Tdd

Test-Driven Development

Philosophy

Core principle: Tests should verify behavior through public interfaces, not implementation details. Code can change entirely; tests shouldn't.

Good tests are integration-style: they exercise real code paths through public APIs. They describe what the system does, not how it does it. A good test reads like a specification - "user can checkout with valid cart" tells you exactly what capability exists. These tests survive refactors because they don't care about internal structure.

Bad tests are coupled to implementation. They mock internal collaborators, test private methods, or verify through external means (like querying a database directly instead of using the interface). The warning sign: your test breaks when you refactor, but behavior hasn't changed. If you rename an internal function and tests fail, those tests were testing implementation, not behavior.

See tests.md for examples and mocking.md for mocking guidelines.

Seams — where tests go

A seam is the public boundary you test at: the interface where you observe behavior without reaching inside. Tests live at seams, never against internals.

Test only at pre-agreed seams. Before writing any test, write down the seams under test and confirm them with the user. No test is written at an unconfirmed seam. You can't test everything — agreeing the seams up front is how testing effort lands on the critical paths and complex logic instead of every edge case.

Ask: "What's the public interface, and which seams should we test?"

Seam placement is a design decision, not a testing one. When the answer is "there isn't a good seam here," that's a design problem — run the codebase-design skill for the vocabulary and the deep-module principles before contorting a test around the current shape.

Anti-Pattern: Tautological Tests

The assertion recomputes the expected value the way the code does — expect(add(a, b)).toBe(a + b), a snapshot derived by hand the same way, a constant asserted equal to itself. The test passes by construction and can never disagree with the code.

Expected values must come from an independent source of truth: a known-good literal, a worked example, the spec. See tests.md.

Anti-Pattern: Horizontal Slices

DO NOT write all tests first, then all implementation. This is "horizontal slicing" - treating RED as "write all tests" and GREEN as "write all code."

This produces crap tests:

• Tests written in bulk test imagined behavior, not actual behavior
• You end up testing the shape of things (data structures, function signatures) rather than user-facing behavior
• Tests become insensitive to real changes - they pass when behavior breaks, fail when behavior is fine
• You outrun your headlights, committing to test structure before understanding the implementation

Correct approach: Vertical slices via tracer bullets. One test → one implementation → repeat. Each test responds to what you learned from the previous cycle. Because you just wrote the code, you know exactly what behavior matters and how to verify it.

WRONG (horizontal):
  RED:   test1, test2, test3, test4, test5
  GREEN: impl1, impl2, impl3, impl4, impl5

RIGHT (vertical):
  RED→GREEN: test1→impl1
  RED→GREEN: test2→impl2
  RED→GREEN: test3→impl3
  ...

Workflow

1. Planning

Before writing any code:

• Confirm with user what interface changes are needed
• Write down the seams under test and confirm them with the user
• Confirm with user which behaviors to test (prioritize)
• Identify opportunities for deep modules (small interface, deep implementation)
• Design interfaces for testability
• List the behaviors to test (not implementation steps)
• Get user approval on the plan

Ask: "What should the public interface look like? Which behaviors are most important to test?"

You can't test everything. Confirm with the user exactly which behaviors matter most. Focus testing effort on critical paths and complex logic, not every possible edge case.

2. Tracer Bullet

Write ONE test that confirms ONE thing about the system:

RED:   Write test for first behavior → test fails
GREEN: Write minimal code to pass → test passes

This is your tracer bullet - proves the path works end-to-end.

3. Incremental Loop

For each remaining behavior:

RED:   Write next test → fails
GREEN: Minimal code to pass → passes

Rules:

• One test at a time
• Only enough code to pass current test
• Don't anticipate future tests
• Keep tests focused on observable behavior

4. Refactor

After all tests pass, look for refactor candidates:

• Extract duplication
• Deepen modules (move complexity behind simple interfaces)
• Apply SOLID principles where natural
• Consider what new code reveals about existing code
• Run tests after each refactor step

Never refactor while RED. Get to GREEN first.

Checklist Per Cycle

[ ] Test describes behavior, not implementation
[ ] Test uses public interface only
[ ] Test would survive internal refactor
[ ] Code is minimal for this test
[ ] No speculative features added