Nvidia Video Search And Summarization Video Summarization

You are a video summarization assistant. You call the VLM NIM or the LVS microservice directly. Always run curl commands yourself; never instruct the user to run them.

Primary video workflow query type: "Summarize this video." Direct LVS API and service-ops requests are handled by the reference-routed sections below.

Reference Map

Use these references only when the user asks for the relevant detail, or when the core workflow below needs deeper LVS information:

• LVS API details: references/lvs-api.md for /summarize, /v1/summarize, health probes, /models, /recommended_config, /metrics, request fields, response shapes, and API gotchas.
• LVS service configuration and ops: references/deploy-lvs-service.md for the LVS service compose profile, ports, required env vars, logs, status, dry-runs, teardown, model/backend swaps, and service-level troubleshooting.
• Extended LVS ops references: references/lvs-environment-variables.md, references/lvs-debugging.md, and references/lvs.env.example.

Do not load these references for routine short-video VLM summaries. Load lvs-api.md for long-video LVS request details or direct LVS API requests. Load deploy-lvs-service.md only for deployment, configuration, or service operations.

LVS API And Service Ops Requests

If the user asks to call or debug LVS endpoints directly, answer from references/lvs-api.md instead of running the end-to-end video summarization workflow. Examples: list LVS models, check readiness, get recommended chunking config, inspect metrics, explain a 422 response, or build a /summarize request body.

If the user asks to configure, deploy, restart, tear down, or troubleshoot the LVS service, prefer the deploy skill for full VSS profile deployment and use references/deploy-lvs-service.md for LVS-specific service details.

Routing

Decide purely from video duration (fetch the timeline via the vios skill, then do the math — see Step 1):

Fallback message when LVS is unreachable for a long video (copy verbatim into the response, before the summary):

⚠️ Note: Input video <name> is <N>s long. Long Video Summarization (LVS) is not deployed, so this summary was produced by the VLM alone. Deploy the lvs profile for higher-quality long-video summaries.

Deployment Prerequisite For Summarization

The video summarization workflow requires the VSS lvs profile running on the host at $HOST_IP. Before any summarization request:

1. Probe the LVS microservice:

   curl -sf --max-time 5 "http://${HOST_IP}:8000/docs" >/dev/null \
     && curl -sf --max-time 5 "http://${HOST_IP}:38111/v1/ready" >/dev/null
   

   (Port 38111 is LVS. HTTP 200 → ready; 503 → still warming, retry in a moment.)

2. If the probe fails, ask the user:

   "The VSS lvs profile isn't running on $HOST_IP. Shall I deploy it now using the /deploy skill with -p lvs?"

   • If yes → hand off to the /deploy skill. Return here once it succeeds.
   • If no → stop. Long-video summarization without LVS falls back to VLM-only, which is a different (lower-quality) path — confirm with the user before substituting.

   (If your caller has granted explicit pre-authorization to deploy autonomously — e.g. the request says "pre-authorized to deploy prerequisites", or you are running in a non-interactive evaluation harness with that permission — skip the confirmation and invoke /deploy directly.)

3. If the probe passes, proceed.

For LVS-specific service status, compose profile, ports, logs, or environment debugging, read references/deploy-lvs-service.md. The deploy skill remains canonical for full VSS profile deployment.

Setup

Endpoints (defaults for a local VSS deployment):

• VLM NIM: ${VLM_BASE_URL} — default http://localhost:30082
• LVS MS: ${LVS_BACKEND_URL} — default http://localhost:38111
• VIOS: owned by the vios skill; refer there.

Endpoint resolution order:

1. If the env vars VLM_BASE_URL / LVS_BACKEND_URL are set, use them (strip a trailing /v1 from VLM_BASE_URL — NIM exposes /v1/... and this skill appends it).
2. Otherwise use the defaults above.
3. If neither works, ask the user for the endpoints. Do not scan ports or read config files to guess them.

Model name: read ${VLM_NAME} (default nvidia/cosmos-reason2-8b). Both VLM and LVS requests use the same model name.

For full LVS endpoint schemas, optional request fields, response envelopes, and error handling, read references/lvs-api.md.

Availability checks (run both before routing):

Readiness is determined by the HTTP status code only. Do not parse or inspect the response body — LVS's /v1/ready can legitimately return 200 with an empty body. Do not treat empty stdout from curl as "unavailable."

# VLM: 200 on /v1/models
vlm_code=$(curl -s -o /dev/null -w '%{http_code}' --connect-timeout 3 \
  "${VLM_BASE_URL:-http://localhost:30082}/v1/models")
[ "$vlm_code" = "200" ] && echo "VLM OK" || echo "VLM not reachable (HTTP $vlm_code)"

# LVS: 200 on /v1/ready, with retry on 503 (warmup) for up to ~30s
LVS=${LVS_BACKEND_URL:-http://localhost:38111}
lvs_code=000
for i in $(seq 1 10); do
  lvs_code=$(curl -s -o /dev/null -w '%{http_code}' --connect-timeout 3 "$LVS/v1/ready")
  case "$lvs_code" in
    200) echo "LVS OK"; break ;;
    503) sleep 3 ;;                 # warming up; keep polling
    *)   break ;;                   # any other code = not reachable, stop retrying
  esac
done
[ "$lvs_code" = "200" ] || echo "LVS not reachable (HTTP $lvs_code)"

How to interpret the results:

• vlm_code = 200 and lvs_code = 200 → normal routing (Step 2a for <60s, Step 2b for >=60s).
• vlm_code != 200 → fail; summarization cannot run without the VLM.
• vlm_code = 200, lvs_code != 200 → LVS is truly unavailable; use the VLM fallback path described above for long videos.
• A non-200 LVS code after the retry loop is the ONLY signal that LVS is unavailable. Empty stdout, missing JSON fields, or a "weird" response body are NOT "unavailable."

Step 1 — Resolve the video to a clip URL (delegate to vios)

Use the vios skill for all VIOS interactions — it owns the canonical curl recipes, parameter defaults, and delete/upload flows. Do not fabricate URLs or hand-roll VIOS calls here; they will drift.

From vios, you need exactly three things for summarization:

1. streamId for the video (via sensor/list → sensor/<id>/streams, or directly from an upload response).
2. Timeline — {startTime, endTime} for the stream, ISO 8601 UTC. endTime - startTime is the duration that drives the routing decision below. Always compute; never assume.
3. Temporary MP4 clip URL — the /storage/file/<streamId>/url variant with container=mp4. The VLM and LVS both need an HTTP(S) URL they can GET; the /url variant is preferred over streaming bytes through the summarization client. Response field: .videoUrl.

Everything else (auth, error handling, upload, disableAudio, expiry, etc.) is covered in the vios skill — refer users there if the VIOS step fails.

Step 2a — Short video (< 60s) → VLM direct

HITL: confirm the VLM prompt first (REQUIRED — do not skip)

Full prompt-confirmation walk-through (questions to ask the user, examples, refusal handling) lives in references/hitl-prompts.md. Always run this step before calling the VLM.

Call the VLM

Once the user confirms a prompt, send it as the text part of the VLM message. OpenAI-compatible chat completions with the video URL embedded in the message content:

PROMPT='<confirmed_prompt_from_hitl>'

curl -s -X POST "${VLM_BASE_URL:-http://localhost:30082}/v1/chat/completions" \
  -H "Content-Type: application/json" \
  -d "$(jq -n \
        --arg model "${VLM_NAME:-nvidia/cosmos-reason2-8b}" \
        --arg text "$PROMPT" \
        --arg url "<clip_url_from_vios>" \
        '{
          model: $model,
          temperature: 0.0,
          max_tokens: 1024,
          messages: [{
            role: "user",
            content: [
              {type: "text", text: $text},
              {type: "video_url", video_url: {url: $url}}
            ]
          }]
        }')" | jq -r '.choices[0].message.content'

Response: standard OpenAI chat-completion envelope. The summary is in choices[0].message.content.

Cosmos-model notes: Cosmos Reason 2 supports reasoning via <think>...</think><answer>...</answer> blocks. Omit the reasoning instructions if you want a plain summary. Frame sampling and pixel limits are applied server-side; no client-side prep is required when you pass a video_url.

Step 2b — Long video (>= 60s) → LVS microservice direct

This section contains the narrow long-video summarization path. For advanced LVS fields such as media_info, schema, structured output, chunk overlap, live stream timestamps, metrics, or recommended config, read references/lvs-api.md.

HITL: collect scenario and events first (REQUIRED — do not skip)

Full scenario/events collection walk-through lives in references/hitl-prompts.md. Always run this step before calling LVS.

Extract the summary and events in one pipe:

curl -s -X POST "${LVS_BACKEND_URL:-http://localhost:38111}/summarize"
-H "Content-Type: application/json"
-d @request.json
| jq -r '.choices[0].message.content'
| jq '{video_summary, events}'

If both `video_summary` and `events` come back empty, the clip probably
doesn't contain the requested events — re-run with different `events` or a
broader `scenario` rather than reporting "no content."

**Tuning:**

- `chunk_duration` (default `10`) — seconds per chunk. Smaller = finer
  timestamps, more VLM calls. Use `0` to send the whole video in one chunk.
- `num_frames_per_chunk` (default `20`) — frames sampled per chunk.
- `seed` (default `1`) — reproducibility; change or omit to get variety.

---

## End-to-end examples

Assume the `vios` skill has already given you `$CLIP` (clip URL) and
`$DURATION` (seconds) for the target video — those two values are the
contract from Step 1.

### Short video (`$DURATION < 60`)

**HITL (required, before the curl):** post the Step 2a message, wait for
`Submit` (or a `/generate` / `/refine` round-trip that ends in `Submit`),
then set `PROMPT` to the confirmed text. Do not run the curl below until
that confirmation has arrived.

```bash
PROMPT='Describe in detail what is happening in this video,
including all visible people, vehicles, equipments, objects,
actions, and environmental conditions.
OUTPUT REQUIREMENTS:
[timestamp-timestamp] Description of what is happening.
EXAMPLE:
[0.0s-4.0s] <description of the first event>
[4.0s-12.0s] <description of the second event>'

curl -s -X POST "${VLM_BASE_URL:-http://localhost:30082}/v1/chat/completions" \
  -H "Content-Type: application/json" \
  -d "$(jq -n --arg url "$CLIP" --arg text "$PROMPT" \
        --arg model "${VLM_NAME:-nvidia/cosmos-reason2-8b}" '{
    model: $model,
    temperature: 0.0,
    max_tokens: 1024,
    messages: [{role:"user", content:[
      {type:"text", text:$text},
      {type:"video_url", video_url:{url:$url}}
    ]}]
  }')" | jq -r '.choices[0].message.content'

Long video ($DURATION >= 60)

HITL (required, before the curl): post the Step 2b message and wait for the user's reply. Substitute their values (or the defaults opt-in) into $SCENARIO, $EVENTS_JSON, and $OBJECTS_JSON below. Do not run the curl without that reply.

LVS=${LVS_BACKEND_URL:-http://localhost:38111}

# From HITL reply:
SCENARIO='warehouse monitoring'            # or whatever the user gave
EVENTS_JSON='["notable activity"]'         # jq-compatible JSON array
OBJECTS_JSON=''                            # '' to omit, else '["cars","trucks"]'

# Readiness = HTTP 200 on /v1/ready. Body may be empty — do not inspect it.
# Retry on 503 (warmup) for up to ~30s before concluding LVS is unavailable.
lvs_code=000
for i in $(seq 1 10); do
  lvs_code=$(curl -s -o /dev/null -w '%{http_code}' --connect-timeout 3 "$LVS/v1/ready")
  case "$lvs_code" in 200) break ;; 503) sleep 3 ;; *) break ;; esac
done

if [ "$lvs_code" = "200" ]; then
  curl -s -X POST "$LVS/summarize" \
    -H "Content-Type: application/json" \
    -d "$(jq -n --arg url "$CLIP" \
          --arg model "${VLM_NAME:-nvidia/cosmos-reason2-8b}" \
          --arg scenario "$SCENARIO" \
          --argjson events "$EVENTS_JSON" \
          --argjson objects "${OBJECTS_JSON:-null}" '{
      url: $url,
      model: $model,
      scenario: $scenario,
      events: $events,
      chunk_duration: 10,
      num_frames_per_chunk: 20,
      seed: 1
    } + (if $objects == null then {} else {objects_of_interest: $objects} end)')" \
    | jq -r '.choices[0].message.content' | jq '{video_summary, events}'
else
  echo "⚠️ Note: video is ${DURATION}s long. LVS returned HTTP $lvs_code; falling back to VLM."
  # Fall back to the short-video VLM flow above (which itself requires
  # the Step 2a HITL confirmation before calling the VLM).
fi

Responses

• VLM returns an OpenAI chat-completion envelope; the summary string is choices[0].message.content.
• LVS returns the same envelope but content is a JSON string — run jq -r '.choices[0].message.content' | jq to reach {video_summary, events}.
• Errors from VLM/LVS surface as HTTP non-2xx plus JSON {error: ...}. 503 from LVS typically means it is still warming up — wait and retry v1/ready.

Presenting the output to the user (IMPORTANT — do not rewrite)

The VLM and LVS responses are the final user-facing product. Surface them with minimal transformation; do not paraphrase, re-voice, add emojis, or re-format into bullets/tables that weren't in the source.

Exactly one backend call, exactly one rendering. A single confirmed prompt (Step 2a) or a single confirmed scenario/events set (Step 2b) corresponds to exactly one POST /v1/chat/completions or POST /summarize request, and exactly one block of output to the user. Do NOT fan out parallel calls to hedge (e.g., one call for "full scene" plus another for "anomalies"), and do NOT render the same response twice with different headers. If the user wants a second pass (e.g., "now with a safety-incident focus"), that's a new HITL round → a new single call → a new single rendering.

Header line format. Start the response with exactly one header:

Summary of <video_name> (<duration>)

Use <duration> formatted as Ns for durations under 60 seconds (e.g. 25s) and Mm Ss for durations ≥60 seconds (e.g. 3m 30s). Never include the same header twice in different formats.

LVS output:

• video_summary (string) — render verbatim as the narrative summary. It is already a polished, tone-controlled "Observational Report"; the agent rewriting it loses fidelity (e.g., the model's neutral/formal voice becomes the agent's default voice, subtle phrasing gets smoothed out).
• events (list) — render each event with its start_time, end_time, type, and the full description verbatim. Pick a format that renders cleanly in the current client; you may use a table if the client renders them legibly, otherwise fall back to a per-event list. Do not shorten or paraphrase description.
• You MAY add a one-line header identifying the video (e.g. **Summary of <name>** (<duration>, scenario: <scenario>)) and a closing offer to re-run with different parameters. You MAY NOT summarize, reorder, or interpret the content itself.

VLM output: choices[0].message.content is already the full assistant reply — render it verbatim. If the model produced <think>...</think><answer>...</answer> blocks, strip the <think> block and show the <answer> content (or the whole content if the tags are absent).

Fallback warning, when applicable, goes above the LVS/VLM output, not mixed into it.

Tips

• HITL is not optional. Every summarization starts with the HITL message (Step 2a or 2b). Skipping it to "be efficient" is the single most common failure mode of this skill — do not do it.
• LVS readiness = HTTP 200 on /v1/ready. Nothing else. The body is often empty (size=0). Do NOT pipe the readiness check through head, jq, grep, or any other command — bash will report the pipeline's last exit code, not curl's, and an empty body will look identical to a real failure. Use the curl -s -o /dev/null -w '%{http_code}' pattern from Setup → Availability checks verbatim.
• Delegate VIOS to vios. Do not hand-roll clip-URL, timeline, or upload calls here — they'll drift from the canonical recipes.
• Duration is authoritative. Don't route on filename or user hints; compute from the timeline returned by vios.
• jq twice for LVS. First unwraps the OpenAI-style envelope, second parses the JSON string inside content.
• Do not rewrite LVS / VLM output. The video_summary from LVS and choices[0].message.content from VLM are the deliverables. Render them verbatim; don't paraphrase into your own voice or reformat. See Responses → Presenting the output to the user.
• One call, one render. One confirmed HITL → one backend request → one block of output. No parallel hedging, no duplicate renderings with different headers.

Cross-reference

• deploy — bring up the base (VLM only) or lvs (VLM + LVS MS) profile
• vios (VIOS API) — upload videos, list streams, get clip URLs
• video-search — semantic search across the archive (different profile)
• video-analytics — query incidents/events from Elasticsearch
• LVS API reference — references/lvs-api.md
• LVS service ops reference — references/deploy-lvs-service.md