ECSS Brazing — Brazement Records (space-systems/ecss/q7040-brazing-records)
Use when the task is the records clause of ECSS-Q-ST-70-40: deciding
whether the traveller behind a brazed joint actually evidences how the
joint was made, by whom, in which furnace run and with what result.
Domain quick reference
- A brazed joint cannot be re-opened. The record is the only history the
joint has, which is why a gap in it is a gap in the joint's evidence
and not a paperwork inconvenience.
- The procedure reference and its qualification record are two different
fields. The reference is a pointer; the qualification record is what
says the pointer leads to a process that was proved on coupons.
- Brazing is a manual-skill process even inside a furnace, because the
cleaning, the filler placement and the fixturing are done by hand.
That is why the operator is named on the record at all.
- Operator qualification fails in two independent ways. A certificate
expires on a date. Currency also lapses through disuse when the
operator has not run the process inside the continuity interval. A
certificate valid for another year says nothing about an operator who
last brazed nine months ago.
- The thermal profile is the process. A furnace run identity with no
trace behind it records that a furnace was switched on, and that is
all it records.
- The trace owes the ramp rate, the soak temperature, the soak duration
and the controlled cooling rate. Soak temperature alone hides a ramp
that took the assembly through a sensitisation range on the way up.
- The atmosphere log owes the vacuum level or the dew point. An
inert-gas cycle run wet is a different process from the qualified one
and leaves oxide the filler will not wet.
- Load thermocouples are not redundancy with the control channel. The
control channel reports the hot zone; the load channels are what say
a corner of the load ever reached soak.
- The inspection result closes the record. Without it the brazement has
a history and no verdict.
Workflow
- Take the process and the flux answer and build the required field set
from them, not from the fields the traveller happens to carry.
- Compare the record against that set and report the gaps in the order
the set requires them, so the chase list reads in working order.
- Test the operator twice: certificate expiry against the braze date,
and the gap since the last run of the same process against the
continuity interval. Refuse a record whose last-run date sits after
the braze date rather than treating it as a small transposition.
- For a furnace process, read the run record for its four profile
channels and for the number of load thermocouples, and report each
absent channel by name.
- Report every finding, not only the deciding one, so one recovery
round closes the record instead of three.
- Close the record only when no field is missing, the operator was
current on the day, and the furnace run carries its full trace.
Pitfalls
- Accepting the procedure reference as the qualification. The number on
the traveller is a claim that a qualified procedure exists; the
qualification record is the evidence that it does.
- Reading a valid certificate as a current operator. The two failure
modes are independent and the continuity one is the one nobody
notices, because nothing on the certificate changes when it happens.
- Treating a furnace run identity as furnace data. The identity says
which run; the trace says what the run did.
- Grading the soak and ignoring the ramp and the cooling rate. Both ends
of the cycle set the metallurgy, and a compliant soak with an
uncontrolled cool is a different joint.
- Counting the control thermocouple as load instrumentation. It reports
the furnace, not the part, and a single channel cannot distinguish a
cold corner from a uniform load.
- Closing the record on the first finding. A record chased one gap at a
time takes as many rounds as it has gaps, and each round loses a day.
Behavior contract (gate 3)
The process-driven required field set, the ordered gap list, the
two-way operator currency test with its inconsistent-date refusal, the
furnace profile channel and load-thermocouple checks and the overall
record verdict are exercised by the gate 3 contract test:
scripts/test_q7040_brazing_records.py against
scripts/q7040_brazing_records_logic.py (stdlib unittest, offline).
Run:
python3 scripts/test_q7040_brazing_records.py
Compliance
- ECSS standards are freely downloadable (ESA); cite the source and
paraphrase per standards-map.yaml.
- compliance: STANDARDS-REF, gated: false.
1---2name: q7040-brazing-records3description: "Audit the record a brazement owes and decide whether it closes on its own evidence. Use when a brazed joint has been made and the traveller has to prove how, because the joint cannot be re-opened to find out: build the required field set from the process and whether flux was used, name the gaps in the order the set requires them, test the operator against both the certificate expiry and the continuity interval that disuse runs out, read the furnace run for its ramp, soak, cooling and atmosphere channels and for enough load thermocouples to see a cold corner, and close only when nothing is outstanding. Trigger: ecss, q-st-70-40-brazing, brazement-record-set, braze-operator-continuity-interval, braze-furnace-thermal-profile-trace, braze-procedure-qualification-record, braze-load-thermocouple-coverage."4license: Apache-2.05compliance: STANDARDS-REF6standards:7 - id: ecss8 reference-only: true9gated: false10domain: space-systems11pack: space-systems12compatibility: "agentskills.io SKILL.md; any SKILL.md host (Claude Code, Hermes, OpenClaw)"13metadata:14 source: https://skillmd.com/skills/ashfordeou/q7040-brazing-records15 domain: space-systems16 subdomain: ecss17 tags: [ecss, q-st-70-40-brazing, q7040-brazing-records, brazement-record-set, braze-operator-continuity-interval, braze-furnace-thermal-profile-trace, braze-load-thermocouple-coverage]18 version: 0.1.019 author: Aero Agent Skills20---2122# ECSS Brazing — Brazement Records (space-systems/ecss/q7040-brazing-records)2324Use when the task is the records clause of ECSS-Q-ST-70-40: deciding25whether the traveller behind a brazed joint actually evidences how the26joint was made, by whom, in which furnace run and with what result.2728## Domain quick reference2930- A brazed joint cannot be re-opened. The record is the only history the31 joint has, which is why a gap in it is a gap in the joint's evidence32 and not a paperwork inconvenience.33- The procedure reference and its qualification record are two different34 fields. The reference is a pointer; the qualification record is what35 says the pointer leads to a process that was proved on coupons.36- Brazing is a manual-skill process even inside a furnace, because the37 cleaning, the filler placement and the fixturing are done by hand.38 That is why the operator is named on the record at all.39- Operator qualification fails in two independent ways. A certificate40 expires on a date. Currency also lapses through disuse when the41 operator has not run the process inside the continuity interval. A42 certificate valid for another year says nothing about an operator who43 last brazed nine months ago.44- The thermal profile is the process. A furnace run identity with no45 trace behind it records that a furnace was switched on, and that is46 all it records.47- The trace owes the ramp rate, the soak temperature, the soak duration48 and the controlled cooling rate. Soak temperature alone hides a ramp49 that took the assembly through a sensitisation range on the way up.50- The atmosphere log owes the vacuum level or the dew point. An51 inert-gas cycle run wet is a different process from the qualified one52 and leaves oxide the filler will not wet.53- Load thermocouples are not redundancy with the control channel. The54 control channel reports the hot zone; the load channels are what say55 a corner of the load ever reached soak.56- The inspection result closes the record. Without it the brazement has57 a history and no verdict.5859## Workflow60611. Take the process and the flux answer and build the required field set62 from them, not from the fields the traveller happens to carry.632. Compare the record against that set and report the gaps in the order64 the set requires them, so the chase list reads in working order.653. Test the operator twice: certificate expiry against the braze date,66 and the gap since the last run of the same process against the67 continuity interval. Refuse a record whose last-run date sits after68 the braze date rather than treating it as a small transposition.694. For a furnace process, read the run record for its four profile70 channels and for the number of load thermocouples, and report each71 absent channel by name.725. Report every finding, not only the deciding one, so one recovery73 round closes the record instead of three.746. Close the record only when no field is missing, the operator was75 current on the day, and the furnace run carries its full trace.7677## Pitfalls7879- Accepting the procedure reference as the qualification. The number on80 the traveller is a claim that a qualified procedure exists; the81 qualification record is the evidence that it does.82- Reading a valid certificate as a current operator. The two failure83 modes are independent and the continuity one is the one nobody84 notices, because nothing on the certificate changes when it happens.85- Treating a furnace run identity as furnace data. The identity says86 which run; the trace says what the run did.87- Grading the soak and ignoring the ramp and the cooling rate. Both ends88 of the cycle set the metallurgy, and a compliant soak with an89 uncontrolled cool is a different joint.90- Counting the control thermocouple as load instrumentation. It reports91 the furnace, not the part, and a single channel cannot distinguish a92 cold corner from a uniform load.93- Closing the record on the first finding. A record chased one gap at a94 time takes as many rounds as it has gaps, and each round loses a day.9596## Behavior contract (gate 3)9798The process-driven required field set, the ordered gap list, the99two-way operator currency test with its inconsistent-date refusal, the100furnace profile channel and load-thermocouple checks and the overall101record verdict are exercised by the gate 3 contract test:102scripts/test_q7040_brazing_records.py against103scripts/q7040_brazing_records_logic.py (stdlib unittest, offline).104Run:105python3 scripts/test_q7040_brazing_records.py106107## Compliance108109- ECSS standards are freely downloadable (ESA); cite the source and110 paraphrase per standards-map.yaml.111- compliance: STANDARDS-REF, gated: false.