a booking.
- Let a withdrawal override everything, then an uncertified set, then
the calibration state.
- Roll the pool up into released, to-book, blocked and whether the job
can proceed at all today.
Pitfalls
- Checking the frame and not the die or positioner. The set is the
certified item.
- Reading the date sticker alone on a high-volume bench. The counter is
the allowance that runs out first there.
- Reporting an uncertified set as a calibration problem, which books a
tool in and still leaves the wrong die on it.
- Blocking a tool that is merely past its recall threshold. It is
usable; it just has to be booked.
- Treating the allowance exactly consumed as overdue through a strict
comparison on a computed fraction.
- Letting the arithmetic release a tool somebody withdrew.
Behavior contract (gate 3)
Register and job validation, set certification with all reasons,
elapsed-day computation, both consumed fractions, the governing
allowance, the three calibration states including the exactly-consumed
boundary, withdrawal precedence and the pool roll-up are exercised by
the gate 3 contract test:
scripts/test_q7026_crimp_tool_control.py against
scripts/q7026_crimp_tool_control_logic.py (stdlib unittest, offline).
Run:
python3 scripts/test_q7026_crimp_tool_control.py
Compliance
- ECSS standards are freely downloadable (ESA); cite the source and
paraphrase per standards-map.yaml.
- compliance: STANDARDS-REF, gated: false.
1---2name: q7026-crimp-tool-control3description: "Verify that a crimp tool, die and positioner set is certified for the contact in front of it and that its calibration is still live under ECSS-Q-ST-70-26C. Use when a tool is drawn from the pool for a flight harness and both the calendar interval and the crimp count since last calibration have to be honoured. Matches die and positioner to the contact part number and conductor range, consumes the allowance on whichever of elapsed days or accumulated cycles runs out first, honours a withdrawal in the register, and returns released, book-for-calibration, overdue or not-certified. Trigger: ecss, q-st-70-26, crimp-tool-certification, crimp-die-positioner-match, crimp-tool-calibration-interval, crimp-cycle-count-allowance, crimp-tool-withdrawal."4license: Apache-2.05compliance: STANDARDS-REF6standards:7 - id: ecss8 reference-only: true9gated: false10domain: space-systems11pack: space-systems12compatibility: "agentskills.io SKILL.md; any SKILL.md host (Claude Code, Hermes, OpenClaw)"13metadata:14 source: https://skillmd.com/skills/ashfordeou/q7026-crimp-tool-control15 domain: space-systems16 subdomain: ecss17 tags: [ecss, q-st-70-26-crimping-scope, q7026-crimp-tool-control, crimp-tool-certification, crimp-die-positioner-match, crimp-tool-calibration-interval, crimp-cycle-count-allowance, crimp-tool-withdrawal]18 version: 0.1.019 author: Aero Agent Skills20---2122# ECSS Crimping — Tool, Die and Calibration Control (space-systems/ecss/q7026-crimp-tool-control)2324Use when the task is the tooling step of ECSS-Q-ST-70-26C — deciding25whether a particular tool, die and positioner set may be drawn for a26particular crimp today, and whether its calibration is still live on27both the clock and the counter.2829## Domain quick reference3031- A crimp tool is certified as a set, not as a frame. Tool, die and32 positioner together are certified for a named contact family and a33 conductor cross-section range. Fitting a positioner borrowed from the34 next bench leaves the frame certified and the set not, and that is35 the failure this control exists to catch.36- Certification and calibration are separate questions asked in order.37 An uncertified set is wrong for this job whatever its calibration38 says, and reporting it as a calibration matter sends it to the wrong39 queue.40- Calibration is consumed two ways at once. Elapsed days eat the41 calendar allowance whether or not the tool was used; accumulated42 crimps eat the cycle allowance whether or not time passed. Whichever43 runs out first governs. A tool checked only against its date sticker44 can be six thousand crimps past its real allowance.45- There are three live states, not two. Below the recall threshold the46 tool is released; between the threshold and the full allowance it is47 still usable but has to be booked in; past the allowance it is out48 and the work it did is suspect.49- The allowance exactly consumed is a recall, not an overdue. A tool50 landing precisely on its interval has not yet exceeded it, and a51 strict comparison against a computed fraction is where this decision52 goes wrong on one machine and not another.53- A withdrawal in the register beats the arithmetic. The register54 records what a person decided; the fractions only say what the55 numbers allow.5657## Workflow58591. Validate the register entry: identifiers, die and positioner part60 numbers, the certified contact list, the certified conductor range,61 both calibration intervals, the cycle counter and the withdrawal62 flag.632. Validate the job: contact part number, conductor cross-section and64 the positioner the job calls for, folding part-number case.653. Test certification first — contact in the list, positioner matching,66 conductor inside the range inclusive of both bounds — and collect67 every reason rather than stopping at the first.684. Compute elapsed days from the last calibration date, refusing a date69 that precedes it.705. Express both allowances as consumed fractions and take the larger as71 governing, naming which one it was.726. Categorize the consumed fraction as released, book-for-calibration73 or overdue, treating the allowance exactly consumed as a booking.747. Let a withdrawal override everything, then an uncertified set, then75 the calibration state.768. Roll the pool up into released, to-book, blocked and whether the job77 can proceed at all today.7879## Pitfalls8081- Checking the frame and not the die or positioner. The set is the82 certified item.83- Reading the date sticker alone on a high-volume bench. The counter is84 the allowance that runs out first there.85- Reporting an uncertified set as a calibration problem, which books a86 tool in and still leaves the wrong die on it.87- Blocking a tool that is merely past its recall threshold. It is88 usable; it just has to be booked.89- Treating the allowance exactly consumed as overdue through a strict90 comparison on a computed fraction.91- Letting the arithmetic release a tool somebody withdrew.9293## Behavior contract (gate 3)9495Register and job validation, set certification with all reasons,96elapsed-day computation, both consumed fractions, the governing97allowance, the three calibration states including the exactly-consumed98boundary, withdrawal precedence and the pool roll-up are exercised by99the gate 3 contract test:100scripts/test_q7026_crimp_tool_control.py against101scripts/q7026_crimp_tool_control_logic.py (stdlib unittest, offline).102Run:103python3 scripts/test_q7026_crimp_tool_control.py104105## Compliance106107- ECSS standards are freely downloadable (ESA); cite the source and108 paraphrase per standards-map.yaml.109- compliance: STANDARDS-REF, gated: false.