Rat Dse Policy

DSE Policy

What Makes DSE Different from Standard Phase 1→3

Design Priority Order

1. Functional Correctness (highest) — Every required feature works exactly
2. Interface Compliance — Ports, protocols, timing match Architecture
3. Timing/Performance — Throughput, latency targets met
4. Area/Power (lowest)

Document-as-Memory

All exploration results captured in design artifacts (docs/, reviews/) so downstream phases can reference DSE rationale without repeating exploration.

DSE Methodology

Algorithm Comparison Matrix (per functional block)

For each major functional block, enumerate 2-4 algorithmic approaches:

Fixed-Point Feasibility Analysis

• Minimum bit-width for acceptable precision
• Rounding mode impact (truncate vs round-half-up vs convergent)
• Precision vs area trade-off (e.g., 12-bit vs 16-bit internal paths)

HW-Friendly Algorithm Modifications

• Simplifications that reduce gate count with minimal quality loss
• Regularization of memory access patterns for SRAM efficiency
• Opportunities for resource sharing between blocks

Architecture Candidate Format

For each candidate (2-3 required):

• Block diagram (D2)
• Estimated area breakdown (LUT/FF for FPGA, gate count for ASIC)
• Throughput/latency estimate
• Memory bandwidth requirement
• Critical path identification

Output: docs/phase-2-architecture/architecture-candidates.md

User Decision Points

Two mandatory AskUserQuestion interactions:

1. Algorithm selection: After algorithm exploration, present candidates with quantitative matrix
2. Architecture selection: After architecture candidate exploration, present trade-off matrix

Decisions recorded as ADRs:

• docs/decisions/ADR-001-algorithm-selection.md
• docs/decisions/ADR-002-architecture-selection.md

Functional → Architectural C Model Transformation

When input_mode == "transform" (user-provided functional C model):

1. Analyze: Identify function boundaries, data flow, global state
2. Map: Map functions to architecture.md block boundaries
3. Restructure:
   • Split monolithic functions into per-block functions matching architecture blocks
   • Replace global memory access with ext_mem_read()/ext_mem_write() abstraction
   • Convert global state into per-block context structs (context_t)
   • Add block-level I/O interfaces matching architecture port definitions
4. Verify: Run same test vectors through original and transformed models
   • Bitexact match required — any mismatch is a transformation bug

Output: refc/.c (restructured), refc/include/.h. C11, no clock/reset, DPI-C compatible.

Optional Evaluations

Quantitative RD evaluation: If ref C model encoder is buildable and test sequences are available, invoke /rtl-agent-team:codec-rd-eval for BD-PSNR measurements.

Decoder conformance: If ref C model decoder exists and conformance bitstreams are available, invoke /rtl-agent-team:codec-conformance-eval.

Execution Rules

Dual-Layer Phase Gates

Phase 1→2, Phase 2→3, and Phase 3 completion require BOTH Artifact Gate + Quality Gate. Quality Gate verdicts: PASS or FAIL + findings[]. Max 2 retries per gate.

Scratchpad Convention

.rat/scratch/phase-{N}/round-{R}-{agent}.md On gate PASS: consolidate to reviews/, clean scratch.

Termination

After Phase 3 Quality Gate PASS + self-critique re-run, present results to user. Do NOT proceed to Phase 4. DSE produces a pre-implementation package for user review.

Phase Gate Definitions

Phase 1→2 (Research → Architecture DSE)

Artifact Gate: iron-requirements.json + open-requirements.json + io_definition.json + timing_constraints.json + domain-analysis.md exist Quality Gate:

• Iron/open requirements complete and consistent
• Ambiguity score ≤ 0.5 for all iron requirements
• Algorithm comparison matrices complete with quantitative data
• Algorithm selection ADR recorded with user's decision
• Save: reviews/phase-1-research/research-review.md
• Verdict: PASS if requirements clear, algorithms selected with rationale

Summary Validation: docs/phase-1-research/phase-1-summary.md

Phase 2→3 (Architecture DSE → μArch + BFM)

Artifact Gate: architecture.md + architecture-candidates.md + refc/.c + iron-requirements.json (P2, REQ-A-) exist Quality Gate:

• 3-round iterative review converged (or user-approved)
• Feature Coverage: 100% REQ (REQ-F-, REQ-P-, REQ-A-*) mapped to architecture blocks
  • Save: reviews/phase-2-architecture/feature-coverage.md
• All OPEN-1-* resolved with rationale in iron-requirements.json (REQ-A-*)
• Compliance check against P1 iron: PASS
• Architecture candidates document with quantitative comparison
• Architecture selection ADR with user's decision and rationale
• Ref C model architecturally structured (block boundaries match architecture.md)
• If transformed: bitexact equivalence verified
• Architecture Diagram saved
• Save: reviews/phase-2-architecture/architecture-review.md
• Verdict: PASS if 100% coverage AND architecture selected AND ref model consistent AND compliance PASS

Summary + ADR: phase-2-summary.md + ADRs (including algorithm + architecture selection)

Escalation & Stop Conditions

• Algorithm candidates cannot be differentiated → ask user for priority (area vs throughput vs quality)
• Architecture candidates too similar → ask user for dominant constraint
• Functional C model too complex to transform → report, suggest manual restructuring guidance
• Phase 1 Quality Gate fails after 2 retries → ask user to clarify spec
• Phase 2 Quality Gate fails after 2 retries → ask user for architecture direction
• Ref model transformation breaks bitexact equivalence → report divergence, ask user to verify original

Coding Convention Summary

• Port prefix: i_, o_, io_. Clock: {domain}_clk. Reset: {domain}_rst_n
• C ref model: C11, no clock/reset, ext_mem abstraction, DPI-C compatible

Phase 3 Gate Definition

Phase 3 Entry (requires Phase 2 completion)

Artifact Gate: architecture.md + refc/.c + iron-requirements.json (P2, REQ-A-) exist Quality Gate: Phase 2→3 gate above must have passed (compliance PASS, all OPEN-1-* resolved)

Phase 3 Completion (μArch + BFM → Self-Critique)

Artifact Gate: docs/phase-3-uarch/.md + bfm/src/.cpp (or bfm/src/*.c) + iron-requirements.json (P3) exist Quality Gate:

• μArch review converged (min 2 rounds)
• BFM compiles and simulates, outputs match ref C model
• REQ→μArch traceability 100% coverage
• Clock domain map and protocol assignments complete
• Verdict: PASS if all above satisfied

Note: Phase 3 produces C/SystemC BFM, NOT SystemVerilog RTL. BFM is the executable μArch model. DPI bridge template is prepared for future RTL comparison in Phase 4, but no RTL is written in DSE.

Self-Critique Protocol

After Phase 3 Quality Gate PASS, the orchestrator performs self-critique BEFORE presenting results to the user:

1. Critique agent reviews the complete P1→P3 output:

   • Spec completeness: any requirements missed or vague?
   • Architecture soundness: any structural weakness, bottleneck, or over-engineering?
   • μArch feasibility: pipeline depths realistic? memory bandwidth achievable?
   • BFM correctness: any untested paths? ref model coverage gaps?
   • Iron/open quality: acceptance_criteria measurable? resolution rationale substantive?
   • Cross-phase consistency: do P3 decisions contradict P1/P2 iron requirements?

2. Output: reviews/dse-self-critique.md with findings rated HIGH/MEDIUM/LOW

3. Re-run: Run Phase 1→3 again incorporating all critique findings

   • HIGH findings: must be addressed (fix spec, revise architecture, redesign μArch)
   • MEDIUM findings: should be addressed
   • LOW findings: note for user, no action required

4. Result: Second pass produces refined pre-implementation package

Trial Comparison Protocol

When the user requests another iteration (not satisfied with results), a new trial is created in a git worktree:

Trial Management

• Trial 1: runs on current branch, results committed
• Trial N (N≥2): created via Agent(isolation="worktree") with user feedback
• Each trial produces a complete P1→P3 artifact set

Comparison Method

After Trial N completes, compare against the current best trial:

1. Independent compliance checks: invoke compliance-checker separately on EACH trial's P1→P3 chain

   • Run compliance-checker on current best trial → compliance-report-current.json
   • Run compliance-checker on new trial → compliance-report-new.json
   • Compare: which trial covers more acceptance_criteria? fewer VIOLATION items? more measurable iron?

2. Quantitative comparison table (presented to user):

3. Selection: user chooses which trial to keep
   • If Trial N selected → merge worktree branch into main, commit as new baseline
   • If current best selected → discard Trial N worktree (no changes)

Iteration Loop

repeat:
  AskUserQuestion("결과가 만족스러운가? (yes/no)")
  if yes → done (pre-implementation package ready for Phase 4)
  if no  → collect user feedback
         → create new trial (worktree)
         → run P1→P3 with feedback
         → compare trials
         → user selects better trial

Final Checklist

• Phase 1: iron-requirements.json, open-requirements.json, io_definition.json, timing_constraints.json exist
• Phase 1: domain-analysis.md contains algorithm comparison matrices (not just selection)
• Phase 1: Algorithm selection ADR recorded with user's decision
• Phase 1: research-review.md PASS, phase-1-summary.md generated
• Phase 1: Ambiguity score ≤ 0.5
• Phase 2: architecture-candidates.md contains 2+ candidates with quantitative comparison
• Phase 2: Architecture selection ADR recorded with user's decision
• Phase 2: architecture.md exists (refined from selected candidate)
• Phase 2: iron-requirements.json (REQ-A-*) with resolved_from tracking
• Phase 2: refc/*.c exists
• Phase 2: If transform mode — bitexact equivalence verified
• Phase 2: architecture-review.md PASS, feature-coverage.md 100%
• Phase 2: Compliance check against P1 iron: PASS
• Phase 3: docs/phase-3-uarch/*.md per-module specs exist
• Phase 3: iron-requirements.json (REQ-U-*) with resolved_from tracking
• Phase 3: BFM (bfm/src/.cpp or bfm/src/.c) compiles and matches ref C model
• Phase 3: clock-domain-map.md, protocol-assignments.md exist
• Phase 3: req-uarch-traceability.md with 100% REQ coverage
• Phase 3: Compliance check against P1+P2 iron: PASS
• Phase 3: Zero remaining open items
• Self-critique: reviews/dse-self-critique.md produced
• Self-critique: Phase 1→3 re-run with critique findings incorporated
• User satisfaction check performed
• If multiple trials: comparison table presented, better trial selected
• Scratch directories cleaned
• State file updated with all phases completed
• Pipeline did NOT proceed to Phase 4