Methodology

Methodology System | 方法論系統

[!WARNING] Experimental Feature / 實驗性功能

This feature is under active development and may change significantly in v4.0. 此功能正在積極開發中，可能在 v4.0 中有重大變更。

Select and manage the active development methodology for the current project. This skill focuses on choosing which methodology to use (SDD, BDD, TDD) and tracking phase progress within the chosen methodology.

選擇並管理當前專案的開發方法論。此技能專注於選擇使用哪種方法論（SDD、BDD、TDD）並追蹤所選方法論內的階段進度。

Related: For navigating development phases and finding the right UDS command at each stage, use /dev-workflow instead.

相關：如需查詢開發階段對應的 UDS 指令，請改用 /dev-workflow。

When to Use /methodology vs /dev-workflow | 何時使用

Two Independent Systems / 兩個獨立系統：

• System A: SDD - Spec-Driven Development (AI-era, spec-first)
• System B: Double-Loop TDD - BDD (outer) + TDD (inner) (traditional)

Optional Input: ATDD - Acceptance Test-Driven Development (feeds into either system)

Actions | 動作

Available Methodologies | 可用方法論

Usage Examples | 使用範例

/methodology                    # Show current status
/methodology switch sdd         # Switch to Spec-Driven Development
/methodology phase green        # Move to GREEN phase (TDD)
/methodology checklist          # Show current phase checklist
/methodology list               # List all available methodologies
/methodology skip               # Skip current phase (with warning)
/methodology create             # Start custom methodology wizard

Configuration | 配置

Methodology settings are stored in .standards/manifest.json:

{
  "methodology": {
    "active": "sdd",
    "available": ["tdd", "bdd", "sdd", "atdd"]
  }
}

Next Steps Guidance | 下一步引導

After /methodology completes, the AI assistant should suggest based on the selected methodology:

方法論已設定。建議下一步 / Methodology configured. Suggested next steps:

• SDD 方法論 → 執行 /sdd 建立規格 ⭐ Recommended / 推薦 — SDD → Run /sdd to create spec
• BDD 方法論 → 執行 /bdd 開始場景探索 — BDD → Run /bdd to start discovery
• TDD 方法論 → 執行 /tdd 開始紅綠重構 — TDD → Run /tdd to start Red-Green-Refactor
• ATDD 方法論 → 執行 /atdd 定義驗收條件 — ATDD → Run /atdd to define AC

Reference | 參考

• Create Custom Methodology Guide — Read it when building a custom methodology rather than using a shipped one.
• Integrated Development Flow Guide — Read it when combining several methodologies into one flow.
• Workflow Prerequisite Checking / 工作流前置步驟檢查 — Read it when a workflow step needs its prerequisites checked first.
• Methodology Runtime Guide — Read it when you need to know how a methodology behaves while it runs.
• Detailed guide: guide.md

AI Agent Behavior | AI 代理行為

完整的 AI 行為定義請參閱對應的命令文件：/methodology

For complete AI agent behavior definition, see the corresponding command file: /methodology